Hampshire · Fire damper testing
Fire damper testing in Upper Wield, Hampshire
Fire damper testing for Upper Wield, with a survey first and a report with pictures at the end. Ask us for a fixed quote.
- Corroded dampers in damp risers and plant rooms
- Blades that jam part-way when released
- Dirty dampers that may not close
Fire damper testing in Upper Wield, done properly
The point of testing is to find dampers that fail. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper, so the fault doesn’t just sit on a list. If you are dealing with dampers that stick or won’t close fully and dampers affected by leaks or condensation, we can put it right, from motorised smoke dampers, offices and schools and hospitals and care homes onwards.
For a building in or near Upper Wield, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
Nothing is signed off by word of mouth: a written report, dated and illustrated with photos, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Location
- Upper Wield (SO24)
- Wider area
- Hampshire
- Paperwork
- Photo report after each visit
- Price
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Common problems we fix in Upper Wield
Over time, dust builds up on the blade, the runners and the spring. Where the duct carries grease or cooking vapour, grease coats them too, and either can stop the blade dropping fully.
What we are most often called out for:
- Dampers hidden with no access panel or hatch
- Motorised smoke dampers due for testing
- Dirty dampers that may not close
- Rusted damper blades and springs
Alton Community Hospital, about 4.8 miles east of Upper Wield, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
What your quote should include
- What paperwork you get at the end
- Whether the quote shows VAT
- Whether the figure could change on the day
- Proof of insurance
What happens on the day
We start by comparing what we find with the survey or your pictures. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. Photos of the system and how to reach it help us plan a visit to Upper Wield.
- First we check the schedule and the last set of results.
- Each damper is found and checked for access.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Dampers that pass are reset, and failures are logged with what we found.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Preparing for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Let us know about permits to work or site inductions
- Clear loose items from the work area
Ask for a quote
Quoting starts with a diagnosis, from your pictures and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work, before we start.
Advice
Looking after it afterwards
So the system stays in good health:
- Fix water leaks in plant rooms and risers promptly
- Get remedials done soon after a failed test
- Keep damper test reports with the fire safety log
- Diary the annual test well ahead
When we finish, we send a report covering every damper on the visit, with where it is and whether it passed. Keep it with the building’s fire safety records so it’s to hand for assessors and insurers.
Where a damper sits in ductwork that collects dust or grease, keeping that ductwork clean helps. Duct cleaning and damper testing can be planned side by side.
How we price fire damper testing
Before we fix a price, we need to know a few things. We look at:
- The times the site is available
- The size of the system
- What state the system is in
- Site requirements such as sign-in and permits
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll go through it with you.
What to send for a quote
To help us quote quickly, please include:
- The postcode and the type of business
- The roof, plant room or outside wall the system runs to
- Problems your staff have spotted
- Any previous report or certificate
Some systems can be priced from photos; others need a survey. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before we start.
Part by part
Offices and retail
Multi-let buildings may have dampers inside tenant areas. We agree access with the managing agent before the visit.
Ceiling voids and risers
Plant rooms and risers can be damp, which leads to corrosion. Signs of corrosion or water are recorded so the cause can be tackled.
What fire damper testing looks like in Upper Wield
Upper Wield is covered by Hampshire and Isle of Wight Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up. For Upper Wield, the closest hospital is Alton Community Hospital, roughly 4.8 miles east. Where patients or residents may need help to leave a building, working dampers matter all the more.
Hall Place, about 2.2 miles east, is one of the historic houses near Upper Wield, and older buildings converted to new uses often have ventilation added later.
Upper Wield is about 5 miles west of Alton, in Hampshire. Anywhere in SO24, we can take on fire damper testing. Across Hampshire, we cover 683 places, Upper Wield among them. Our Southampton page covers sites nearby, about 20 miles away.
Every address in SO24 is covered for fire damper testing, from the main roads to the quietest streets. We also cover the places around Upper Wield: Preston Candover (2 miles north-west), Bighton (3 miles south-west), Brown Candover (3 miles west), Totford (4 miles west) and Old Alresford (4 miles south-west). Larger places within reach include Basingstoke (8 miles north), Winchester (11 miles south-west), Fleet (14 miles north-east), Alton (5 miles east), Petersfield (12 miles south-east) and Tadley (15 miles north).
Local landmarks in Upper Wield
Typical jobs here are in premises near The Yew Tree pub. Well-known places in the area include Barton Castle (0.7 miles south-west) and Alton Community Hospital (4.8 miles east). For a walk, there’s King's Hill.
Places near Upper Wield
What else we do in Upper Wield
Common questions in Upper Wield
Do you work in villages like Upper Wield?
Yes, Upper Wield is part of our area, however small the site. Just mention lanes, gates or anything else about the site when you book.
Which fire and rescue service is responsible for Upper Wield?
Upper Wield is in the area of Hampshire and Isle of Wight Fire and Rescue Service. If a fire safety officer audits the building, they may ask for the latest damper test records.
Can you fix fire dampers that fail?
Failed dampers are reported and we can quote to repair or replace them. After the repair, we test it again so the record shows a pass.
Is TR19 cleaning required by law?
No. TR19® itself is not law; it’s a BESA specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and cleaning to TR19® is the recognised way to show grease is under control.
What accreditations do you have?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’re fully insured and have been trading since 2009.
What happens to dampers you can’t get to?
The report lists each inaccessible damper and where it is, so you know exactly what’s outstanding. Fitting an access panel is the usual fix, and we can quote for it.
Can one contract cover all our sites?
Yes. You deal with one contact for every site across London and the South East, with visits on a regular schedule.
Can you test motorised smoke dampers?
Yes. We test smoke dampers through their control system, as they’re motor driven. We check every blade moves fully and record the outcome.
Honest limits
It’s worth knowing the limits before booking:
- Signing off a building’s overall fire safety
- Missing dampers that a designer needs to specify
- Gaps in the wall or floor around the damper
If in doubt, call 0345 646 2711, or send details by email and we will say what we think.
What the work covers
- Fusible link fire dampers
- Wall and floor dampers
- Riser dampers
- Motorised smoke dampers
- Offices and schools
- Hospitals and care homes
For landlords and multi-site operators
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.
If you look after several sites, we can schedule visits across all of them on one quote. Every building has its own written report, so each one has its own record.