Kent · Fire damper testing
Fire Damper Testing in Clement Street
Fire damper drop testing and smoke damper testing, with a record for each damper in Clement Street, surveyed first and signed off with a written report and photos. Ask us for a fixed quote.
- Fire dampers that fail to drop shut
- Dust or grease build-up on damper blades
- Smoke dampers that need testing through their controls
How it works
Protection comes first: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. The work on site takes anything from a couple of hours for a handful of dampers to a full day for a large building, and we clear up before we go. If the van will struggle with a lane or gateway near Clement Street, let us know and we will plan around it.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- Each damper is located and reached through its access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- Dampers that close fully are reset and left open.
- We report on every damper, with faults and suggested remedials set out.
How to prepare
- Tell us where we can park and unload
- Arrange a key holder or contact on site
- Mention any locked doors, roof access or ceiling voids
Get a fixed quote
Every quote begins with a look at the system, from your photos and details or, where that isn’t enough, a survey on site. Then we send a fixed price, before any work starts.
Related advice
Fire damper testing for kitchens and businesses in Clement Street
BESA guidance is that fire dampers should be tested by a competent person when they’re installed and at least annually after that. Spring-operated dampers need testing every year as a minimum. Our job is to do the testing and hand you the paperwork that shows it. Typical jobs include motorised smoke dampers due for testing and fire dampers nobody can get to, across motorised smoke dampers, offices and schools and wall and floor dampers.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, and the dampers in them are easily forgotten. The first visit starts by locating each damper.
The report is your system’s health record: dated, with pictures, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Place
- Clement Street (BR8)
- Region
- Kent
- Reporting
- Report and photos after the visit
- Quotes
- A fixed quote up front
- Hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Also near Clement Street
More services for Clement Street
What fire damper testing cannot fix
Fire damper testing cannot fix everything, and we’d rather say so up front. It does not solve:
- Signing off a building’s overall fire safety
- Ductwork crossing a fire wall with no damper fitted
- Gaps in the wall or floor around the damper
If you’re not sure, just call us on 0345 646 2711, or send details by email and we’ll give you a straight answer before booking.
What we work on in Clement Street
- Riser dampers
- Fusible link fire dampers
- Offices and schools
- Wall and floor dampers
- Hospitals and care homes
- Motorised smoke dampers
FAQs for Clement Street
Which fire authority looks after Clement Street?
It’s Kent Fire and Rescue Service, which covers Clement Street. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Can fire dampers in schools around Clement Street be tested in the holidays?
Yes. Half-terms and the summer break are the natural time for school work. With about 7 schools and colleges on the FSA’s register within roughly a mile and a half of Clement Street, it pays to plan holiday dates ahead. Send us your term dates when you ring 0345 646 2711, or email photos, and we’ll fit the work in.
What information do you need?
Just the basics: the address, the site type, your opening hours and how we reach the system. Photos and the last report help too. After that, simply call 0345 646 2711 or email us.
Which sectors do you work in?
Any commercial site with kitchens or ventilation, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.
Do you offer emergency callouts?
Yes. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we’ll advise on what to do next.
Do you offer maintenance contracts?
Yes. Plans on a 3, 6 or 12-monthly cycle are available, depending on what the system needs.
Who is responsible for fire damper testing?
It sits with the building’s responsible person. Depending on the building, that can be the employer, owner, landlord or whoever manages it. Our part is the testing and the records that show it’s been done.
Is a quote from photos possible?
Often, yes. With good photos, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.
For landlords and multi-site operators
Keeping records across a portfolio is half the battle. Each visit ends with a dated report and photos, ready to show insurers, fire officers or EHOs.
Whether it’s one building or many, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with photos.
Fire damper testing in Clement Street: local notes
The FSA’s food hygiene register lists about 7 schools, colleges and universities and about 16 hospitals, care homes and childcare premises with registered kitchens or food service within 1.5 miles or so of the middle of Clement Street. Buildings like these often have ducted ventilation, and wherever a duct crosses a fire-resisting wall or floor there should be a damper, tested at least once a year. For Clement Street, the closest hospital is West Hill Hospital, roughly 2.2 miles north. Healthcare buildings rely on fire compartments to protect people who cannot easily move, and dampers keep those compartments sealed. The fire and rescue service for Clement Street is Kent Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
If you manage an older building converted to a hotel or venue, like many historic houses in the area (Hall Place and Gardens is about 3.3 miles north-west), finding every damper is the first job. A school like Sutton-At-Hone Church of England Primary School can have any dampers tested over half-term without disturbing lessons.
Clement Street is about 2 miles south of Dartford, in Kent. From the centre of Clement Street to the outskirts, we cover fire damper testing for every kind of premises, from a single unit to a large public building. Our Kent coverage runs to 922 places, and Clement Street is one of them. We also work in London, around 14 miles away.
Our technicians cover all of BR8 for fire damper testing and the roads nearby. Nearby, we also carry out fire damper testing in Hawley (1 mile north-east), Sutton at Hone (1 mile east), South Darenth (2 miles south-east), Darenth (2 miles east) and St Margarets (2 miles east). Within a short drive, we also cover Sevenoaks (9 miles south), Gravesend (7 miles east), Tonbridge (15 miles south), Northfleet (6 miles east), Kings Hill (13 miles south-east) and Swanscombe (4 miles north-east).
What’s near Clement Street
Typical jobs here are in premises near Dartford Heath, Wilmington Academy and The Plough pub, among other places. The closest station to Clement Street is Farningham Road station, about 1.3 miles south-east. Nearby you will also find Eynsford Castle (3 miles south) and West Hill Hospital (2.2 miles north). For a walk, there’s Wansunt Pit.
In-house cleaning or a specialist?
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you cannot see still need a specialist at the right interval.
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
How we price fire damper testing
The diagnosis comes before the price. The main factors are:
- How easy every part is to reach
- Travel, parking and unloading
- The condition we find in the survey
- One-off work versus a regular cycle
We do not list prices on the website, because each job is priced on what it involves. For a fixed quote, give us a ring on 0345 646 2711 or send us an email, and we will talk you through it.
Asking for a quote
Many jobs can be priced from photos and some basics. Useful things to send:
- Any access panels or hatches you can see
- Problems your staff have spotted
- The site address and the type of premises
- Your opening hours and when the area is out of use
Need a price for fire damper testing? Please call 0345 646 2711 or drop us a line with a few details about the site. We will talk you through the work and send you a fixed quote before you commit to anything.
Do you need fire damper testing in Clement Street?
Other trades work around dampers all the time. A cable run through the blade path, a knocked link or a wedged blade is enough to stop a damper closing.
What we are most often called out for:
- Fire dampers with no recent test record
- Dust or grease build-up on damper blades
- Damper actions from a fire risk assessment
- Rusted damper blades and springs
Healthcare buildings such as West Hill Hospital (about 2.2 miles north) rely on fire compartments, and the dampers in them need testing at least annually.
What to look for in a quote
- Whether the quote is based on a survey or pictures
- How they set the interval to the next visit
- Proof of accreditation you can verify
- What hours they’ll be on site
Aftercare tips
A little care between visits keeps the system in better shape. Our advice:
- Update the register when ductwork changes
- Get remedials done soon after a failed test
- Tell contractors where dampers are before they start work
- Report leaks or condensation near ductwork quickly
If we couldn’t get to a damper, the report says so and why, for example a missing panel or a covered hatch. Access panels can be fitted so those dampers are tested on the next visit.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.