Kent · Kitchen extract cleaning
Egerton Forstal kitchen extract cleaning
Need kitchen extract cleaning in Egerton Forstal? We survey first, give you a fixed quote and work around your opening hours, finishing with a written report and pictures.
- Ductwork thick with old, hardened grease
- A new tenancy or takeover with no cleaning history
- A kitchen with no current TR19 certificate
Why it’s worth doing now in Egerton Forstal
Every week without a clean adds another layer. Under BESA guidance, grease shouldn’t exceed a mean of 200 microns between cleans, and 500 microns or more at any point needs immediate spot cleaning. Heavy build-up takes longer to remove than regular cleans. Our emergency line runs 24/7, but a planned visit to Egerton Forstal is calmer for everyone.
What you pay reflects the actual work. That is why we survey first, from pictures or on site, and why the quote is fixed before we start.
Why choose Duct Doctor in Egerton Forstal
- Every visit written up, with photos
- CHAS and SafeContractor accredited, with ISO 9001
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- A fixed price before any work starts
Take a look at our cost guide or our accreditations.
Kitchen duct cleaning in Egerton Forstal
A kitchen extract system is far more than the canopy you can see. Beyond the filters run the plenum, the ducts and risers, the fan and the point where air leaves the building, and each part collects grease. A TR19® Grease clean deals with the whole route, not only the parts on show. Typical jobs include missing paperwork after a change of operator and an extract that no longer clears the smoke, across vertical risers, discharge points and horizontal duct runs. Kitchen extract cleaning, TR19 cleaning, extraction cleaning: whatever you call it, it’s the job we do every week across Kent.
A kitchen running fryers and chargrills all day builds up grease much faster than one that mostly steams and boils, so we look at the menu as well as the opening hours when we suggest the next date.
Work in a small place like Egerton Forstal starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.
We have been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we carry full insurance.
- Place
- Egerton Forstal (TN27)
- Region
- Kent
- Paperwork
- TR19® certificate and photo report
- Quotes
- A fixed price before work begins
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Do you need kitchen extract cleaning in Egerton Forstal?
Hours of cooking are the biggest factor. BESA guidance sets minimum cleaning intervals of every 3 months for 12 to 16 hours a day, 6 months for 6 to 12 hours, and 12 months for 2 to 6 hours. Those are minimums, and grease readings can show a kitchen needs cleaning sooner.
If you notice any of these, it’s worth a diagnosis:
- Ductwork thick with old, hardened grease
- An overdue clean flagged by an EHO or fire officer
- Stale cooking odours from the system
- Poor airflow at the canopy
If you look after a school kitchen, at a school such as Egerton Church of England Primary School or anywhere near Egerton Forstal, the holidays are the usual time for a TR19® clean.
Comparing quotes
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- What happens if part of the system can’t be accessed
- Whether the quote shows VAT
- Whether they recommend a next date
What kitchen extract cleaning cannot fix
An honest diagnosis matters more to us than a booking, so here’s what kitchen extract cleaning won’t do:
- Fire dampers that will not close (that needs damper testing and remedials)
- A fan motor that has burnt out
- Blocked drains from a neglected grease trap (a separate service)
If in doubt, ring 0345 646 2711 or drop us a line and we’ll say what we think.
What the work covers
- Canopies and hoods
- Vertical risers
- Discharge points
- Plenums and filters
- Horizontal duct runs
- Extract fans
Managing agents and facilities teams in Egerton Forstal
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.
We also work for facilities teams across offices, schools and healthcare in Egerton Forstal and across Kent. Larger estates can be phased building by building around the people who use them.
Part by part
Ductwork and risers
Vertical risers carry the air up through the building, and grease runs down their walls and pools at the base. They’re cleaned through access points along their height.
Extract fan and discharge
The discharge is where air leaves the building, which can collect grease and stain the surface around it. We clean it where it can be safely reached, and any limits are recorded.
Also near Egerton Forstal
What else we do in Egerton Forstal
What we do, step by step
Every visit runs to the same pattern: protect the area, isolate whatever needs isolating, carry out the kitchen extract cleaning, tidy up and leave you the report. The visit itself takes one visit for most kitchens, while large or complex systems may need more than one. Photos of the system and how to reach it help us plan a visit to Egerton Forstal.
