Kent · Kitchen extract cleaning
Kitchen Extract Cleaning in Milstead
For kitchen extract cleaning in Milstead, one call is all it takes, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- A kitchen with no current TR19 certificate
- A TR19 certificate needed for the insurer
- Ductwork thick with old, hardened grease
Why it’s worth doing now in Milstead
TR19® isn’t law, but the Regulatory Reform (Fire Safety) Order 2005 is. It puts a duty on the responsible person to assess and reduce fire risk, which in a kitchen includes the grease in the extract. TR19 is the benchmark insurers, fire officers and EHOs look to. With notice, the visit to Milstead can be fitted around your bookings and events.
A single site or a whole portfolio, we price it on the same basis: what needs doing, how we get to it and when. The price is fixed before work begins.
Why us?
- Photo reports with every job
- Fixed quotes, usually within one working day
- Accredited under CHAS and SafeContractor, with ISO 9001
- Work around your opening hours, with 24/7 emergency cover
Take a look at what affects the cost or our accreditations.
Kitchen duct cleaning in Milstead
A closed kitchen isn’t earning, so the timing of a clean matters. We work evenings, overnight and at weekends, or during holidays where a site closes for them. With the equipment off and cool and the area sheeted, we clean and hand the kitchen back ready for the next service. Common call-outs are for extraction mentioned at an environmental health visit and grease smells coming from the extract, across discharge points, extract fans and plenums and filters. Whether you call it kitchen extract cleaning, TR19 cleaning or kitchen duct cleaning, in Milstead it means the same thing to us: the whole system, cleaned and certificated.
A clean in Milstead covers the canopy, plenum, filters, ductwork, risers and fan, and the discharge where it can be reached.
Somewhere as small as Milstead, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Each still has a canopy and duct that collect grease.
Duct Doctor has been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
- Location
- Milstead (ME9)
- Region
- Kent
- Reporting
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Do you need kitchen extract cleaning in Milstead?
Cooking fat leaves the pan as a fine vapour. Once it cools inside the ductwork, it condenses onto every surface it touches, and the layer grows a little with every meal cooked. Filters catch some of it, but never all.
It’s time to book a visit if you see:
- Cleaning needed before an insurance renewal or survey
- An extract that no longer clears the smoke
- An inspection that picked up a dirty extract
- A new tenancy or takeover with no cleaning history
If you run a church or community hall kitchen, near Church of St Mary and the Holy Cross or elsewhere in Milstead, its extract still collects grease from every lunch and event.
What your quote should include
- What hours they’ll be on site
- Whether a written report and photos are included
- Proof of accreditation you can verify
- Proof of insurance
Places near Milstead
Other services in Milstead
Different parts, different methods
Grease filters
We clean the grease filters as part of the job, and refitted so they sit properly in the housing. We’ll tell you if any need replacing.
Ductwork and risers
Bends and changes of direction trap more grease than straight runs. Those are among the points where we take readings before and after, so the report shows the difference.
Milstead questions
Can the work in Milstead be done at night or at weekends?
Yes, we can come after you close and finish before you open. The work in Milstead can fit around your hours. Just phone us on 0345 646 2711 or email us with your opening times and we’ll plan around them.
Which fire authority looks after Milstead?
That is Kent Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
What do you do to protect the area?
We cover floors and nearby surfaces with sheeting before we start, and waste is contained as we go. At the end, the area is cleaned down.
Are you a BESCA Vent Hygiene Elite member?
We’re members of Vent Hygiene Elite, the scheme run by BESCA, and we clean to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
Where does the waste go?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. We don’t leave it behind.
What types of premises do you cover?
We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, plus food production and leisure sites.
What is TR19?
BESA’s ventilation hygiene specification, with two parts that matter most here: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It isn’t legislation, but it’s the standard people check against.
Do you work in Milstead?
Yes. We work in Milstead and the rest of Kent, as part of our work across South East England and London. To book, ring 0345 646 2711 or email us.
Staff cleaning versus specialist work
Away from the kitchen, the in-house job is mainly checking: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
Staff cleaning does not replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
Keeping the system healthy
To keep the system working properly between visits:
- Don’t let the canopy gutters overflow
- Tell us when the extract starts to drip or smell
- Make sure every filter is fitted before cooking
- Switch the fan on before cooking starts
If we couldn’t get into part of the duct, the report says so plainly. That is part of an honest TR19 clean, not a failing, and we can fit access panels so it’s reached next time.
Tell whoever looks after the system when something changes. Grease dripping from the canopy, a burning smell or a fan that sounds rough are all signs of build-up, and a grease thickness test can confirm it.
When it’s something else
Before you book, it helps to know what’s not included:
- Ductwork that is corroded, split or leaking (that is for a ductwork contractor)
- A canopy that is too small or a system that was badly designed
- Fire dampers that will not close (that needs damper testing and remedials)
If you’re not sure, just phone us on 0345 646 2711 or send us an email and we will give you a straight answer before booking.
Where we work
- Canopies and hoods
- Vertical risers
- Plenums and filters
- Horizontal duct runs
- Extract fans
- Discharge points
Kitchen extract cleaning around Milstead
Milstead is covered by Kent Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. Food hygiene inspections in Milstead are the job of Swale council’s environmental health team. Extraction counts as kitchen equipment, so its condition can come up on the day. Before-and-after photos from each clean are a simple way to show the extract is in hand.
Bursars and site managers at schools such as Milstead and Frinsted Church of England Primary School tend to book extract cleaning for when the kitchen is empty.
Milstead is about 3 miles south of Sittingbourne, in Kent. We carry out kitchen extract cleaning for commercial premises of every kind in Milstead and the rest of Kent. Milstead is one of 922 places in Kent where we work for commercial clients. There’s also a page for Maidstone, about 9 miles away.
Work in ME9 follows the same survey, fixed quote and written report as everywhere else we cover. If you need kitchen extract cleaning at premises on Frinsted Road, Manor Road and Horn Hill or a nearby road, our technicians can take on the work. If your site is just outside Milstead, we cover Hollybushes (1 mile south-east), Bluetown (1 mile south-east), Frinsted (1 mile south-west), Wichling (2 miles south-east) and Doddington (2 miles south-east). Further out, we also cover Maidstone (9 miles west), Ashford (12 miles south-east), Canterbury (15 miles east), Sittingbourne (3 miles north), Whitstable (14 miles east) and Faversham (7 miles east).
Near you in Milstead
In Milstead, that means kitchens and buildings near Cromers Wood, among other places. The nearest railway station is Sittingbourne station, roughly 3.2 miles north of the centre. A little further out are Sittingbourne Heritage Museum (3 miles north) and Newnham Castle (3.2 miles east).
What we do, step by step
Protection comes first: sheeting goes over floors and surfaces close to the work. Then we make the system safe and start. The work on site takes as long as the system needs, from a few hours to several planned visits, and the area is cleaned down before we leave. Rural roads and tight entrances are worth telling us about before a visit to Milstead.
- You send photos or we visit, and the system is surveyed from canopy to discharge.
- Grease thickness is measured and the price is fixed before work starts.
- On the night, the equipment is off and cool and the kitchen is sheeted.
- We work through the system from the canopy to the fan and discharge.
- We re-test, photograph and send your certificate and photo report.
Preparing for the visit
- Find the previous report, if there is one
- Allow time for equipment near the work to be turned off and cool down
- Let us know how we reach the system, including roofs, risers and plant rooms
How to get a quote
We don’t publish a price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To get going, ring 0345 646 2711, or email photos.