Surrey · Fire damper testing
Fire Damper Testing in Dunsfold
Professional fire damper testing in and around Dunsfold, booked around your opening hours and signed off in writing with pictures.
- Gaps in the fire damper test log
- Motorised smoke dampers due for testing
- Dampers that can’t be reached without an access panel
About our fire damper testing in Dunsfold
Fire dampers sit inside ductwork where it passes through a fire-resisting wall or floor. A fusible link holds the blade open until heat melts it, and the blade then drops to shut the duct. Drop testing proves that this still happens, and every result is written down, damper by damper. If you have dampers affected by leaks or condensation and damper actions from a fire risk assessment, we can put it right, from offices and schools, riser dampers and wall and floor dampers onwards.
For a building in or near Dunsfold, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. On top of that, we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.
- Where
- Dunsfold (GU8)
- Wider area
- Surrey
- Reporting
- Report and photos after the visit
- Quotes
- Fixed quote, typically within a working day
- Hours
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
What the work involves, part by part
Ceiling voids and risers
Risers and service shafts often hold dampers at each floor. Testing goes floor by floor so nothing is missed.
Fusible link fire dampers
The common fire damper uses a link that holds the blade open. When the link reaches its set temperature it melts, and the blade drops to close the duct. Testing means dropping the blade, checking the full close and resetting it.
Your questions about fire damper testing in Dunsfold
Will you come out to Dunsfold?
Yes, smaller places are covered as well as towns. Photos of the system and directions to the site help us plan the visit.
Which fire and rescue service is responsible for Dunsfold?
It’s Surrey Fire and Rescue Service, which covers Dunsfold. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Are you accredited?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We’re fully insured and have been trading since 2009.
What happens if you can’t reach some of it?
We record them on the report, with photos where possible, and we tell you what would make it reachable, such as extra access panels in ductwork.
How do you protect the area?
We start with protection: sheeting over floors, worktops and anything close to the work. We tidy up and take our waste away before we leave.
Can you test out of hours?
Yes. Testing can be booked outside working hours, which suits offices, retail and schools. Hospitals and care homes are planned with the site team.
Are you fully insured?
Yes. We carry full insurance, and we have been trading since 2009.
Can you test motorised smoke dampers?
Yes. We test smoke dampers through their control system, as they’re motor driven. Each one is checked for full travel and the result recorded.
Managing agents and facilities teams in Dunsfold
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
We also work for facilities teams across offices, schools and healthcare across Surrey. Work can be phased by floor, building or site around the people who use them.
What we are called out for in Dunsfold
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has a duty to keep fire safety measures working, and dampers are part of those measures. Whoever that is, whether employer, owner, landlord, facilities manager or managing agent, needs to be able to show the dampers work.
Most sites get in touch after spotting one of these:
- Dampers flagged on a fire risk assessment
- Buildings with no damper register
- Fire dampers nobody can get to
- Dampers that stick or won’t close fully
If you manage a care home or clinic near Dunsfold, the testing that a hospital like Milford Hospital (about 4.3 miles north-west) relies on applies to your dampers too.
Comparing quotes
- Whether the quote shows VAT
- Proof of accreditation you can verify
- Whether a written report and pictures are included
- What’s included in the scope, part by part
Other services in Dunsfold
What we do, step by step
A visit follows the same order every time: protect the area, make the system safe, do the work, clear away and hand over the paperwork. The visit itself takes a morning or an afternoon for a small number of dampers, longer where there are many. A few photos of the system help us make the most of a visit to a place like Dunsfold.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- Panels and tiles go back, and the results are written up.
Preparing for the visit
- Move anything stored near the system
- Dig out any earlier paperwork for the system
- Name a contact who can let us in at the agreed time
How to get a quote
If you need fire damper testing in Dunsfold, ring 0345 646 2711, or email photos. Let us know the site type and the opening hours, and send photos or your last report if you can. A fixed quote typically follows within one working day.
Advice
What your team can do, and what needs us
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. Leave those to us.
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
What affects the quote in Dunsfold
Some jobs are bigger than they look, and some smaller. What affects the quote:
- The condition we find in the survey
- Whether it’s a one-off visit or part of a schedule
- Where the site is and how we reach it
- Site requirements such as sign-in and permits
What you pay depends on how big the system is, what state it’s in and access to every part of it. We give you a fixed price before any work starts, so you know where you stand.
Helping us quote
To speed up the quote, please include:
- Where the site is and what kind of site it is
- A few general shots of the system
- The roof, plant room or outside wall the system runs to
- Any symptoms, from odd noises to smells or leaks
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To get going, phone us on 0345 646 2711 or use the quote form.
Between visits
Here’s the after-treatment advice, in brief:
- Update the register when ductwork changes
- Store test records alongside the fire risk assessment
- Keep ceiling hatches and duct panels easy to open
- Report leaks or condensation near ductwork quickly
Pass the report to whoever keeps your fire risk assessment up to date so their assessment matches what was found. Faults on the report are worth closing off quickly.
The simplest way to avoid failures is to test on time, every year. A blade that’s just starting to stick is easier to deal with than a seized one.
Dunsfold buildings and fire safety
We cover Dunsfold, about 33 miles from central London, as part of our work across London and the South East. Visits are booked around your hours, evenings and weekends included. For Dunsfold, the closest hospital is Milford Hospital, roughly 4.3 miles north-west. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.
Drop testing in and around Dunsfold means releasing each blade, watching it close and resetting it.
Dunsfold is about 9 miles south of Guildford, in Surrey. We provide fire damper testing for commercial premises of every kind in Dunsfold and the rest of Surrey. Our Surrey coverage runs to 395 places, and Dunsfold is one of them. We also work in Guildford, about 9 miles from Dunsfold.
Our technicians cover all of the GU8 postcode area for fire damper testing and the roads nearby. Whether your site is on Binhams Meadow, Dunsfold Common Road and Nugent Close or anywhere close by, we can help. Other places close to Dunsfold include Loxhill (1 mile north), Hascombe (2 miles north), Alfold Crossways (2 miles south-east), Elmbridge Village (2 miles north-east) and Grafham (3 miles north). We also work in nearby towns such as Guildford (9 miles north), Woking (14 miles north), Farnham (12 miles north-west), Dorking (13 miles north-east), Frimley (15 miles north-west) and Haslemere (7 miles west).
What’s near Dunsfold
Locally, jobs take us to businesses close to Fir Tree Copse and The Sun Inn Public House, among other places. For rail, the closest station is Witley station, roughly 3.8 miles west of the centre. A little further out are Milford Hospital (4.3 miles north-west). The countryside around Dunsfold includes Lower Lake and Hydon's Ball.