- First comes a survey of the whole system, by pictures or a visit.
- Set points are tested for grease thickness and the quote is fixed before any work starts.
- Once the kitchen has closed and the equipment has cooled, we sheet and protect the area.
- The whole route is cleaned, from the canopy through the ductwork to the fan and the discharge.
- Readings and pictures are taken again, and you receive a TR19 certificate and photo report.
Preparing for the visit
- Make sure equipment near the work can be switched off and left to cool
- Let us know about permits to work or site inductions
- Mention any locked doors, roof access or ceiling voids
How to get a quote
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. Then we send a fixed price, before any work starts.
Related advice
Kitchen extract cleaning around Egerton Forstal
Egerton Forstal is about 41 miles from central London, well within the area we cover across London and the South East. Evening, overnight and weekend visits are all possible. Food hygiene inspections in Egerton Forstal are the job of Ashford council’s environmental health team. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A dated certificate in the maintenance file answers the question before it’s asked.
If you run a church or community hall kitchen, near Church of St James or elsewhere in Egerton Forstal, its extract still collects grease from every lunch and event.
Egerton Forstal is about 8 miles north-west of Ashford, in Kent. Every kind of commercial site in Egerton Forstal, we can take on kitchen extract cleaning. Visits can be booked for evenings, overnight or weekends so the site keeps running. We cover 922 places across Kent, large and small. There’s also a page for Maidstone, about 10 miles away.
We work across TN27 for kitchen extract cleaning and the streets around it. Local streets include Forstal Road, Forge Lane and Chantlers Meadow, all of which we cover for kitchen extract cleaning. Other places close to Egerton Forstal include Potter's Forstal (1 mile north-west), Newland Green (1 mile south-east), Pembles Cross (1 mile north), Mundy Bois (1 mile east) and Egerton (1 mile north-east). Further out, we also cover Maidstone (10 miles north-west), Ashford (8 miles south-east), Sittingbourne (11 miles north), Faversham (12 miles north-east), Kings Hill (14 miles north-west) and Davington (12 miles north-east).
What’s near Egerton Forstal
The nearest railway station is Pluckley station, about 2.6 miles south-east of the centre. Nearby you’ll also find Coldbridge Castle (1 mile north-west).
Aftercare tips
To keep the system working properly between visits:
- Switch the fan on before cooking starts
- Clean grease off the canopy surfaces regularly
- Clean the grease filters regularly between TR19 cleans
- Report grease drips, smells or fan noise right away
The kitchen is left clean and ready for the next service. Waste grease and water are contained and removed, so you can start cooking as normal.
Tell whoever looks after the system when something changes. Drips, odours and fan noise often mean grease is building, and a grease thickness test can confirm it.
FAQs for Egerton Forstal
Do you work overnight in Egerton Forstal?
Yes, out-of-hours work is a big part of what we do. Your customers, staff or residents in Egerton Forstal needn’t be disturbed. Your opening times are the first thing we ask for.
Do you cover smaller places like Egerton Forstal?
Yes, Egerton Forstal is part of our area, however small the site. A survey first, from pictures or a visit, means we arrive with the right kit.
Do I have to clean my extract to TR19 by law?
TR19 isn’t written into law, but the responsible person still has a legal duty under the Fire Safety Order 2005. Insurers, fire officers and EHOs look to TR19 as the standard, and many policies require it.
How often does a kitchen extract system need cleaning?
BESA guidance sets minimums by daily cooking hours: every 3 months for 12 to 16 hours, 6 months for 6 to 12 hours and 12 months for 2 to 6 hours. Measured grease levels set the real interval.
Do you have a 24/7 line?
Yes. There’s a 24/7 emergency line for anything that can’t wait until a planned visit. Call us any time and explain what’s happened.
Do you survey before quoting?
Yes. We always survey first, from your pictures and details, or with a visit where needed. A fixed quote follows.
What does a TR19 kitchen extract clean include?
We clean every part the grease travels through. Canopy, plenum, filters, ductwork, risers, fan and discharge are all included, reached through access panels where needed.
How long does it take to clean a kitchen extract system?
That depends on the size of the system, the amount of grease and the number of access points. Most jobs take anything from a few hours to a full night, depending on the size of the system.