West Sussex · Fire damper testing
Fire damper inspection in Loxwood
Fire damper drop testing and smoke damper testing, with a record for each damper for Loxwood, with a survey first and a report with pictures at the end. Ask us for a fixed quote.
- Dampers that stick or will not close fully
- Smoke dampers that need testing through their controls
- Fire dampers nobody can get to
What we’re called out for in Loxwood
Buildings in Loxwood change owners, tenants and maintenance contractors over the years, and the damper records do not always go with them. Without a register, nobody knows how many dampers there are or when they were last tested.
It’s time to book a visit if you see:
- Buildings with no damper register
- Fire dampers that haven’t been tested for over a year
- Corroded dampers in damp risers and plant rooms
- Dust or grease build-up on damper blades
Every damper we test around Loxwood gets its own entry in the report, with photos.
What to look for in a quote
- How areas they can’t reach will be recorded
- If the quote is a fixed price or an estimate
- What paperwork you get at the end
- Whether the whole system is included, or only the parts that are easy to reach
Fire damper testing for kitchens and businesses in Loxwood
BESA guidance is that fire dampers should be tested by a competent person when they’re installed and at least annually after that. For spring-operated types, annual testing is the minimum. Our job is to do the testing and hand you the paperwork that shows it. We are often asked to deal with corroded dampers in damp risers and plant rooms and dampers clogged with dust or grease, on offices and schools, wall and floor dampers and riser dampers.
Testing in a small place like Loxwood is planned around the journey and access, and the test itself is the same as in any city building.
A written report with photos follows each visit, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Loxwood (RH14)
- Wider area
- West Sussex
- Reporting
- Written report with pictures
- Quotes
- A fixed price before we start
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Loxwood questions
Do you work at weekends in Loxwood?
Yes, evening, overnight and weekend work is normal for us. It means the site in Loxwood keeps running as normal. When you call 0345 646 2711 or use the quote form, mention when the site is quiet.
Can you test school fire dampers in Loxwood out of term?
Yes. Half-terms and the summer break are the natural time for school work. Around Loxwood, the Food Standards Agency lists about 3 schools and colleges with registered kitchens within a mile and a half or so. Just give us a ring on 0345 646 2711 or send us an email with your term dates and we will plan around them.
What if a fire damper won’t close?
We note the failure and what we found. A repair or a replacement can follow as a remedial job with a fresh test at the end.
Do you cover Loxwood?
Yes. We work across Greater London, Surrey, Kent, Sussex, Hampshire, the Isle of Wight, Berkshire, Buckinghamshire, Oxfordshire, Hertfordshire and Essex, Loxwood included.
How much does fire damper testing cost?
Every site is different, so each gets its own fixed quote. For a quote, phone us on 0345 646 2711 or use the quote form with the site type, opening hours and a few pictures.
Do you survey before quoting?
Yes, every time. We diagnose before we treat: the survey shows what needs doing and what access we need and the fixed quote is built on it.
Can you look after several sites?
Yes. Tell us the addresses and what each needs and you will get one fixed quote.
Can you test motorised smoke dampers?
Yes. Every smoke damper is driven through its controls and checked for full movement. Where a controls contractor needs to be involved, we arrange it with you.
Staff cleaning versus specialist work
Logging matters as much as cleaning. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, alongside our reports.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Honest limits
It’s worth knowing the limits before booking:
- Ductwork crossing a fire wall with no damper fitted
- Control wiring problems outside the damper itself
- Fire risk assessments, which need a fire risk assessor
If in doubt, phone us on 0345 646 2711 or email us and we will say what we think.
What we work on in Loxwood
- Riser dampers
- Hospitals and care homes
- Motorised smoke dampers
- Offices and schools
- Wall and floor dampers
- Fusible link fire dampers
What fire damper testing looks like in Loxwood
Food Standards Agency records list about 3 schools, colleges and universities registered as food businesses in and around Loxwood, up to about a mile and a half out. If any of them has ducted ventilation, its dampers need an annual drop test at least. At about 34 miles from central London, Loxwood sits well inside the area we cover. Visits are booked around your hours, evenings and weekends included. Loxwood sits within the area of West Sussex Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
Site managers at schools such as Loxwood Primary School usually find the summer break the easiest time for ceiling work like damper testing.
Loxwood is about 9 miles west of Horsham, in West Sussex. Loxwood gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with pictures. Across West Sussex, we cover 371 places, Loxwood among them. Guildford is in our area too, about 12 miles from Loxwood.
Our technicians cover all of the RH14 postcode area for fire damper testing and the streets around it. That includes premises on High Street, Pond Close and Oak Grove and nearby roads. If your site is just outside Loxwood, we cover Ifold (1 mile south-west), Alfold Bars (1 mile north), Alfold (1 mile north), Plaistow (2 miles west) and Durfold Wood (3 miles west). We also work in nearby towns such as Crawley (14 miles east), Horsham (9 miles east), Broadfield (14 miles east), Storrington (11 miles south), Billingshurst (5 miles south-east) and Bewbush (13 miles east).
What’s near Loxwood
Green spaces nearby include Shillinglee Lake.
How it works
On the day, we arrive at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Anything that needs to be off for the work is switched off and left to cool first, and floors and nearby surfaces are sheeted. On site, it takes a few hours for a single floor, with bigger buildings phased over more than one visit. Visits to a village like Loxwood are booked in advance, at a time that suits whoever runs the site.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- We release each blade and check it shuts all the way.
- The damper is reset and its condition noted.
- Panels and tiles go back, and the results are written up.
Preparing for the visit
- Agree a time when the area can be out of use
- Tell us where we can park and unload
- Name a contact who can let us in at the agreed time
Ask for a quote
Quoting starts with a diagnosis, from your photos and details or, where that isn’t enough, a survey on site. After that, you get a fixed price for the work so you know the cost before any work starts.
Related advice
Keeping the system healthy
Aftercare is simple, and it makes the next visit easier:
- Get remedials done soon after a failed test
- Tell contractors where dampers are before they start work
- Diary the annual test well ahead
- Add new dampers to the register as they’re fitted
Tell other contractors where the dampers are, and that they mustn’t tie, wedge or obstruct them. If a damper has been disturbed, have it tested again.
Make sure every damper can be reached. If a damper has no access panel, have one fitted before the next test.
What affects the cost of fire damper testing
There’s no set price list, because sites vary so much. The quote depends on:
- The number of sites or systems
- The condition of the system
- Access, including roofs, risers and ceiling voids
- Parking and loading at the site
You won’t find a price list here, because each job is priced on what it involves. Call for a fixed quote, and we will explain what it covers.
Helping us quote
You don’t need the technical terms. Just send:
- The postcode and the type of business
- Your opening hours and when the area is out of use
- Wide pictures of the system and the area around it
- The roof, plant room or outside wall the system runs to
To get a fixed quote, phone us on 0345 646 2711 or send us an email with the site type, your trading hours and a short description of the system. A few photos and your last certificate or report help a lot. We typically come back within one working day.
Managing agents and facilities teams in Loxwood
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We can quote either party and send the paperwork to whoever needs it.