Essex · Fire damper testing
Fire damper inspection in Wix Green
For fire damper testing in Wix Green, one call is all it takes: survey, fixed quote, work and sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Dust or grease build-up on damper blades
- Smoke dampers with no recent test
- Buildings with no damper register
Fire damper testing in Wix Green
Not every damper relies on heat. A smoke damper is driven by a motor and responds to signals from its controls, so testing means running them through their controls and checking that each blade moves fully and returns. Common call-outs are for dirty dampers that may not close and fire dampers that haven’t been tested for over a year, across motorised smoke dampers, wall and floor dampers and hospitals and care homes.
Testing in a small place like Wix Green is planned around the journey and access, and the test itself is the same as in any city building.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Place
- Wix Green (CO11)
- Wider area
- Essex
- Records
- Photo report after every visit
- Quotes
- A fixed quote up front
- Hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Leave it or put it right?
Faults found early are often simpler to put right. Left for years, corrosion and build-up can turn it into a full damper replacement. Equipment tucked in a roof space or outbuilding near Wix Green rarely gets looked at unless someone books it.
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we will go through it with you.
What you get with us
- One contact for all your sites in London and the South East
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Evenings, overnight and weekends, plus 24/7 emergency callout
- Every job surveyed first
Take a look at how cleaning jobs are priced or our accreditations.
Wix Green: your questions answered
Which fire and rescue service is responsible for Wix Green?
It’s Essex County Fire and Rescue Service, which covers Wix Green. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
Do you work in villages like Wix Green?
Yes. Wix Green is within the area we cover across London and the South East. Just mention lanes, gates or anything else about the site when you book.
What accreditations do you have?
We hold CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
Where does the waste go?
We contain it and take it with us. Grease, debris and waste water are collected as the work goes on, so it doesn’t spread.
What do you need from me for a quote?
A short description and a few pictures, with the address and opening hours. We will ask for anything else we need.
Do you survey before quoting?
Yes. Photos often do the job, while bigger or harder-to-see systems are surveyed on site.
Will we get a certificate for the dampers?
The record we give you is a report of the tests for every damper on the visit. Failures are set out with the remedials we’d suggest.
How much notice should we give?
Book as early as you can for planned work, especially if the next clean or test is due soon. For emergencies, we take calls 24/7.
Landlords, agents and facilities managers
Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept on a regular cycle.
Keeping records across a portfolio is half the battle. Each visit produces a dated report with pictures, so you can show an insurer or inspector what was done at each site.
Towns and villages near Wix Green
More services for Wix Green
Wix Green buildings and fire safety
At about 3 miles from the coast, Wix Green is close enough for sea air to matter. Near the sea, we look closely for rust on dampers serving intakes and louvres. The FSA’s food hygiene register lists about 4 schools, colleges and universities with registered kitchens or food service across Wix Green and its immediate surroundings (about a mile and a half). Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. Fire safety in Wix Green falls to Essex County Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
School buildings such as Wix and Wrabness Primary School are usually tested in the holidays, wherever they have dampers.
Wix Green is about 5 miles west of Harwich, in Essex. Whether your site is in the middle of Wix Green or further out, fire damper testing is available to all kinds of commercial premises, from small sites to large estates. Wix Green is one of 644 places in Essex we cover for fire damper testing. For sites nearby, see our Chelmsford page (31 miles or so).
Here we cover the CO11 postcode area for fire damper testing. Streets in the area include Oakley Road and Harwich Road, all of which we cover for fire damper testing. Neighbouring places we cover for fire damper testing include Wix (1 mile west), Great Oakley (1 mile south-east), Wrabness (2 miles north), Bradfield (2 miles north-west) and Bradfield Heath (2 miles north-west). We also work in nearby towns such as Colchester (11 miles west), Clacton-on-Sea (8 miles south), Harwich (5 miles east), Camulodunum (12 miles west), Greenstead (9 miles west) and Wivenhoe (9 miles south-west).
Local landmarks in Wix Green
We work in commercial kitchens and buildings around The White Hart Inn and the streets around them. The nearest railway station is Wrabness station, roughly 2 miles north of the centre. Not far away are Oakfield Wood and Alton Water.
Keeping the system healthy
Looking after the system between visits is straightforward, and it makes the next visit easier:
- Report leaks or condensation near ductwork quickly
- Keep ceiling hatches and duct panels easy to open
- Act on failed dampers rather than leaving them on file
- Store test records alongside the fire risk assessment
Pass the report to whoever keeps your fire risk assessment up to date so their assessment matches what was found. Outstanding faults should be dealt with, not left on file.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
When to call us in Wix Green
Dust settles on damper blades, runners and springs over the years. If the duct carries cooking vapour, a film of grease adds to it, and either can stop the blade dropping fully.
The symptoms we are asked about most include:
- Dust or grease build-up on damper blades
- Dampers flagged on a fire risk assessment
- Gaps in the fire damper test log
- Motorised smoke dampers due for testing
If you manage a historic building in the area (Thorpe Hall is about 4.2 miles south), dampers fitted during conversions can be hard to reach and need recording.
What your quote should include
- Whether they recommend a next date
- Whether a survey comes first
- Whether the work can be done while the site is closed
- Proof of insurance
When something else is needed
Fire damper testing can’t fix everything, and we’ll tell you before any work starts. It won’t put right:
- Approving the building’s fire strategy
- Gaps in the wall or floor around the damper
- Ductwork crossing a fire wall with no damper fitted
If you’re not sure, just call us on 0345 646 2711, or email photos and we will give you a straight answer.
Parts of the system we cover
- Offices and schools
- Riser dampers
- Wall and floor dampers
- Fusible link fire dampers
- Hospitals and care homes
- Motorised smoke dampers
How it works
When we arrive, we check the system against the survey or the pictures you sent. Anything unexpected is raised with you before we go further. From there, it takes a couple of hours for a few dampers, and a day or more across a big site. Somewhere as small as Wix Green, the date and timings are agreed with you well before the day.
- We plan access and timing with you first, including any out-of-hours work.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
Before we arrive
- Let us know how we reach the system, including roofs, risers and plant rooms
- Let us know when the site is closed or quiet
- Plan for cooking equipment or plant to be off before we arrive
Getting a quote
Some systems can be priced from pictures; others need a survey. Big or complicated sites, and systems that are hard to see in pictures, get a survey first. Either way, the quote is fixed before any work is booked.
Related advice
Part by part
Fusible link fire dampers
The common fire damper uses a link that holds the blade open. Heat melts the link and the blade falls shut across the duct. We release the blade, check it closes fully and reset it.
Ceiling voids and risers
Plant rooms and risers can be damp, which leads to corrosion. We note any rust or water damage on the report so it can be dealt with.