Windsor and Maidenhead · Fire damper testing

Touchen-end fire damper testing

Fire damper testing for Touchen-end, with a survey first and a report with photos at the end. Ask us for a fixed quote.

  • Dust or grease build-up on damper blades
  • Dampers flagged on a fire risk assessment
  • Smoke dampers that need testing through their controls

Fire damper testing across Touchen-end

Touchen-end buildings and fire safety

There are about 4 schools, colleges and universities on the FSA’s food hygiene register in and around Touchen-end, up to about a mile and a half out. If any of them has ducted ventilation, its dampers need an annual drop test at least. Touchen-end sits within the area of Royal Berkshire Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises. St Mark's Hospital is the nearest hospital, about 2.9 miles north of Touchen-end. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital.

St Mark's Hospital, about 2.9 miles north of Touchen-end, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests. School buildings such as Holyport College are normally tested in the holidays, wherever they have dampers.

Touchen-end is about 3 miles south of Maidenhead, in Windsor and Maidenhead. Anywhere in SL6, we cover fire damper testing for commercial sites. Touchen-end is one of 57 towns, villages and districts in Windsor and Maidenhead where we work for commercial clients. Reading is in our area too, about 11 miles from Touchen-end.

Here we cover the SL6 postcode area for fire damper testing. Other places close to Touchen-end include Stud Green (1 mile north), Moneyrow Green (1 mile north-east), Holyport (1 mile north-east), Paley Street (1 mile west) and Braywoodside (1 mile south-west). We also work in nearby towns such as Maidenhead (3 miles north), Windsor (4 miles east), North Ascot (5 miles south), Cookham (5 miles north), Furze Platt (4 miles north) and Dedworth (3 miles east).

Around Touchen-end

Typical jobs here are in premises near Jolly Gardener pub, Ockwells Park and Holyport CofE Primary School and the streets around them. Touchen-end’s nearest station is Maidenhead station, about 2.4 miles north. Nearby you will also find The Reitlinger Bequest Museum (2.9 miles north) and St Mark's Hospital (2.9 miles north). For a walk, there’s Bray Pit and Weycock Hill.

Map of Touchen-end © OpenStreetMap contributors

Fire damper testing for kitchens and businesses in Touchen-end

Some dampers haven’t been tested since the day they went in. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We find what we can, test what we can reach and list anything we cannot get to, so you can see exactly what still needs access. The work covers motorised smoke dampers, hospitals and care homes and fusible link fire dampers, and people most often call us about damper actions from a fire risk assessment and fire dampers with no recent test record.

Testing in a small place like Touchen-end is planned around the journey and access, and the test itself is the same as in any city building.

The paperwork matters as much as the work. Each visit is written up with photos, covering the work done, any areas we couldn’t access and a recommended next date. Keep it with your fire safety records so it’s to hand when an insurer or inspector asks.

Location
Touchen-end (SL6)
Wider area
Windsor and Maidenhead
Paperwork
Photo report after each visit
Quotes
Fixed quote, typically within a working day
Working hours
When your site is closed, plus a 24/7 line
Telephone
0345 646 2711
Reviewed
30 October 2026
Inside an extract duct: heavy deposits on the left, cleaned metal on the right

How we price fire damper testing

The survey tells us what the work involves. The main factors are:

  • How many systems or sites are involved
  • Site rules, permits and inductions
  • The condition we find in the survey
  • Where the site is and how we reach it

What you pay depends on how big the system is, the condition it’s in and how easy it is to reach. You get a fixed price before we start, so you know where you stand.

Asking for a quote

The more you tell us, the more accurate the quote. When you get in touch, it helps to send:

  • Your last certificate, test record or report
  • Any access panels or hatches you can see
  • Any symptoms, from odd noises to smells or leaks
  • A few general shots of the system

Need a price for fire damper testing? Please call 0345 646 2711, or send details by email and tell us about the site. We’ll talk you through the work and send you a fixed quote before anything is booked.

Do you need fire damper testing in Touchen-end?

Corrosion is another common cause of failure. Condensation, leaks and damp plant rooms corrode the parts that need to move, so a damper can seize without anyone noticing.

