Hampshire · Fire damper testing
Fire damper testing in Wolverton, Hampshire
Fire damper drop testing and smoke damper testing, with a record for each damper for commercial sites in Wolverton and across Hampshire. CHAS, SafeContractor and ISO 9001, and fully insured.
- Corroded dampers in damp risers and plant rooms
- Fire dampers that fail to drop shut
- Fire dampers with no recent test record
Fire damper testing in Wolverton
Testing finds the dampers that won’t close. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper, so the fault doesn’t just sit on a list. We’re often asked to deal with dirty dampers that may not close and fire dampers with no recent test record, across offices and schools, motorised smoke dampers and wall and floor dampers.
Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, and the dampers in them are easily forgotten. The first visit starts by locating each damper.
Think of the report as the system’s health record: dated, with pictures, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.
- Location
- Wolverton (RG26)
- Region
- Hampshire
- Records
- Photo report after each visit
- Quotes
- A fixed price before we start
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Looking after it afterwards
To keep the system working properly between visits:
- Add new dampers to the register as they’re fitted
- Book the next test before the year runs out
- Keep cables and fixings away from damper blades
- Fix water leaks in plant rooms and risers promptly
Failed dampers are set out separately, each with the fault we found, along with an offer to repair or replace them. Once the work is done, the damper is tested again and the record updated.
Make sure every damper can be reached. If a damper has no access panel, have one fitted ahead of the next visit.
Wolverton: your questions answered
Who is the fire and rescue service for Wolverton?
Hampshire and Isle of Wight Fire and Rescue Service is the fire and rescue service for Wolverton. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Can you come to Wolverton after we close?
Yes, nights and weekends are routine for us. That way a site in Wolverton doesn’t have to lose a day’s trading. When you give us a ring on 0345 646 2711 or drop us a line, mention when the site is quiet.
What’s TR19?
TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
How often should fire dampers be tested?
The guidance from BESA is at least annually, by a competent person. Dampers should also be tested when they’re first installed.
Do you certify fire dampers?
Our paperwork is a test report, not a certificate of compliance. For each damper it shows the result and anything that needs putting right.
Is TR19 cleaning required by law?
No, not in itself. TR19® is the benchmark insurers, fire officers and EHOs check against, and many insurance policies ask for proof of TR19® cleaning. The law behind it is the Fire Safety Order 2005, which applies in England and Wales.
What do you do to protect the area?
With sheeting and covers, before anything else happens. The work is kept contained and clean down when we finish.
Who has the legal duty for fire safety?
That depends on who controls the premises. The Fire Safety Order 2005 puts the duty on the responsible person, which can be the employer, the owner, a landlord, an FM or a managing agent.
Multi-site and managed buildings
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements, and we will send a fixed quote.
Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept on a regular cycle.
The process
There are three stages on the day: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, while signing off means the written report and photos. The middle part takes longest, and that takes a morning or an afternoon for a small number of dampers, longer where there are many. If you can send photos, we can arrive in Wolverton knowing what to expect.
- First we check the schedule and the last set of results.
- We locate every damper and note any we can’t reach.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Dampers that pass are reset, and failures are logged with what we found.
- We report the results and offer remedials on failed dampers.
How to prepare
- Dig out any earlier paperwork for the system
- Let us know about parking and loading
- Allow time for equipment near the work to be turned off and cool down
How to get a quote
Need a price for fire damper testing? Please phone us on 0345 646 2711 or email us with a few details about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
Advice
What happens if it’s left?
After any fire, one of the first questions is what maintenance had been done. A damper test log helps show the responsible person kept on top of things, and you can only produce records for tests that took place. Somewhere as small as Wolverton, losing a kitchen or building to a fault is felt by everyone who uses it.
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we will explain each part.
Why Wolverton businesses choose us
- Fixed quotes from a survey or photos
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- CHAS and SafeContractor accredited, with ISO 9001
- A single point of contact for sites across the South East and London
Staff cleaning versus specialist work
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Logging matters as much as cleaning. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, next to our reports.
Fire damper testing around Wolverton
Wolverton is about 49 miles from central London, well within the area we cover across London and the South East. Evening, overnight and weekend visits are all possible. Wolverton sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
Every damper we test around Wolverton gets its own entry in the report, with photos.
Wolverton is about 3 miles south-west of Tadley, in Hampshire. We provide fire damper testing for businesses, landlords and public buildings in Wolverton and the rest of Hampshire. Across Hampshire, we cover 683 places, Wolverton among them. Our Reading page covers sites nearby (13 miles or so).
Here we cover the RG26 postcode area for fire damper testing. If your site is just outside Wolverton, we cover Fair Oak (1 mile north), Kingsclere (2 miles west), Ashford Hill (2 miles north), Plastow Green (2 miles north-west) and Goose Hill (3 miles north). We also work in nearby towns such as Basingstoke (6 miles south-east), Andover (14 miles south-west), Tadley (3 miles north-east), Hook (11 miles east), Popley (6 miles south-east) and Kempshott (6 miles south-east).
Around Wolverton
In Wolverton, that means kitchens and buildings near The George And Dragon Public House, among other places. For rail, the closest station is Thatcham station, about 5 miles north of the centre. A little further out are Park Prewett Hospital (4.9 miles south-east). For a walk, there’s Ladle Hill.
What we’re called out for in Wolverton
Buildings in Wolverton change owners, tenants and maintenance contractors over the years, and the damper records don’t always go with them. Without a register, nobody knows how many dampers there are or when they were last tested.
Clients typically contact us when they notice one of these:
- Rusted damper blades and springs
- Smoke dampers that need testing through their controls
- Dampers that stick or won’t close fully
- Dampers clogged with dust or grease
Hospitals such as Park Prewett Hospital, about 4.9 miles south-east, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Wolverton, the same annual testing applies.
Comparing quotes
- Whether inaccessible sections are listed on the report
- What hours they’ll be on site
- How VAT is shown on the quote
- Whether they’re fully insured
Nearby places to Wolverton
Also in Wolverton
What a clean will not put right
Before you book, it helps to know what’s not included:
- Faults in the alarm or building controls that signal smoke dampers
- Designing the building’s fire compartments
- Dampers that were never installed where they’re needed
Not sure which it is? You can call 0345 646 2711, or email photos and we’ll tell you honestly.
Parts of the system we cover
- Fusible link fire dampers
- Offices and schools
- Riser dampers
- Hospitals and care homes
- Wall and floor dampers
- Motorised smoke dampers