Hampshire · Fire damper testing

Fire Damper Testing in Over Wallop

We cover Over Wallop for fire damper testing. Fixed quotes, work around your opening hours and photo reports as standard.

  • Dust or grease build-up on damper blades
  • Blades that jam part-way when released
  • Dampers that can’t be reached without an access panel

Fire damper testing for sites in Over Wallop

Fire damper testing in Over Wallop, done properly

Fire dampers sit inside ductwork where it passes through a fire-resisting wall or floor. Most are held open by a fusible link that melts at a set temperature, letting the blade drop and close the duct. A drop test shows that the damper still does that when it matters, and every result is written down, damper by damper. We’re often asked to deal with dampers hidden with no access panel or hatch and dirty dampers that may not close, on hospitals and care homes, fusible link fire dampers and motorised smoke dampers.

Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, and the dampers in them are easily forgotten. A first test usually starts with finding them all.

Good records are part of the job. You get a written report with photos after every visit, covering the work done, any areas we couldn’t access and a recommended next date. Keep it with your fire safety records so it’s ready for an insurer, fire officer or EHO.

The Duct Doctor team standing beside their branded white and blue vans
Where
Over Wallop (SO20)
Wider area
Hampshire
Records
Photo report after every visit
Quote
A fixed quote up front
Hours
Nights, weekends or holidays to suit you
Call
0345 646 2711
Last updated
30 October 2026

What we do, step by step

On the day, we arrive at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Anything that needs to be off for the work is switched off and left to cool before work begins, and the area around the work is covered and protected. On site, it takes from an hour or two in a small building to several visits on a large estate. Seeing the system in pictures first means the trip to Over Wallop can be planned properly.

  1. Before the visit, we agree access, timings and any areas with restrictions.
  2. Ceiling tiles and hatches are opened and each damper’s access panel removed.
  3. We release each blade and check it shuts all the way.
  4. We reset it and record any dirt, corrosion or damage.
  5. We close everything up and send the results in a report.

Preparing for the visit

  • Agree a time when the area can be out of use
  • Tell us where we can park and unload
  • Name a contact who can let us in at the agreed time

Get a fixed quote

For fire damper testing in Over Wallop, call us on 0345 646 2711 or email us. Tell us what kind of premises it is and when it’s open, and send pictures or your last report if you can. A fixed quote typically follows within one working day.

Get a price

Related advice

Fire damper testing around Over Wallop

Fire safety in Over Wallop falls to Hampshire and Isle of Wight Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.

For schools like Wallop Primary School, damper testing is easiest in the holidays, when corridors and ceilings are clear.

Over Wallop is about 7 miles south-west of Andover, in Hampshire. Sites in Over Wallop get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where needed and a written report with photos. Our Hampshire coverage runs to 683 places, and Over Wallop is one of them. Southampton is in our area too, about 18 miles from Over Wallop.

We work across the SO20 postcode area for fire damper testing and the streets around it. We cover sites on Station Road, King Lane and King Lane Cottages and the roads around them. We also cover Middle Wallop (1 mile south-east), Kentsboro (2 miles north-east), Nether Wallop (2 miles south-east), Fox (3 miles north) and Amport (4 miles north). Larger places within reach include Winchester (13 miles south-east), Andover (7 miles north-east), Chandler's Ford (14 miles south-east), Romsey (12 miles south-east), Hyde (13 miles south-east) and Tidworth (7 miles north-west).

What’s near Over Wallop

In Over Wallop, that means kitchens and buildings near The White Hart Inn and the streets around them. For rail, the closest station is Grateley station, about 2 miles north-west of the centre. For a walk, there’s Winterbourne Downs RSPB reserve and Quarley Hill.

Map of Over Wallop © OpenStreetMap contributors

Signs you need fire damper testing in Over Wallop

Building work often happens right next to dampers. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.

