Kent · Fire damper testing
Fire damper testing in Hearnden Green, Kent
Fire damper testing for Hearnden Green, with a survey first and a report with photos at the end. Ask us for a fixed quote.
- Buildings with no damper register
- Dust or grease build-up on damper blades
- Fire dampers nobody can get to
What your team can do, and what needs us
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, they should report it rather than try to fix it. We will take a look and give you a fixed quote.
About our fire damper testing in Hearnden Green
Under BESA guidance, every fire damper is tested on completion of installation and then at least once a year. For spring-operated types, annual testing is the minimum. We carry out fire damper testing for buildings in Hearnden Green and give you the records to show it’s been done. If you have fire damper items raised by an assessor and dirty dampers that may not close, we can put it right, from wall and floor dampers, motorised smoke dampers and fusible link fire dampers onwards.
Somewhere as small as Hearnden Green, fire dampers are usually found in a school, a care home, a hotel or a converted building, wherever there is one. Wherever there are dampers, each one needs testing at least annually.
A written report with photos follows every visit, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Place
- Hearnden Green (TN27)
- Wider area
- Kent
- Paperwork
- Photo report after every visit
- Quotes
- A fixed price before any work starts
- When we work
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
Do you need fire damper testing in Hearnden Green?
Building work often happens right next to dampers. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.
The symptoms we are asked about most include:
- Fire damper items raised by an assessor
- Blades that jam part-way when released
- Dampers that cannot be reached without an access panel
- Fire dampers that haven’t been tested for over a year
Around Hearnden Green, as anywhere, each damper is released, checked, reset and recorded.
What your quote should include
- Whether the whole system is included, or only the parts that are easy to reach
- If they look at the system before pricing
- Whether VAT is included
- How areas they cannot reach will be recorded
How the visit works
The first job on site is protection: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. It takes from an hour or two in a small building to several visits on a large estate, and we clear up before we go. In a small place like Hearnden Green, the journey is planned ahead and the visit arranged around the site’s hours.
- First we look at any damper register, drawings or earlier test reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Each one that passes is reset, ready to work.
- The results go into a report, with failed dampers and remedials listed.
Preparing for the visit
- Clear loose items from the work area
- Plan for cooking equipment or plant to be off before we arrive
- Let us know about parking and loading
Ask for a quote
Some systems can be priced from photos; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before work begins.
Related advice
Between visits
Results last longer with the right care. Here’s what we suggest:
- File every damper report where your assessor can find it
- Never wedge or tie a damper open
- Get remedials done soon after a failed test
- Brief other trades about dampers in ceilings and risers
Tell other contractors where the dampers are, and that they mustn’t tie, wedge or obstruct them. Anything they disturb should be checked again.
Make sure every damper can be reached. Where there’s no hatch, an access panel makes testing possible ahead of the next visit.
Your questions about fire damper testing in Hearnden Green
Will you come out to Hearnden Green?
Yes, Hearnden Green is part of our area, however small the site. Let us know about access, parking and anything unusual about getting there when you book.
Do you work overnight in Hearnden Green?
Yes, out-of-hours work is a big part of what we do. Your customers, staff or residents in Hearnden Green needn’t be disturbed. Let us know the hours you’re closed and we’ll book within them.
What’s TR19?
TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Which kinds of sites do you work on?
Commercial premises of every kind: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. We fit the work around how the site operates.
What if parts of the system can’t be reached?
We never leave them off the paperwork. The report says which parts couldn’t be reached and why, along with a quote to put access in.
What does fire damper testing cost?
It depends on the site, so we quote each one individually. For a quote, ring 0345 646 2711 or drop us a line and tell us about the site and its opening hours.
Can you come out in an emergency?
Yes. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we will advise on what to do next.
What accreditations do you have?
We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
Fire damper testing in Hearnden Green: local notes
Hearnden Green is covered by Kent Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers. At about 37 miles from central London, Hearnden Green sits well inside the area we cover. Evening, overnight and weekend visits are all possible.
If you manage an older building converted to a hotel or venue, like many historic houses in the area (Leeds Castle is about 4.1 miles north), finding every damper is the first job.
Hearnden Green is about 6 miles south-east of Maidstone, in Kent. Sites in Hearnden Green get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. We cover 922 places across Kent, from busy centres to quieter spots. For sites nearby, see our Maidstone page (6 miles or so).
Here we cover the TN27 postcode area for fire damper testing. We also cover Headcorn (1 mile south-east), Southernden (2 miles east), Swift's Green (3 miles south-east), Smarden Bell (3 miles south-east) and Lashenden (4 miles south). Within a short drive, we also cover Maidstone (6 miles north-west), Ashford (12 miles east), Sittingbourne (12 miles north-east), Royal Tunbridge Wells (15 miles west), Tonbridge (15 miles west) and Faversham (15 miles north-east).
Around Hearnden Green
For rail, the closest station is Headcorn station, roughly 1.8 miles south of the centre. Other landmarks nearby include Sutton Valence Castle (1.7 miles north-west) and Kent Firefighting Museum (3.6 miles south).
Managing agents and facilities teams in Hearnden Green
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party and send the paperwork to whoever needs it.
Whether it’s one building or many, you get the same standard: diagnosis, a fixed price, work booked around your hours and a written report with photos.
How we price fire damper testing
We do not publish a price list, because sites vary so much. The quote depends on:
- Working hours and out-of-hours timing
- Whether we need access equipment or extra panels
- The number of sites or systems
- How big the system is
Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered, and you will get one fixed quote.
Helping us quote
Many jobs can be priced from pictures and some basics. Useful things to send:
- Your last certificate, test record or report
- Close-ups of filters, grilles, hatches or access panels
- Where the site is and what kind of site it is
- Photos showing the whole system and its surroundings
The quickest way to a quote is to send photos: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.
Honest limits
We’d rather tell you now than book work that will not help, so here are the limits:
- Control wiring problems outside the damper itself
- Approving the building’s fire strategy
- Gaps in the wall or floor around the damper
If you’re not sure, just give us a ring on 0345 646 2711, or send details by email and we’ll give you a straight answer before booking.
Where we work
- Wall and floor dampers
- Motorised smoke dampers
- Hospitals and care homes
- Fusible link fire dampers
- Riser dampers
- Offices and schools