Surrey · Fire damper testing
Fire Damper Testing in Gomshall
For fire damper testing in Gomshall, one call is all it takes, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Fire dampers with no recent test record
- Fire dampers nobody can get to
- Dampers that stick or will not close fully
How the job changes from site to site
Smoke dampers
Smoke dampers are motorised and run by a control system. Testing means operating them from the controls and check each blade travels fully.
Fusible link fire dampers
Most fire dampers are held open by a fusible link. Heat melts the link and the blade falls shut across the duct. We release the blade, check it closes fully and reset it.
About our fire damper testing in Gomshall
Responsible persons, facilities managers and managing agents call us when damper testing falls due in Gomshall. Send us the damper schedule or the drawings if you have them, and we’ll plan the visit around the building’s hours. The work covers offices and schools, motorised smoke dampers and riser dampers, and the jobs we see most are dirty dampers that may not close and dampers that can’t be reached without an access panel.
In a village or hamlet like Gomshall, there may be only a few buildings with fire dampers. Wherever there are dampers, each one needs testing at least annually.
Every visit ends with a written report and pictures, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Where
- Gomshall (GU5)
- Region
- Surrey
- Paperwork
- Photo report after every visit
- Quote
- A fixed price before work begins
- Hours
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
What staff can safely do
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but they do not reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
Questions from Gomshall
Can you get to a site in Gomshall?
Yes, Gomshall is part of our area, however small the site. A survey first, from pictures or a visit, means we arrive with the right kit.
Who is the fire and rescue service for Gomshall?
Surrey Fire and Rescue Service is the fire and rescue service for Gomshall. If a fire safety officer audits the building, they may ask for the latest damper test records.
What should I send you?
Where the site is, what it is and when it’s open, along with a few pictures and any previous report.
Is TR19 cleaning required by law?
No. TR19® itself is not law; it’s a BESA specification. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
How much notice should we give?
For planned work, earlier is better, especially if the next clean or test is due soon. For emergencies, we take calls 24/7.
How much does fire damper testing cost in Gomshall?
Size, condition, access and working hours all affect the cost. Call for a fixed quote, usually ready within one working day.
What happens if a damper fails its test?
Failed dampers are reported and we can quote to repair or replace them. After the repair, we test it again so the record shows a pass.
What do you do to protect the area?
By covering it before any work starts. The work is kept contained and leave the area clean.
Do you need fire damper testing in Gomshall?
Rust is a frequent reason a damper won’t close. Condensation, leaks and damp plant rooms corrode the parts that need to move, and the damper can seize quietly where no one sees it.
Keep an eye out for any of the following:
- Dampers that can’t be reached without an access panel
- Fire dampers with no recent test record
- Dampers clogged with dust or grease
- Gaps in the fire damper test log
Historic houses near Gomshall, with Hatchlands Park about 2.9 miles north, are a reminder that older buildings can hold dampers in unexpected places.
What your quote should include
- What hours they’ll be on site
- Exactly which parts of the system are covered
- When the next visit should be, and why
- Whether they’re fully insured
Towns and villages near Gomshall
Other services in Gomshall
Looking after it afterwards
So the system stays in good health:
- Keep an eye out for damp around dampers
- File every damper report where your assessor can find it
- Do not let hatches get painted shut or boarded over
- Never wedge or tie a damper open
Make sure trades working in ceilings and risers know where the dampers sit, and ask them not to run cables through or wedge them. Anything they disturb should be checked again.
The simplest way to avoid failures is to test on time, every year. A blade that is just starting to stick is easier to deal with than a seized one.
How the visit works
Night work is normal for us. Evenings, nights and weekends are when much of our work happens, so a kitchen or building can carry on as usual the next day. The visit itself takes from an hour or two in a small building to several visits on a large estate. Photos of the system and how to reach it help us plan a visit to Gomshall.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
Preparing for the visit
- Let us know about parking and loading
- Agree a time when the area can be out of use
- Arrange a key holder or contact on site
Ask for a quote
There’s no standard price list, because every site is different. We look at your system first, from photos or on a visit, and then send you a fixed quote. To get going, call 0345 646 2711, or send details by email.
Advice
What fire damper testing looks like in Gomshall
Gomshall sits within the area of Surrey Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order. Gomshall is about 25 miles from central London, well within the area we cover across London and the South East. The visit is fixed around your opening hours, not ours.
The nearest hospital, St. Luke’s Hospital, is about 4.9 miles west; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly. If you manage a school site such as Shere CofE Aided Infant School, any fire dampers can be tested in the holidays.
Gomshall is about 5 miles west of Dorking, in Surrey. Sites in Gomshall get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where needed and a written report with photos. Our area takes in 395 places across Surrey, large and small. Our Guildford page covers sites nearby (6 miles or so).
Postcode districts we cover here for fire damper testing: GU5. You’ll find streets such as Station Road, High View and Queen Street, all of which we cover for fire damper testing. We also cover the places around Gomshall: Shere (1 mile west), Abinger Hammer (1 mile east), Hoe (1 mile south), Albury Heath (1 mile west) and Little London (1 mile south-west). We also work in nearby towns such as Guildford (6 miles west), Woking (9 miles north-west), Camberley (14 miles north-west), Epsom (11 miles north-east), Horley (12 miles east) and Redhill (12 miles east).
Near you in Gomshall
Typical jobs here are in premises near Black Horse pub and Colekitchen Down and the streets around them. There’s a railway station in Gomshall itself: Gomshall station. Nearby you will also find Abinger Castle (2.2 miles south-east) and Shere Museum (0.6 miles west). Open spaces near Gomshall include Silent Pool and Combe Bottom.
Managing agents and facilities teams in Gomshall
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party and send the paperwork to whoever needs it.
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Every building has its own written report, so records stay tidy.
When it’s something else
Before booking, it helps to know what’s not included:
- Designing the building’s fire compartments
- Dampers that were never installed where they’re needed
- Fire alarm or control system faults behind a smoke damper
If you are not sure, just phone us on 0345 646 2711, or send details by email and we will give you a straight answer before booking.
What the work covers
- Wall and floor dampers
- Hospitals and care homes
- Offices and schools
- Riser dampers
- Motorised smoke dampers
- Fusible link fire dampers