Surrey · Fire damper testing

Fire Damper Testing in Shackleford

Fire damper testing for Shackleford and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.

  • Dampers overdue for their annual drop test
  • Fire damper items raised by an assessor
  • Dampers that can’t be reached without an access panel

Fire damper testing for sites in Shackleford

Keeping the system healthy

So the system stays in good health:

  • Act on failed dampers rather than leaving them on file
  • Keep ceiling hatches and duct panels easy to open
  • Report leaks or condensation near ductwork quickly
  • Keep to at least yearly testing

Make sure trades working in ceilings and risers know where the dampers sit, and that they mustn’t tie, wedge or obstruct them. Anything they disturb should be checked again.

Keep a damper register: where each damper is, what kind it is and when it was last tested. It means nothing gets forgotten when staff or contractors change.

How we handle fire damper testing in Shackleford

Testing finds the dampers that will not close. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper rather than leaving you with a problem and no fix. If you’re dealing with dampers affected by leaks or condensation and blades that jam part-way when released, we can put it right, from wall and floor dampers, fusible link fire dampers and hospitals and care homes onwards.

For a building in or near Shackleford, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.

Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.

Place
Shackleford (GU8)
Wider area
Surrey
Paperwork
Report and pictures after the visit
Price
A fixed price before any work starts
Hours
Out of hours as standard, 24/7 emergency line
Call
0345 646 2711
Reviewed
30 October 2026
Before and after view down the inside of a rectangular extract duct

Part by part

Smoke dampers

Because they’re linked to controls, smoke damper tests can need some coordination. We agree the arrangements with you in advance.

Access panels

Where there’s no access panel, we record the damper as not tested and say why. We can fit access panels so it’s tested next time.

For landlords and multi-site operators

Records are where multi-site compliance often slips. Every visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.

Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party, and the report can go to both.

Questions from Shackleford

Which fire authority looks after Shackleford?

It’s Surrey Fire and Rescue Service, which covers Shackleford. If a fire safety officer audits the building, they may ask for the latest damper test records.

Can you work in Shackleford outside opening hours?

Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. Just give us a ring on 0345 646 2711 or drop us a line with your opening times and we will plan around them.

How much does fire damper testing cost in Shackleford?

We do not publish prices, because the cost depends on the job: the size of the system, its condition, access and when we can work. We fix the price before work begins.

Who is the responsible person?

In the words of the Fire Safety Order 2005, it’s the responsible person. That’s generally the employer or the person in control of the premises, and where several people have control, each can have duties. If you are not sure, check your lease and fire risk assessment.

What paperwork do we get after testing?

We test, record and report, rather than certify dampers to a standard. For each damper it shows the result and anything that needs putting right.

Is there a survey before the work?

Yes. Photos often do the job, while bigger or harder-to-see systems are surveyed on site.

What do you do with what you remove?

It leaves the site with us when we go. During the work, it’s contained to keep the area clean.

Are you accredited?

CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’ve been trading since 2009 and we’re fully insured.

What we do, step by step

The visit has three parts: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, and the sign-off is a written report with pictures. The middle part takes longest, and that takes a couple of hours for a few dampers, and a day or more across a big site. Photos of the system and how to reach it help us plan a visit to Shackleford.

  1. We plan access and timing with you first, including any out-of-hours work.
  2. We open up ceilings and hatches and take off each access panel.
  3. We release each blade and check it shuts all the way.
  4. We reset it and record any dirt, corrosion or damage.
  5. Panels and tiles go back, and the results are written up.

How to prepare

  • Move anything stored near the system
  • Allow time for equipment near the work to be turned off and cool down
  • Have your last certificate or report to hand

Getting a quote

The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.

Get a price

Read more

Fire damper testing in Shackleford: local notes

Shackleford is about 32 miles from central London, well within the area we cover across London and the South East. We work evenings, overnight and at weekends, so the visit fits around the site. Milford Hospital is the nearest hospital, about 2.9 miles south-east of Shackleford. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.

If you manage an older building converted to a hotel or venue, like many historic houses in the area (Wanborough Manor is about 2.1 miles north), finding every damper is the first job. If you manage a care home or clinic near Shackleford, the testing that a hospital like Milford Hospital (about 2.9 miles south-east) relies on applies to your dampers too. A school like St Mary's CofE Voluntary Controlled Infant School can have any dampers tested over half-term without disturbing lessons.

Shackleford is about 5 miles south-west of Guildford, in Surrey. Anywhere in GU8, we can carry out fire damper testing at your premises. Shackleford is one of 395 places in Surrey where we work for commercial clients.

Postcode districts we cover here for fire damper testing: GU8. If you need fire damper testing at premises on The Street, Lombard Street and Chalk Lane or a nearby road, we can help. We also cover the places around Shackleford: Hurtmore (1 mile east), Puttenham (2 miles north), Compton (2 miles north-east), Wanborough (2 miles north) and Binscombe (2 miles east). Further out, we also cover Guildford (5 miles north-east), Woking (9 miles north-east), Camberley (10 miles north), Farnham (6 miles west), Dorking (15 miles east) and Frimley (8 miles north).

What’s near Shackleford

Around Shackleford, our work takes us to kitchens and buildings near Middlebriars Wood and Prior's Field School, among other places. The closest station to Shackleford is Godalming station, about 2.2 miles south-east. Nearby you will also find Guildford Castle (4.5 miles north-east) and Charterhouse School Museum (1.8 miles east). Green spaces nearby include Farncombe Wood and Hog's Back.

Map of Shackleford © OpenStreetMap contributors

Why act early in Shackleford

Faults found early are often simpler to put right. Years of corrosion and dirt can mean the whole damper needs replacing instead. Our emergency line runs 24/7, but a planned visit to Shackleford is calmer for everyone.

When the work has to happen, how we reach it and how big the site is can all change the price. We take each of them into account and give you a fixed price before work begins.

Why book with us

  • Out-of-hours work and a 24/7 emergency line
  • We’re fully insured
  • A single point of contact for sites across the South East and London
  • We diagnose before we treat

Take a look at how cleaning jobs are priced and our accreditations.

What your team can do, and what needs us

Staff cleaning does not replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.

Staff cleaning and specialist work aren’t the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.

What fire damper testing cannot fix

In fairness, some problems need a different fix:

  • Fire-stopping gaps around the duct where it passes through the wall
  • Fire alarm or control system faults behind a smoke damper
  • Fire risk assessments, which need a fire risk assessor

Not sure which it is? You can give us a ring on 0345 646 2711 or send us an email and we will tell you honestly.

What we work on in Shackleford

  • Riser dampers
  • Hospitals and care homes
  • Offices and schools
  • Fusible link fire dampers
  • Wall and floor dampers
  • Motorised smoke dampers
BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London