Essex · Grease filter exchange
Grease Filter Exchange in Tillingham
Specialist grease filter exchange for Tillingham: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- A canopy that drips grease
- Filter washing that keeps being missed
- Hand-washed filters that still look greasy
Do you need grease filter exchange in Tillingham?
Long cooking hours in Tillingham or anywhere else mean more grease on the filters. A kitchen that cooks all day loads its filters quickly, so it needs more frequent changes.
These are the problems we see most often:
- Grease filters clogged with grease
- Smoke and heat lingering under the hood
- Grease collecting in the filter channels
- Damaged filters letting grease past
In and around Tillingham, every reachable section of the extract is cleaned, and anything we cannot reach goes on the report.
Comparing quotes
- Proof of insurance
- Whether the whole system is included, or only the parts that are easy to reach
- Whether the quote is based on a survey or pictures
- What hours they’ll be on site
Grease filter exchange in Tillingham, done properly
Washing filters in the kitchen sink is messy and easily missed on a busy week. With a filter exchange, we bring a clean set and take the dirty one away, so the canopy is never left without filters. Common call-outs are for damaged filters letting grease past and filters that come out of the sink still dirty, across island canopies, mesh filters and baffle filters.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, and those horizontal sections are where grease settles. We agree access and timings in advance.
Think of the report as the system’s health record: dated, with pictures, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.
- Where
- Tillingham (CM0)
- Region
- Essex
- Reporting
- Report and photos after the visit
- Price
- Fixed quote, usually within a working day
- Hours
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
For landlords and multi-site operators
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We can quote either party and send the paperwork to whoever needs it.
Keeping records across a portfolio is half the battle. Each visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.
What grease filter exchange cannot fix
We will not sell you work that does not address the problem, so these are the things it will not cover:
- A canopy that needs a proper clean
- Odours from the discharge that filters won’t stop
- A noisy or failed extract fan
If in doubt, call 0345 646 2711, or send details by email and we’ll say what we think.
What we work on in Tillingham
- Baffle filters
- Island canopies
- Wall canopies
- School and hospital kitchens
- Restaurants and pubs
- Mesh filters
Tillingham kitchens: local notes
At about 2 miles from the coast, Tillingham is close enough for sea air to matter. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. Essex County Fire and Rescue Service covers Tillingham. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. It’s Maldon council that sends environmental health officers to food businesses in Tillingham. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Keeping each certificate and photo report on file helps show the extract is looked after.
Church and community hall kitchens, near Church of St Nicholas or anywhere around Tillingham, are easy to forget, but their extracts collect grease like any other.
Tillingham is about 9 miles east of Maldon, in Essex. Whatever kind of site you run in Tillingham, we can take on grease filter exchange. We can work out of hours so the site keeps running. We cover 644 places across Essex, large and small. Chelmsford is in our area too, about 17 miles from Tillingham.
Work in CM0 follows the same survey, fixed quote and written report as everywhere else we cover. Streets in the area include Vicarage Lane, Mill Road and Marsh Road, and we cover them all for grease filter exchange. Other places close to Tillingham include Dengie (1 mile south), Asheldham (2 miles south-west), Southminster (3 miles south-west), Steeple (3 miles west) and Stoneyhills (5 miles south-west). Further out, we also cover Colchester (13 miles north), Clacton-on-Sea (14 miles north-east), Maldon (9 miles west), Rayleigh (14 miles south-west), Witham (13 miles north-west) and Rochford (11 miles south-west).
What’s near Tillingham
Locally, jobs take us to businesses close to The Cap And Feathers Public House. For rail, the closest station is Southminster station, about 3.1 miles south-west of the centre. Open spaces near Tillingham include Dengie SPA.
How we price grease filter exchange
We don’t publish a price list, because no two systems are the same. The quote depends on:
- Where the site is and how we reach it
- The condition of the system
- Site rules, permits and inductions
- How many systems or sites are involved
Putting the work off seldom saves money. Problems in a system tend to grow, which can make the next visit longer. If you are unsure, ring 0345 646 2711 or drop us a line and we’ll give you an honest view and a fixed quote.
Helping us quote
A few details help us quote accurately. When you get in touch, it helps to send:
- How we’d reach plant on a roof or in a plant room
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The paperwork from the last visit, if you have it
- Detail shots of panels, filters and grilles
Every quote begins with a look at the system, from your pictures and details or, where that is not enough, a survey on site. Then we send a fixed price so you know the cost before work begins.
Also near Tillingham
More services for Tillingham
Between visits
Think of this as the after-treatment advice, in brief:
- Book full TR19 cleans alongside filter changes
- Keep every filter in place during service
- Always run the extract while cooking
- Keep the canopy clear for exchange visits
If the plenum behind the filters looks greasy, we say so. That might mean bringing a TR19® clean forward and we can book that in.
Damaged filters leave gaps in the defence. Sorting them now keeps grease where it can be caught.
Common questions in Tillingham
Is Tillingham within the area you cover?
Yes, we work in villages as well as towns, and Tillingham is covered. Photos of the system and directions to the site help us plan the visit.
Can you work in Tillingham outside opening hours?
Yes, nights and weekends are routine for us. That way a site in Tillingham doesn’t have to lose a day’s trading. When you ring 0345 646 2711, or send details by email, mention when the site is quiet.
Can you clean our existing filters instead?
Yes, filters can be cleaned on a schedule as well as exchanged. We’ll explain the options when you get in touch.
Can you set up regular visits?
Yes, of course. Send details of the systems and how they’re used and we’ll propose a schedule with a fixed quote.
Which accreditations do you hold?
Our accreditations are CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
Where do the greasy filters go?
We take them away to be cleaned, so your staff don’t have to wash them. Clean filters go straight in.
Will we have to shut during the visit?
Not typically. We need the work area to ourselves while we are on site, so the visit goes in a quiet slot.
How long does the visit take?
We will confirm the time with your quote. In most cases, the work takes a short visit, depending on how many filters the canopies hold.
How it works
Protection comes first: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. The work on site takes less than an hour in most kitchens, and we clear up before we go. A few photos of the system help us make the most of a visit to a place like Tillingham.
- We start by noting how many filters you have and what type they are.
- Together we set how often the filters should be changed.
- Each visit starts with the used filters being removed.
- Clean, dry filters are fitted in their place, with no gaps left between them.
- If a filter is damaged or the plenum needs attention, we tell you.
Getting ready for the visit
- Tell us where we can park and unload
- Mention any sign-in, permit or induction we need
- Dig out any earlier paperwork for the system
How to get a quote
For a fixed quote, give us a ring on 0345 646 2711, or send details by email with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You will typically have a quote within one working day.
Read more
Part by part
Canopy filter housings
The trough or channel under the filters fills with grease. We point it out if it needs cleaning.
Baffle filters
Baffle filters use overlapping metal blades that force the air to change direction. Grease drops out as it does.