Any of these means the system needs a check-up:

  • Gaps in the fire damper test log
  • Fire dampers nobody can get to
  • Fire dampers that fail to drop shut
  • Fire dampers with no recent test record

Around Over Wallop, as anywhere, each damper is released, checked, reset and recorded.

What to look for in a quote

  • What happens if part of the system can’t be accessed
  • Whether a written report and photos are included
  • What insurance they carry
  • When they can work, and whether that is outside your opening hours

Questions to ask before booking

Multi-site and managed buildings

Keeping records across a portfolio is half the battle. Every visit ends with a dated report and photos, so you can show an insurer or inspector what was done at each site.

If you look after several sites, we can plan visits across the whole estate and price them together. Each site gets its own report and photos, so records stay tidy.

Fixed quotes for fire damper testing in Over Wallop

We do not publish a price list, because no two systems are the same. The quote depends on:

  • The condition of the system
  • How big the system is
  • How easy every part is to reach
  • How many systems or sites are involved

What you pay depends on the size of the system, what state it’s in and access to every part of it. You get a fixed price before any work starts, so there are no surprises.

Helping us quote

You do not need the technical terms. Just send:

  • The times we could work without disrupting the site
  • Anything you’ve noticed, such as smells, noise, drips or poor airflow
  • Wide pictures of the system and the area around it
  • Any access panels or hatches you can see

To help us quote: the address, the type of site and when it’s open, a few pictures and the last certificate or report, if there is one. Once you have those, phone us on 0345 646 2711 or email us.

Different parts, different methods

Schools, hospitals and care homes

In schools and colleges, testing fits well into holidays and weekends, with no classes to work around.

Smoke dampers

Testing smoke dampers sometimes needs input from whoever looks after the control system. We plan that with you before the visit.

FAQs for Over Wallop

Do you work in villages like Over Wallop?

Yes, Over Wallop is part of our area, however small the site. Photos of the system and directions to the site help us plan the visit.

Which fire and rescue service is responsible for Over Wallop?

It’s Hampshire and Isle of Wight Fire and Rescue Service, which covers Over Wallop. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.

Do you carry out smoke damper testing?

Yes, alongside fire damper drop testing. Smoke and fire dampers are reported together, with any faults set out clearly.

Is a quote from pictures possible?

Typically, yes. Send wide shots, close-ups of any access panels and anything that worries you, and we normally come back within one working day. If photos aren’t enough, we will survey first.

What is TR19?

It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It covers how systems are inspected, cleaned and checked, and it takes a risk-based approach.

What does fire damper testing cost?

We don’t publish prices, because the cost depends on the job: how big it is, what state it’s in, how we reach it and the working hours. You get a fixed price before any work starts.

What should I send you?

A short description and a few pictures, with the address and opening hours. We will ask for anything else we need.

How do you protect the area?

By covering it before any work starts. The work is kept contained and leave the area clean.

Why act early in Over Wallop

An untested damper is an unknown. Testing turns it into a known pass or a known fault, with remedials offered for anything that fails, and that’s something you can plan around. Equipment tucked in a roof space or outbuilding near Over Wallop rarely gets looked at unless someone books it.

One small site or a whole estate, we price it on the same basis: the work involved, the access and the timing. You will have a fixed price before we start.

Why book with us

  • Fixed quotes from a survey or photos
  • We’re fully insured
  • Each visit written up, with pictures
  • Ventilation hygiene specialists since 2009

Take a look at our cost guide or our accreditations.

Looking after it afterwards

Once we’ve finished, these simple steps help:

  • Update the register when ductwork changes
  • Diary the annual test well ahead
  • Store test records alongside the fire risk assessment
  • Keep an eye out for damp around dampers

Pass the report to whoever keeps your fire risk assessment up to date so their assessment matches what was found. Faults on the report are worth closing off quickly.

Keeping to at least annual testing stops small faults turning into failed dampers. Faults caught early are easier to fix.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London