Hampshire · Fire damper testing
Fire damper testing in Martin, Hampshire
Fire damper testing in Martin from ventilation hygiene specialists trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Dampers overdue for their annual drop test
- Smoke dampers with no recent test
- Dirty dampers that may not close
Part by part
Fusible link fire dampers
Most fire dampers are held open by a fusible link. Heat melts the link and the blade falls shut across the duct. We release the blade, check it closes fully and reset it.
Smoke dampers
A smoke damper that does not respond to its controls is recorded as a fault, along with what we saw.
How we handle fire damper testing in Martin
Each damper we test gets a location, a result and a note of its condition. Passes are reset and left ready to work, and any that fail are listed with the reason. That record belongs with the building’s fire safety paperwork. If you have dampers that can’t be reached without an access panel and blades that jam part-way when released, we can put it right, from riser dampers, fusible link fire dampers and hospitals and care homes onwards.
In a village or hamlet like Martin, there may be only a few buildings with fire dampers. Wherever there are dampers, each one needs testing at least annually.
We are CHAS and SafeContractor accredited, we hold ISO 9001 and we’re fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Place
- Martin (SP6)
- Wider area
- Hampshire
- Paperwork
- Written report with photos
- Quote
- A fixed price before any work starts
- Working hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
What happens if it’s left?
Sites in Martin tested every year build up a history for each damper, which shows patterns early. A damper that was slow last year and sticks this year tells you something before it becomes a failure. Rural sites cannot always move to another kitchen or room when something fails.
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, which can make the next visit longer. If you are unsure, give us a ring on 0345 646 2711 or email us for straight advice and a fixed quote.
Why Martin businesses choose us
- One contact for all your sites in London and the South East
- Full insurance on every job
- CHAS, SafeContractor and ISO 9001
- A fixed price before any work starts
Take a look at our cost guide and our accreditations.
Martin buildings and fire safety
Martin sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up.
Every damper we test around Martin gets its own entry in the report, with pictures.
Martin is in Hampshire. Whether your site is in the middle of Martin or further out, we cover fire damper testing for every kind of premises, from a single unit to a large public building. We cover 683 places across Hampshire, large and small. Southampton is in our area too, around 23 miles away.
Every address in SP6 is within our area for fire damper testing, from busy streets to back roads. Local streets include Townsend Lane and Downview Road, and we cover them all for fire damper testing. If your site is just outside Martin, we cover New Forest (1 mile south-west), Rockbourne (3 miles east) and Damerham (3 miles south-east). Larger places within reach include Ringwood (11 miles south-east), Fordingbridge (6 miles south-east), St Leonards (11 miles south), Alderholt (6 miles south-east), Poulner (11 miles south-east) and Ashley Heath (10 miles south).
Local landmarks in Martin
Nearby you’ll also find Cranborne Castle Hill (4.5 miles south). Open spaces near Martin include Western Downs.
Common questions in Martin
Which fire service covers Martin?
Martin is in the area of Hampshire and Isle of Wight Fire and Rescue Service. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Will you come out to Martin?
Yes, smaller places are covered as well as towns. The journey is planned ahead, so a few details about the route help.
What paperwork do we get after testing?
You get a test report recording every damper we tested, showing where it is, whether it passed and what we found. Keep it with your fire safety records.
What information do you need?
The site address, the type of premises and your opening hours, along with a few photos and any previous report.
How much time does a damper test visit need?
It takes anything from a couple of hours for a handful of dampers to a full day for a large building. How easily we can reach the dampers makes the most difference, and we will give you an idea when we quote.
Do you test dampers in the evening or at weekends?
Yes. We work evenings, overnight and weekends, so the building keeps running. We plan the visit around when the building is quietest.
What happens if you can’t reach some of it?
Anything we cannot reach goes on the report, with pictures where possible, and we tell you what would make it reachable, such as extra access panels in ductwork.
What types of premises do you cover?
We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, plus food production and leisure sites.
What we do, step by step
When we arrive, we check the system against the survey or the photos you sent. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes a morning or an afternoon for a small number of dampers, longer where there are many. A quick note on how to find the site and where to park makes a visit to Martin run smoothly.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Each one that passes is reset, ready to work.
- We report on every damper, with faults and suggested remedials set out.
Before we arrive
- Allow time for equipment near the work to be turned off and cool down
- Mention any locked doors, roof access or ceiling voids
- Let us know when the site is closed or quiet
Ask for a quote
Getting a quote does not take long. Send a few details and photos, and we usually reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
Related advice
For landlords and multi-site operators
Whether it’s one building or many, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.
Places near Martin
Other services in Martin
Honest limits
Before booking, it helps to know what’s not included:
- Faults in the alarm or building controls that signal smoke dampers
- Approving the building’s fire strategy
- Gaps in the wall or floor around the damper
Not sure which it is? You can phone us on 0345 646 2711, or send details by email and we’ll tell you honestly before booking.
What the work covers
- Hospitals and care homes
- Fusible link fire dampers
- Offices and schools
- Motorised smoke dampers
- Wall and floor dampers
- Riser dampers
What affects the quote in Martin
The quote reflects the site in front of us. We consider:
- The times the site is available
- How easy every part is to reach
- The condition of the system
- The number of sites or systems
Working hours, access and the scale of the site can all change the price. We take each of them into account, and the price is fixed before we start.
What to send for a quote
You do not need the technical terms. It helps if you can send:
- The site address and the type of premises
- A few general shots of the system
- The times we could work without disrupting the site
- Close-ups of filters, grilles, hatches or access panels
To get a fixed quote, ring 0345 646 2711, or email photos and tell us the type of site, your opening hours and roughly what the system looks like. A few pictures and your last certificate or report help a lot. We normally come back within one working day.
Do you need fire damper testing in Martin?
The law puts a duty on the responsible person to keep fire safety systems, dampers included, in working order. Whoever that is, whether employer, owner, landlord, facilities manager or managing agent, needs to be able to show the dampers work.
What we are most often called out for:
- Gaps in the fire damper test log
- Dampers that can’t be reached without an access panel
- Dampers clogged with dust or grease
- Smoke dampers with no recent test
Dampers that fail a test around Martin are reported with photos, and repairs can be quoted.
What to look for in a quote
- Whether VAT is included
- Whether the price is fixed
- When the next visit should be, and why
- Whether a written report and photos are included