Oxfordshire · Fire damper testing
Fire damper inspection in Sprig's Alley
Fire damper testing in Sprig's Alley from ventilation hygiene specialists trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Gaps in the fire damper test log
- Dampers flagged on a fire risk assessment
- Corroded dampers in damp risers and plant rooms
Fire damper testing for kitchens and businesses in Sprig's Alley
Each damper we test gets a location, a result and a note of its condition. Passes are reset and left ready to work, and any that fail are listed with the reason. You end up with a clear record to keep with your fire safety documents. If you’re dealing with gaps in the fire damper test log and corroded dampers in damp risers and plant rooms, we can help, from wall and floor dampers, hospitals and care homes and fusible link fire dampers onwards.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, where the dampers are easy to overlook. A first test normally starts with finding them all.
Think of the report as the system’s health record: dated, with pictures, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Where
- Sprig's Alley (OX39)
- Region
- Oxfordshire
- Reporting
- Report and photos after the visit
- Price
- A fixed price before we start
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Checked
- 30 October 2026
What fire damper testing looks like in Sprig's Alley
Oxfordshire Fire and Rescue Service covers Sprig's Alley. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order. For Sprig's Alley, the closest hospital is Thame Community Hospital, roughly 5.6 miles north-west. Healthcare buildings rely on fire compartments to protect people who cannot easily move, and dampers keep those compartments sealed.
Hospitals such as Thame Community Hospital, about 5.6 miles north-west, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Sprig's Alley, the same annual testing applies. Historic buildings that have had ventilation added later can hide dampers in awkward places; Adwell House, about 4.4 miles west, is one of the historic houses in the area around Sprig's Alley.
Sprig's Alley is about 6 miles south-east of Thame, in Oxfordshire. Every kind of commercial site in Sprig's Alley, fire damper testing is something we can help with. Visits can be booked for evenings, overnight or weekends so trading isn’t interrupted. 443 places in Oxfordshire are on our list, from busy centres to quieter spots. For sites nearby, see our Oxford page (15 miles or so).
Work in OX39 is surveyed, quoted and booked the same way as anywhere else. Local streets include Sprigs Holly Lane and Sprigs Holly, all of which we cover for fire damper testing. Nearby, we also carry out fire damper testing in Bennett End (1 mile south-east), Stokenchurch (1 mile south), Rout's Green (1 mile east), Radnage (2 miles south-east) and Waterend (2 miles south-east). Larger places within reach include Oxford (15 miles west), Thame (6 miles north-west), Henley-on-Thames (10 miles south), Benson (10 miles south-west), Headington Quarry (14 miles north-west) and Wallingford (12 miles south-west).
Landmarks near Sprig's Alley
In Sprig's Alley, that means kitchens and buildings near Sir Charles Napier Inn. The nearest railway station is Saunderton station, roughly 2.9 miles east of the centre. A little further out are Thame Community Hospital (5.6 miles north-west). The countryside around Sprig's Alley includes Oakley Hill nature reserve and Bald Hill.
Nearby places to Sprig's Alley
Also in Sprig's Alley
How the visit works
Your staff do not need to do much on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Afterwards, the area is left tidy and the written report follows. Seeing the system in photos first means the trip to Sprig's Alley can be planned properly.
- We plan access and timing with you first, including any out-of-hours work.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- We close everything up and send the results in a report.
Getting ready for the visit
- Let us know how we reach the system, including roofs, risers and plant rooms
- Allow time for equipment near the work to be turned off and cool down
- Tell us about site rules, permits or sign-in
How to get a quote
Some systems can be priced from photos; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before work begins.
Read more
How the job changes from site to site
Schools, hospitals and care homes
Where residents cannot easily get out, holding fire and smoke back matters even more. Annual damper testing is part of keeping that in place.
Access panels
Where there’s no access panel, we record the damper as not tested and say why. We can fit access panels so it’s tested next time.
Between visits
Simple habits between visits make a real difference. We recommend:
- Book the next test before the year runs out
- Keep cables and fixings away from damper blades
- Report leaks or condensation near ductwork quickly
- Keep the damper register up to date after any building work
Pass the report to whoever keeps your fire risk assessment up to date so their assessment matches what was found. Faults on the report are worth closing off quickly.
A simple register of every damper helps a great deal: where each damper is, what kind it is and when it was last tested. It means nothing gets forgotten when staff or contractors change.
Multi-site and managed buildings
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
For anyone managing more than one site, we can schedule visits across all of them on one quote. Every building has its own written report, so each one has its own record.
In-house cleaning or a specialist?
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
What happens if it’s left?
An untested damper is an unknown. A test gives you a clear answer, and we can offer remedials for any that fail, which is far easier to plan for. A planned visit to Sprig's Alley is easier to arrange than an emergency callout.
What you pay depends on the size of the system, what state it’s in and how easy it is to reach. You get a fixed price before we start, so there are no surprises.
Why book with us
- Trading since 2009
- A written report with pictures after every visit
- Fixed quotes, usually within one working day
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Read how cleaning jobs are priced and how to check a contractor.
Your questions about fire damper testing in Sprig's Alley
Do you work in villages like Sprig's Alley?
Yes. Sprig's Alley is within the area we cover across London and the South East. A survey first, from photos or a visit, means we arrive with the right kit.
Who enforces fire safety at workplaces in Sprig's Alley?
That is Oxfordshire Fire and Rescue Service. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
What should I send you?
A short description and a few pictures, with the address and opening hours. We’ll ask for anything else we need.
How often do fire dampers need drop testing?
BESA guidance is that fire dampers are tested on completion of installation and at least annually after that. For spring-operated dampers, once a year is the minimum.
Do we need to close while you work?
Not typically. Booking the work out of hours means the site can carry on as normal. Bigger sites can be done in stages so parts stay in use.
Which sectors do you work in?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, plus food production and leisure sites.
Do you carry out smoke damper testing?
Yes. We test smoke dampers through their control system, as they’re motor driven. Each one is checked for full travel and the result recorded.
Do you have a 24/7 line?
Yes. There’s a 24/7 emergency line for anything that cannot wait until a planned visit. Ring any time and tell us what’s happened.
What a clean won’t put right
An honest diagnosis matters more to us than a booking, so here’s what fire damper testing will not do:
- Fire-stopping gaps around the duct where it passes through the wall
- Control wiring problems outside the damper itself
- Deciding where dampers should be fitted
Not sure which it is? You can ring 0345 646 2711 or drop us a line and we will tell you honestly before you book.
What the work covers
- Fusible link fire dampers
- Riser dampers
- Motorised smoke dampers
- Offices and schools
- Hospitals and care homes
- Wall and floor dampers