Slough · Fire damper testing
Fire damper testing in Ditton, Slough
Fire damper testing for Ditton, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Dampers flagged on a fire risk assessment
- Fire dampers nobody can get to
- Dampers overdue for their annual drop test
How the job changes from site to site
Smoke dampers
Testing smoke dampers sometimes needs input from whoever looks after the control system. We plan that with you before the visit.
Offices and retail
Fit-outs and tenant changes are hard on dampers. Testing after a fit-out shows whether anything was disturbed.
About our fire damper testing in Ditton
BESA guidance is that fire dampers should be tested by a competent person when they’re installed and at least annually after that. For spring-operated types, annual testing is the minimum. Our job is to do the testing and hand you the paperwork that shows it. If you’re dealing with damper actions from a fire risk assessment and fire dampers nobody can get to, we can help.
Testing in a small place like Ditton is planned around the journey and access, and the test itself is the same as in any city building.
A written report with photos follows each visit, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Place
- Ditton (SL3)
- Wider area
- Slough
- Reporting
- Written report with photos
- Quotes
- A fixed quote up front
- Hours
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
Staff cleaning versus specialist work
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
Keep a record of what your team does. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, alongside our reports.
Nearby places to Ditton
More services for Ditton
For landlords and multi-site operators
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, which may be the employer, owner, landlord, FM or managing agent. Where responsibility is shared, records matter even more.
Keeping records across a portfolio is half the battle. Each visit produces a dated report with pictures, so you can show an insurer or inspector what was done at each site.
Ditton buildings and fire safety
The FSA’s food hygiene register lists about 17 schools, colleges and universities, about 13 caring premises (care homes, nurseries and hospitals) and about 8 hotels, B&Bs and guest houses with registered kitchens or food service in Ditton and the streets around it, up to about 1.5 miles out. Buildings like these often have ducted ventilation, and wherever a duct crosses a fire-resisting wall or floor there should be a damper, tested at least once a year. The nearest hospital to Ditton is Upton Hospital, about 1.5 miles north-west. Where patients or residents may need help to leave a building, working dampers matter all the more. Fire safety in Ditton falls to Royal Berkshire Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
If you manage offices, shops or flats near Datchet station, the ductwork in them may pass through fire-resisting walls and floors, and any dampers need testing at least once a year. If you manage an older building converted to a hotel or venue, like many historic houses in the area (Frogmore House is about 1.7 miles south-west), finding every damper is the first job. If you manage a school site such as Castleview Primary School, any fire dampers can be tested in the holidays.
Ditton is about 2 miles south-east of Slough, in Slough. Every kind of commercial site in Ditton, we can take on fire damper testing. We can work out of hours so trading is not interrupted. We cover 31 places across Slough, large and small. Guildford is in our area too, around 17 miles away.
All of SL3 is covered for fire damper testing, from busy streets to back roads. Fire damper testing is available to premises on Thorn Road, Ditton Road and London Road and the roads around them. Neighbouring places we cover for fire damper testing include Datchet (1 mile south-west), Myrke (1 mile north-west), Brands Hill (1 mile south-east), Sunnymeads (2 miles south) and Colnbrook (2 miles east). Larger places within reach include Cippenham (4 miles north-west), Britwell (4 miles north-west), Burnham (5 miles north-west), Stoke Poges (4 miles north), Huntercombe (4 miles north-west) and Farnham Common (5 miles north-west).
Near you in Ditton
Typical jobs here are in premises near Ditton Park, Ditton Park Academy and Upton Court Grammar School, among other places. Ditton’s nearest station is Datchet station, about 0.8 miles south-west of the centre. Other landmarks nearby include Upton Hospital (1.5 miles north-west) and Museum of Eton Life (1.9 miles west). For a walk, there’s Staines Reservoirs and Stoke Common.
Ditton: your questions answered
Can you get to a site in Ditton?
Yes, Ditton is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.
Which fire and rescue service is responsible for Ditton?
Ditton is in the area of Royal Berkshire Fire and Rescue Service. If a fire safety officer audits the building, they may ask for the latest damper test records.
Can you set up regular visits?
Yes. Plans on a 3, 6 or 12-monthly cycle are available, to suit the system and how it’s used.
How often does BESA say fire dampers should be tested?
BESA’s guidance is a test on installation and at least once a year after that. Some sites choose to test more often where the risk is higher.
Do you survey before quoting?
Yes. Photos often do the job, and larger or hidden systems get a visit.
How do you keep the site clean during the work?
Protection goes down first: sheeting over floors, worktops and anything close to the work. We tidy up and take our waste away before we leave.
How much time does a damper test visit need?
A visit takes a couple of hours for a few dampers, and a day or more across a big site. Bigger sites can be phased, and you can phone us on 0345 646 2711 or send us an email to talk it through.
Do you work with multi-site operators?
Yes. One number covers all your sites across London and the South East, and visits can be set on a regular cycle.
Why deal with it now?
Testing every year builds a history for each damper, which shows patterns early. A damper that was slow last year and sticks this year tells you something before it becomes a failure. Equipment tucked in a roof space or outbuilding near Ditton rarely gets looked at unless someone books it.
A single site or a whole portfolio, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before any work starts.
Why choose Duct Doctor in Ditton
- We diagnose before we treat
- In business since 2009
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Fixed quotes from a survey or pictures
Read our cost guide or our accreditations.
What happens on the day
On the day, we arrive at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Anything that needs to be off for the work is switched off and left to cool first, and the area around the work is covered and protected. The work itself takes a few hours for a single floor, with bigger buildings phased over more than one visit. Pictures of the system and its access let us plan the work in Ditton before we set off.
- We plan access and timing with you first, including any out-of-hours work.
- We open up ceilings and hatches and take off each access panel.
- The blade is released and watched to make sure it closes fully.
- We reset it and record any dirt, corrosion or damage.
- We close everything up and send the results in a report.
Preparing for the visit
- Have your last certificate or report to hand
- Tell us the best time to work, such as after service or at a weekend
- Make sure equipment near the work can be switched off and left to cool
Getting a quote
Quotes are quick. Call or email with a few details and you’ll normally have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Read more
Looking after it afterwards
Looking after the system between visits is straightforward, and it makes the next visit easier:
- Act on failed dampers rather than leaving them on file
- Update the register when ductwork changes
- Tell contractors where dampers are before they start work
- Keep to at least yearly testing
The next test should be no more than a year away. BESA guidance is at least annual testing, so it helps to book it before the date slips.
Keep a damper register: location, type, last test date and result. It means nothing gets forgotten when staff or contractors change.
How we price fire damper testing
You will get a fixed price before we start. It’s based on:
- The condition we find in the survey
- How many systems or sites are involved
- One-off work versus a regular cycle
- How big the system is
We do not list prices on the website, because the cost depends on the site in front of us. For a fixed quote, give us a ring on 0345 646 2711, or email photos, and we will talk you through it.
What to send for a quote
You do not need the technical terms. Just send:
- When the site is open and when it’s quiet
- The postcode and the type of business
- How we’d reach plant on a roof or in a plant room
- Any symptoms, from odd noises to smells or leaks
Need a price for fire damper testing? Please ring 0345 646 2711 or use the quote form with a few details about the site. We will explain what we’d do and send a fixed quote before you commit to anything.