Look out for any of the following:

  • Smoke dampers that need testing through their controls
  • Buildings with no damper register
  • Dampers hidden with no access panel or hatch
  • Dampers overdue for their annual drop test

Historic houses near Touchen-end, with Dorney Court about 2.9 miles north-east, are a reminder that older buildings can hold dampers in unexpected places.

Comparing quotes

  • Whether a survey comes first
  • Whether the quote shows VAT
  • Proof of accreditation you can verify
  • Whether they recommend a next date

Our hiring checklist

When something else is needed

Fire damper testing cannot fix everything, and we’d rather say so up front. It won’t put right:

  • Missing dampers that a designer needs to specify
  • Designing the building’s fire compartments
  • Fire alarm or control system faults behind a smoke damper

Not sure which it is? You can call us on 0345 646 2711 or drop us a line and we will tell you honestly before you book.

What the work covers

  • Wall and floor dampers
  • Riser dampers
  • Fusible link fire dampers
  • Motorised smoke dampers
  • Offices and schools
  • Hospitals and care homes

What staff can safely do

Staff cleaning and specialist work are not the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but they do not reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.

If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We’ll take a look and send you a fixed quote.

Landlords, agents and facilities managers

Whether it’s one building or many, you get the same standard: diagnosis, a fixed price, work booked around your hours and a written report with photos.

Keeping records across a portfolio is half the battle. Every visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.

What happens if it’s left?

Your fire risk assessor or insurer may want evidence that dampers have been tested. A current report on file means you can answer straight away when someone asks. Somewhere as small as Touchen-end, losing a kitchen or building to a fault is felt by everyone who uses it.

You won’t find a price list here, because the cost depends on the site in front of us. For a fixed quote, call 0345 646 2711 or drop us a line, and we’ll explain what it covers.

Why book with us

  • Fixed quotes, usually within one working day
  • Trading since 2009
  • A single point of contact for sites across the South East and London
  • Full insurance on every job

See our cost guide and how to check a contractor.

The process

We turn up at the time agreed with you, which is often after service, overnight or at a weekend. Equipment that has to be off is switched off and allowed to cool first, and the area around the work is covered and protected. On site, it takes a couple of hours for a few dampers, and a day or more across a big site. Somewhere as small as Touchen-end, the date and timings are agreed with you well before the day.

  1. First we look at any damper register, drawings or earlier test reports.
  2. We find every damper and open it up through the access panel.
  3. We release each fire damper blade and operate smoke dampers from their controls.
  4. We reset every damper that passes and check it’s left open.
  5. The results go into a report, with failed dampers and remedials listed.

Preparing for the visit

  • Tell us the best time to work, such as after service or at a weekend
  • Mention any sign-in, permit or induction we need
  • Clear the space around the work

How to get a quote

Getting a quote does not take long. Send a few details and pictures, and we usually reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.

Get a quick quote

Read more

Touchen-end: your questions answered

Do you work overnight in Touchen-end?

Yes, out-of-hours work is a big part of what we do. That way a site in Touchen-end does not have to lose a day’s trading. Tell us your opening hours when you ask for a quote.

Who is the fire and rescue service for Touchen-end?

Touchen-end is in the area of Royal Berkshire Fire and Rescue Service. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.

Who is responsible for fire damper testing?

The duty falls on the responsible person for the premises. That is often the employer, owner, landlord, facilities manager or managing agent. Our part is the testing and the records that show it’s been done.

How long will damper testing take?

Expect it to take from an hour or two in a small building to several visits on a large estate. Access is the biggest factor, so we’ll confirm the time when we quote.

Do you look at the system first?

Yes. For many sites, pictures and a few details are enough, and larger or hidden systems get a visit.

What if a damper has no access panel?

We do not leave it off the report; we note it as not reached. Once there’s a panel or a way through the ceiling, it can be tested.

What is TR19?

BESA’s ventilation hygiene specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not legislation, but it’s the standard people check against.

Can one contract cover all our sites?

Yes. You deal with one contact for every site in our area, with visits on a regular schedule.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London