Bracknell Forest · Fire damper testing
Fire and smoke damper testing in Tickleback Row
For fire damper testing in Tickleback Row, one call is all it takes: survey, fixed quote, work and sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Smoke dampers with no recent test
- Gaps in the fire damper test log
- Dirty dampers that may not close
About our fire damper testing in Tickleback Row
Not every damper relies on heat. A smoke damper is driven by a motor and responds to signals from its controls, so we test them by operating them through those controls and checking that each blade moves fully and returns. The work covers offices and schools, fusible link fire dampers and motorised smoke dampers, and people most often call us about buildings with no damper register and fire dampers that haven’t been tested for over a year.
Testing in a small place like Tickleback Row is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
For insurers and inspectors, the record counts. That’s why every job is written up in a report with photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Where
- Tickleback Row (RG42)
- Region
- Bracknell Forest
- Paperwork
- Photo report after every visit
- Quotes
- A fixed price before we start
- Hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
Managing agents and facilities teams in Tickleback Row
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we will send a fixed quote.
Why act early in Tickleback Row
Fire risk assessors and insurers may ask to see damper test records. A current report on file means you can answer straight away when someone asks. Planning a trip to Tickleback Row ahead is easier for everyone than a rushed one.
Every site is different, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all make a difference.
Why choose Duct Doctor in Tickleback Row
- A written report with pictures after every visit
- CHAS, SafeContractor and ISO 9001
- Every job surveyed first
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
Take a look at our cost guide and how to check a contractor.
Fire damper testing around Tickleback Row
Royal Berkshire Fire and Rescue Service covers Tickleback Row. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order. Tickleback Row, about 29 miles from central London, is within our usual area. A survey and a fixed quote come first, then the visit at a time that suits you.
For schools like Garth Hill College, damper testing is easiest in the holidays, when corridors and ceilings are clear. If you manage a care home or clinic near Tickleback Row, the testing that a hospital like Heatherwood Hospital (about 3.9 miles south-east) relies on applies to your dampers too.
Tickleback Row is about 3 miles north of Bracknell, in Bracknell Forest. Whatever kind of site you run in Tickleback Row, we can take on fire damper testing. We can work out of hours so trading is not interrupted. Across Bracknell Forest, we cover 41 places, Tickleback Row among them. There’s also a page for Reading, about 10 miles away.
We cover every part of the RG42 postcode area for fire damper testing and the roads nearby. We also cover the places around Tickleback Row: Moss End (1 mile east), Jealott's Hill (1 mile north), Warfield (1 mile east), Hawthorn Hill (1 mile north-east) and Newell Green (1 mile south). Larger places within reach include Bracknell (3 miles south), Sandhurst (7 miles south), Great Hollands (3 miles south), Forest Park (3 miles south), The Warren (3 miles south-east) and Harmans Water (3 miles south).
Landmarks near Tickleback Row
The closest station to Tickleback Row is Bracknell station, about 2.3 miles south. A little further out are The Lexicon (2.1 miles south) and Heatherwood Hospital (3.9 miles south-east). The countryside around Tickleback Row includes Holt Copse & Joel Park and Weycock Hill.
FAQs for Tickleback Row
Do you cover smaller places like Tickleback Row?
Yes. Tickleback Row is within the area we cover across London and the South East. Just mention lanes, gates or anything else about the site when you book.
Which fire authority looks after Tickleback Row?
Royal Berkshire Fire and Rescue Service is the fire and rescue service for Tickleback Row. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Do you have a 24/7 line?
Yes. Our emergency line runs 24/7 for anything that can’t wait until a planned visit. Ring any time and tell us what’s happened.
Can you fix fire dampers that fail?
Failed dampers are reported and we can quote to repair or replace them. After the repair, we test it again so the record shows a pass.
Can you quote from pictures?
Yes, where the photos show enough. If not, a site survey comes first, and the quote follows that.
Which accreditations do you hold?
We hold CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
What do you do with what you remove?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. None of it is left on site.
What happens to dampers you can’t get to?
The report lists each inaccessible damper and where it is, so you know exactly what’s outstanding. Fitting an access panel is the usual fix, and we can quote to fit one.
Do you need fire damper testing in Tickleback Row?
Building work often happens right next to dampers. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.
Any of these means the system needs a check-up:
- Dampers hidden with no access panel or hatch
- Dampers that stick or will not close fully
- Dust or grease build-up on damper blades
- Fire damper items raised by an assessor
Historic houses near Tickleback Row, with St Leonard's Hill about 4.7 miles east, are a reminder that older buildings can hold dampers in unexpected places.
What your quote should include
- When they can work, and whether that’s outside your opening hours
- Proof of insurance
- Whether they recommend a next date
- Whether a survey comes first
Fixed quotes for fire damper testing in Tickleback Row
The survey tells us what the work involves. The main factors are:
- The condition we find in the survey
- The scale of the work
- Whether several sites go on one quote
- Access, including roofs, risers and ceiling voids
A single site or a whole portfolio, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before work begins.
What we need to know
Photos and a few facts are often enough to price the work. Useful things to send:
- The site address and the type of premises
- Your opening hours and when the area is out of use
- Your last certificate, test record or report
- Any access panels or hatches you can see
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and we can price many jobs without a visit.
Staff cleaning versus specialist work
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
The process
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. On site, the work takes a couple of hours for a few dampers, and a day or more across a big site. Visits to a village like Tickleback Row are booked in advance, at a time that suits whoever runs the site.
- First we look at any damper register, drawings or earlier test reports.
- We find every damper and open it up through the access panel.
- We release each fire damper blade and operate smoke dampers from their controls.
- Dampers that close fully are reset and left open.
- The results go into a report, with failed dampers and remedials listed.
How to prepare
- Mention any sign-in, permit or induction we need
- Plan for cooking equipment or plant to be off before we arrive
- Tell us the best time to work, such as after service or at a weekend
Getting a quote
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work, before work begins.
Advice
Different parts, different methods
Schools, hospitals and care homes
In hospitals and care homes, people are there day and night. We plan the order of work with the site team to keep disruption to a minimum.
Fusible link fire dampers
The common fire damper uses a link that holds the blade open. When the link reaches its set temperature it melts, and the blade drops to close the duct. Testing means dropping the blade, checking the full close and resetting it.