Hampshire · Fire damper testing
Wadwick fire damper testing
Fire damper testing for Wadwick, with a survey first and a report with pictures at the end. Call for a fixed quote.
- Dust or grease build-up on damper blades
- Dampers flagged on a fire risk assessment
- Fire dampers with no recent test record
Fire damper testing in Wadwick
Wherever a duct crosses a fire-resisting wall or floor, there should be a fire damper inside it. A fusible link holds the blade open until heat melts it, and the blade then drops to shut the duct. A drop test shows that the damper still does that when it matters, and we record the result for every damper we test. The work covers riser dampers, fusible link fire dampers and offices and schools, and people most often call us about rusted damper blades and springs and dampers that stick or won’t close fully.
Somewhere as small as Wadwick, fire dampers are normally found in a school, a care home, a hotel or a converted building, wherever there is one. Each damper still needs testing at least once a year.
The sign-off is always in writing: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Location
- Wadwick (SP11)
- Wider area
- Hampshire
- Paperwork
- Written report with pictures
- Quotes
- A fixed quote up front
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Updated
- 30 October 2026
What staff can safely do
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
Fixed quotes for fire damper testing in Wadwick
Your quote is based on your site. We consider:
- Any permits to work or inductions
- Whether we need access equipment or extra panels
- The times the site is available
- The scale of the work
One small site or a whole estate, the quote is built the same way: the work involved, the access and the timing. You’ll have a fixed price before we start.
What we need to know
To help us quote quickly, please include:
- Any previous report or certificate
- When the site is open and when it’s quiet
- The postcode and the type of business
- A few general shots of the system
Quoting starts with a diagnosis, from your pictures and details or, where that isn’t enough, a survey on site. Then we send a fixed price so you know the cost before any work starts.
Managing agents and facilities teams in Wadwick
Whether it’s one building or many, you get the same standard: a survey first, a fixed quote, the work timed around the site and a report with photos.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
What fire damper testing looks like in Wadwick
About 58 miles out from central London, Wadwick is part of the South East area we work across. Evening, overnight and weekend visits are all possible. Wadwick is covered by Hampshire and Isle of Wight Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
Highclere Castle, about 3.8 miles north, is one of the historic houses near Wadwick, and older buildings converted to new uses often have ventilation added later.
Wadwick is about 6 miles north-east of Andover, in Hampshire. Wherever you are in the SP11 postcode area, we can take on fire damper testing. Across Hampshire, we cover 683 places, and Wadwick is one of them. There’s also a page for Reading, roughly 21 miles from Wadwick.
We work across SP11 for fire damper testing and the roads nearby. We also cover the places around Wadwick: Binley (1 mile west), St Mary Bourne (2 miles south-west), Cole Henley (3 miles south-east), Whitchurch (4 miles south-east) and Wells-in-the-Field (4 miles south-east). Within a short drive, we also cover Basingstoke (12 miles east), Winchester (15 miles south), Andover (6 miles south-west), Tadley (12 miles north-east), Hyde (14 miles south) and Popley (13 miles east).
Local landmarks in Wadwick
The nearest railway station is Whitchurch (Hampshire) station, roughly 3.2 miles south-east. Not far away are Sidown Hill.
Why it’s worth doing now in Wadwick
Fire risk assessors and insurers may ask to see damper test records. Having a current report ready for a building in Wadwick saves a scramble when someone asks. It’s worth booking a check, because nobody sees inside a duct day to day.
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
Why book with us
- Evenings, overnight and weekends, plus 24/7 emergency callout
- Full insurance on every job
- One number for every site across the South East and London
- Every visit written up, with photos
See our cost guide and our accreditations.
Common questions in Wadwick
Do you work at weekends in Wadwick?
Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. Tell us your opening hours when you ask for a quote.
Can you get to a site in Wadwick?
Yes, smaller places are covered as well as towns. Let us know about access, parking and anything unusual about getting there when you book.
Do you look at the system first?
Yes. We always survey first, from your pictures and details, or with a visit where necessary. Then you get a fixed quote.
What if parts of the system cannot be reached?
Anything we can’t reach goes on the report, with a note of where it is, and we tell you what would make it reachable, for example new access panels.
Do you offer maintenance contracts?
Yes. Plans on a 3, 6 or 12-monthly cycle are available, depending on what the system needs.
Who is the responsible person?
It depends on the building. The Fire Safety Order 2005 puts the duty on the responsible person, which may be the employer, owner, landlord, facilities manager or managing agent.
What accreditations do you have?
We hold CHAS, SafeContractor and ISO 9001, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
Where does the waste go?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. We don’t leave it behind.
Keeping the system healthy
Results last longer with the right care. Here’s what we suggest:
- Book the next test before the year runs out
- Act on failed dampers rather than leaving them on file
- Fix water leaks in plant rooms and risers promptly
- Make sure access panels stay clear and usable
Share the results with your fire risk assessor, so the assessment reflects where the dampers stand. Faults on the report are worth closing off quickly.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
What happens on the day
A visit follows the same order every time: sheeting and protection first, make the system safe, carry out the fire damper testing, clear away and hand over the paperwork. The visit itself takes a couple of hours for a few dampers, and a day or more across a big site. A quick note on how to find the site and where to park makes a visit to Wadwick run smoothly.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- Dampers are located one by one and reached through their access panels.
- We release each fire damper blade and operate smoke dampers from their controls.
- We reset every damper that passes and check it’s left open.
- You get a report listing each damper, its result and any remedials needed.
Before we arrive
- Move anything stored near the system
- Mention any locked doors, roof access or ceiling voids
- Let us know about permits to work or site inductions
Getting a quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Read more
Also near Wadwick
Also in Wadwick
What we are called out for in Wadwick
Dampers are hidden above ceilings, inside risers and behind boxing. If there’s no hatch to reach them, they slip off everyone’s list, and one that can’t be reached can’t be tested.
Look out for these warning signs:
- Fire dampers that fail to drop shut
- Fire dampers with no recent test record
- Smoke dampers with no recent test
- Dampers hidden with no access panel or hatch
Around Wadwick, as anywhere, each damper is released, checked, reset and recorded.
Questions to ask before you book
- Whether the quote is based on a survey or pictures
- What happens if part of the system cannot be accessed
- Whether they recommend a next date
- Whether the work can be done while the site is closed