Surrey · TR19 inspections and grease testing

TR19 Inspection in Banstead

TR19 inspection for Banstead and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.

  • Missing access panels found on survey
  • Sites with gaps in their extract records
  • Uncertainty over how often to clean

TR19 inspection across Banstead

TR19 inspection in Banstead

If you’ve taken over a kitchen in Banstead and do not know when the extract was last cleaned, an inspection is the place to start. We survey the system, measure the grease and tell you what needs doing, before any cleaning is booked. The work covers pre-clean surveys, insurer audits and wet film thickness tests, and common reasons people get in touch are systems that need surveying before cleaning and cleaning intervals that may not suit the kitchen.

Size doesn’t change the work: a kitchen in a place like Banstead gets the whole system cleaned, canopy to discharge. The visit is booked around your opening hours, and the journey is planned ahead.

Insurers, fire officers and environmental health officers all look at records. That is why every job is written up in a report with photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.

Place
Banstead (SM7)
Region
Surrey
Reporting
TR19® certificate and photo report
Quote
A fixed price before we start
Working hours
After hours by arrangement; emergencies any time
Telephone
0345 646 2711
Last updated
30 October 2026
Duct Doctor duct and vent cleaning vans lined up in a car park with the team

What your team can do, and what needs us

Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that’s where we come in.

Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. That’s our job.

Kitchen extracts in Banstead

The FSA’s food hygiene register shows about 38 restaurants, cafés and works canteens and about 11 sandwich bars and takeaways within 1.5 miles or so of the middle of Banstead. A WFTT or DTT reading tells each of those kitchens whether its grease is staying under the 200-micron mean. Kitchens in Banstead get their food hygiene inspections from Reigate and Banstead council. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. Our report lists what was cleaned and when, which is useful to have ready. Banstead is covered by Surrey Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.

Volunteers running a hall kitchen near Church of All Saints, or anywhere in Banstead, may not know when the extract was last cleaned, and a grease test settles it. School kitchens, at schools like St Anne's Catholic Primary School for example, are typically cleaned in the holidays so no lunches are lost.

Banstead is about 3 miles west of Coulsdon, in Surrey. For TR19 inspection in and around Banstead, it’s easy to get a fixed quote: please give us a ring on 0345 646 2711 or use the quote form. We work across South East England and London, including Banstead. Banstead is one of 395 towns, villages and districts in Surrey where we work for TR19 inspection. There’s also a page for London, about 13 miles away.

All of SM7 is within our area for TR19 inspection, from busy streets to back roads. Streets in the area include High Street, Glenfield Road and Highview Path, all of which we cover for TR19 inspection. Main roads around Banstead include the A217 and A2022, so getting to you is simple for evening and night visits. We also cover Woodmansterne (1 mile south-east), Shanklin Village (2 miles north), Chipstead (2 miles south-east), Little Woodcote (2 miles north-east) and Woodcote Green (2 miles north-east). Further out, we also cover Epsom (3 miles west), Horley (10 miles south), Redhill (6 miles south), Ewell (3 miles north-west), Reigate (6 miles south) and Walton-on-Thames (10 miles north-west).

Around Banstead

We work in commercial kitchens and buildings around The Woolpack pub, Fames Rough and Priory Preparatory School and the streets around them. Banstead’s nearest station is Banstead station, roughly 0.7 miles north-west. Nearby you will also find Walton on the Hill (3.6 miles south-west) and The Ashley Centre (3 miles west). The countryside around Banstead includes Colley Hill and Cuddington Meadows.

Map of Banstead © OpenStreetMap contributors

What the work involves, part by part

Schools, hospitals and care homes

Hospital and care home kitchens can cook all day, every day. Testing shows if the cleaning interval keeps pace.

Restaurants, pubs and hotels

A kitchen running from breakfast to late service builds grease quickly. Readings show if the cleans are frequent enough.

Signs you need TR19 inspection in Banstead

Grease is fuel. Flames from the range can be pulled into the canopy and travel through the ducts to other parts of the building. Knowing how much there is lets you act before it becomes a hazard.

