Hampshire · Fire damper testing
Fire damper testing in Kimpton, Hampshire
Fire damper testing in Kimpton, surveyed first and signed off with a written report and photos. Ask us for a fixed quote.
- Fire dampers that fail to drop shut
- Motorised smoke dampers due for testing
- Dampers that can’t be reached without an access panel
Part by part
Schools, hospitals and care homes
Schools are often easiest to test during the holidays, with no classes to work around.
Offices and retail
In offices and retail units, dampers tend to be hidden above working areas. Testing can be done outside opening hours so the space stays open.
About our fire damper testing in Kimpton
Fire dampers sit inside ductwork where it passes through a fire-resisting wall or floor. Most are held open by a fusible link that melts at a set temperature, letting the blade drop and close the duct. A drop test shows that the damper still does that when it matters, and we record the result for every damper we test. Common call-outs are for dampers affected by leaks or condensation and dampers that stick or won’t close fully, across motorised smoke dampers, fusible link fire dampers and wall and floor dampers.
Rural buildings that have been converted or extended can have ducts passing through fire-resisting walls, and the dampers in them are easily forgotten. The first visit starts by locating each damper.
Insurers, fire officers and environmental health officers all look at records. That’s why every job is written up in a report with pictures, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Place
- Kimpton (SP11)
- Wider area
- Hampshire
- Reporting
- Photo report after every visit
- Quote
- A fixed price before any work starts
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
What we’re called out for in Kimpton
Corrosion is another common cause of failure. Condensation, leaks and damp plant rooms corrode the parts that need to move, and the damper can seize quietly where no one sees it.
If you notice any of these, it’s worth a diagnosis:
- Dampers that stick or won’t close fully
- Smoke dampers that need testing through their controls
- Fire dampers that haven’t been tested for over a year
- Rusted damper blades and springs
Andover War Memorial Hospital, about 4.6 miles east of Kimpton, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
Comparing quotes
- Which accreditations they hold, and whether you can check them
- Whether they recommend a next date
- What hours they’ll be on site
- Whether a survey comes first
Common questions in Kimpton
Can you come to Kimpton after we close?
Yes. We work evenings, overnight and at weekends. It means the site in Kimpton keeps running as normal. Just call 0345 646 2711, or send details by email with your opening times and we’ll plan around them.
Do you cover smaller places like Kimpton?
Yes. Villages and rural sites across the South East are part of our work, Kimpton included. The journey is planned ahead, so a few details about the route help.
Can you set up regular visits?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, depending on what the system needs.
Do you look at the system first?
Yes. We always survey first, either from photos and details you send or on a site visit. A fixed quote follows.
Which accreditations do you hold?
We hold CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
Who has the legal duty for fire safety?
That depends on who controls the premises. The Fire Safety Order 2005 puts the duty on the responsible person, which may be the employer, owner, landlord, facilities manager or managing agent.
Is a quote from pictures possible?
In many cases, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Where we can’t see enough, we arrange a survey.
Do we need to close while you work?
Not typically. We need the work area to ourselves while we’re on site, so we book a time when it would be closed anyway.
How the visit works
A visit follows the same order every time: protect the area, isolate whatever needs isolating, do the work, tidy up and hand over the paperwork. The visit itself takes a few hours for a single floor, with bigger buildings phased over more than one visit. A quick note on how to find the site and where to park makes a visit to Kimpton run smoothly.
- First we look at any damper register, drawings or earlier test reports.
- Each damper is located and reached through its access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- We reset every damper that passes and check it’s left open.
- We report on every damper, with faults and suggested remedials set out.
Preparing for the visit
- Make sure someone can let us in and lock up afterwards
- Let us know about parking and loading
- Move anything stored near the system
Ask for a quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before work begins.
Read more
Nearby places to Kimpton
What else we do in Kimpton
Multi-site and managed buildings
Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We’re happy to deal with either side and send the paperwork to whoever needs it.
Whether it’s one building or many, the standard is the same: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
Looking after it afterwards
To keep the system working properly between visits:
- Fix water leaks in plant rooms and risers promptly
- Store test records alongside the fire risk assessment
- Tell contractors where dampers are before they start work
- Diary the annual test well ahead
Make sure trades working in ceilings and risers know where the dampers sit, and ask them not to run cables through or wedge them. Anything they disturb should be checked again.
The simplest way to avoid failures is to test on time, every year. Faults caught early are easier to fix.
Why it’s worth doing now in Kimpton
An untested damper is an unknown. A test gives you a clear answer, and we can offer remedials for any that fail, which is far easier to plan for. In a place like Kimpton, ductwork and fans are easy to forget until something goes wrong.
The cost depends on how big the system is, the condition it’s in and how easy it is to reach. You get a fixed price before work begins, so there are no surprises.
Why book with us
- Survey first, then a fixed quote
- Out-of-hours work and a 24/7 emergency line
- Each visit written up, with pictures
- Accredited under CHAS and SafeContractor, with ISO 9001
Take a look at our cost guide or our accreditations.
Fire damper testing in Kimpton: local notes
For Kimpton, the closest hospital is Andover War Memorial Hospital, roughly 4.6 miles east. Where patients or residents may need help to leave a building, working dampers matter all the more. Hampshire and Isle of Wight Fire and Rescue Service covers Kimpton. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
Drop testing in and around Kimpton means releasing each blade, watching it close and resetting it.
Kimpton is about 5 miles west of Andover, in Hampshire. Whatever kind of site you run in Kimpton, we can take on fire damper testing. We can work out of hours so the site keeps running. Kimpton is one of 683 places in Hampshire we cover for commercial clients. We also work in Southampton, around 23 miles away.
Fire damper testing in SP11 follows the same survey, fixed quote and written report as everywhere else we cover. Streets in the area include Cow Lane, Deacon Road and Down Road, and we cover them all for fire damper testing. Neighbouring places we cover for fire damper testing include Great Shoddesden (1 mile north), Perham Down (2 miles north-west), Ludgershall (2 miles north-west), Tidworth (3 miles west) and Shipton Bellinger (3 miles west). Within a short drive, we also cover Andover (5 miles east), Whitchurch (11 miles east), East Anton (6 miles east), Harestock (15 miles south-east), Overton (15 miles east) and Picket Piece (7 miles east).
Around Kimpton
The closest station to Kimpton is Grateley station, roughly 3.9 miles south. Well-known places in the area include Ludgershall Castle (2.6 miles north-west) and Andover War Memorial Hospital (4.6 miles east). Not far away are Anton Lakes and Quarley Hill.
Fixed quotes for fire damper testing in Kimpton
The price is fixed before any work begins. It’s based on:
- When the work can happen, such as evenings, overnight or weekends
- How easy every part is to reach
- Whether it’s a one-off visit or part of a schedule
- The condition of the system
Working hours, access and the scale of the site can all change the price. We take each of them into account, and the price is fixed before any work starts.
Helping us quote
When you contact us, these details help:
- When the site is open and when it’s quiet
- Your last certificate, test record or report
- Photos showing the whole system and its surroundings
- Close-ups of filters, grilles, hatches or access panels
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and we can price many jobs without a visit.