It’s time to book a visit if you see:

  • Cleaning intervals that may not suit the kitchen
  • Insurance renewals needing proof of TR19 cleaning
  • Post-clean verification after another contractor’s clean
  • Surveys needed before quoting a full clean

Healthcare kitchens, like those at hospitals such as Banstead Hospital (about 0.9 miles north-east), often cook for long hours, which puts them in BESA’s heavier-use bands.

What to look for in a quote

  • When they can work, and whether that is outside your opening hours
  • If they look at the system before pricing
  • Whether inaccessible sections are listed on the report
  • Whether the whole system is included, or only the parts that are easy to reach

Questions to ask before booking

FAQs for Banstead

Which fire authority looks after Banstead?

It’s Surrey Fire and Rescue Service, which covers Banstead. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.

Do you work in villages like Banstead?

Yes. Villages and rural sites across the South East are part of our work, Banstead included. Just mention lanes, gates or anything else about the site when you book.

What is a WFTT or DTT grease test?

WFTT and DTT are the two methods for measuring grease thickness, in microns. We take readings at set points from canopy to fan.

How do you protect the area?

We start with protection: sheeting over floors, worktops and anything close to the work. The area is left tidy, with our waste taken away.

What grease levels does TR19 allow?

Between cleans, the mean should stay at 200 microns or below, and anywhere at 500 microns or more needs spot cleaning right away.

Will you produce a report for our insurer?

Yes. Our TR19 audits cover readings, photos, access and a recommended cleaning interval. You can pass it straight to your insurer or broker.

Is a quote from pictures possible?

Yes, if we can see what we need. If not, a site survey comes first, and the quote follows that.

Can one contract cover all our sites?

Yes. Our area covers London and the South East, so sites at different addresses can be planned together as one programme. Each site gets its own report and photos.

How we price TR19 inspection

Sites vary more than people expect. What affects the quote:

  • Site rules, permits and inductions
  • Whether we need access equipment or extra panels
  • The number of sites or systems
  • The scale of the work

What you pay depends on the size of the system, the condition it’s in and access to every part of it. You get a fixed price before work begins, so you know where you stand.

Asking for a quote

When you contact us, it’s useful to have:

  • Photos showing the whole system and its surroundings
  • When the site is open and when it’s quiet
  • The paperwork from the last visit, if you have it
  • Close-ups of filters, grilles, hatches or access panels

Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, the quote is fixed before any work is booked.

Why deal with it now?

If a kitchen in Banstead has been cleaned on the same calendar for years, there’s no way to know if that interval is right without measuring. Testing gives you the evidence to set it properly. It’s easy to lose track of when the work was last done on a quieter site.

Every site is different, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all make a difference.

Why book with us

  • Work around your opening hours, with 24/7 emergency cover
  • CHAS and SafeContractor accredited, with ISO 9001
  • Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
  • Ventilation hygiene specialists since 2009

See our cost guide or how to check a contractor.

Landlords, agents and facilities managers

Keeping records across a portfolio is half the battle. Each visit produces a dated report with pictures, ready to show insurers, fire officers or EHOs.

Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we’ll send a fixed quote.

How it works

We turn up at the time agreed with you, which is often after service, overnight or at a weekend. Anything that needs to be off for the work is switched off and left to cool first, and the area around the work is covered and protected. The work itself takes anything from an hour for a small canopy and short duct to a good part of a day for a large site. For a site near Banstead, the work is booked around your opening hours, evenings and weekends included.

  1. The visit is arranged for when the kitchen is not busy.
  2. The system is checked from canopy to discharge.
  3. Grease thickness is measured at set points by WFTT or DTT.
  4. Photos are taken at each point, and access gaps noted.
  5. You get a report with readings, photos and recommendations.

Before we arrive

  • Clear the space around the work
  • Allow time for equipment near the work to be turned off and cool down
  • Agree a time when the area can be out of use

Ask for a quote

We do not publish a price list, because every site is different. We look at your system first, from pictures or on a visit, then send a fixed quote. To get going, phone us on 0345 646 2711 or drop us a line.

Get a price

Advice

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London