Surrey · Fire damper testing
Fire Damper Testing in Burntcommon
Fire damper testing for commercial sites in Burntcommon and across Surrey. CHAS, SafeContractor and ISO 9001, and fully insured.
- Dampers affected by leaks or condensation
- Smoke dampers with no recent test
- Dampers overdue for their annual drop test
How we handle fire damper testing in Burntcommon
Not every damper relies on heat. A smoke damper is driven by a motor and responds to signals from its controls, so we test them by operating them through those controls and checking that each blade moves fully and returns. If you’re dealing with fire dampers nobody can get to and gaps in the fire damper test log, we can help, from fusible link fire dampers, riser dampers and motorised smoke dampers onwards.
For a building in or near Burntcommon, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
Good records are part of the job. Each visit is written up with pictures, listing what was done, anything we couldn’t reach and when the next visit is due. Keep it with your fire safety records so it’s ready for an insurer, fire officer or EHO.
- Location
- Burntcommon (GU23)
- Region
- Surrey
- Reporting
- Written report with pictures
- Price
- A fixed quote up front
- When we work
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
Burntcommon questions
Can a school’s dampers in Burntcommon be tested out of term time?
Yes, out-of-term visits are normal for schools. Food Standards Agency records list about 2 schools, colleges and universities with registered kitchens within about a mile and a half of Burntcommon. You can ring 0345 646 2711 or use the quote form with the dates the site is empty.
Do you cover smaller places like Burntcommon?
Yes, Burntcommon is part of our area, however small the site. A survey first, from photos or a visit, means we arrive with the right kit.
Which sectors do you work in?
Any commercial site with kitchens or ventilation, from a single café to a large school. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.
Can we book visits on a schedule?
Yes. Send details of the systems and how they’re used, and we will suggest a schedule and quote for it.
Will we have to shut during the visit?
Not typically. Visits are timed for when the area is closed, such as overnight or at a weekend, so the site can carry on as normal.
Where does the waste go?
Waste is contained during the work and removed when we leave, from grease and debris to used cleaning water. We don’t leave it behind.
How often should fire dampers be tested?
BESA guidance calls for testing by a competent person at least once a year. A test on completion of installation comes first.
How much notice do you need?
That depends on the slot you want and the size of the job. Mention your preferred dates with your enquiry, and if it’s an emergency, call us any time.
What a clean won’t put right
To be straight with you, some problems need a different fix:
- Fire risk assessments, which need a fire risk assessor
- Approving the building’s fire strategy
- Gaps in the wall or floor around the damper
Not sure which it is? You can phone us on 0345 646 2711, or send details by email and we will tell you honestly before booking.
What the work covers
- Wall and floor dampers
- Motorised smoke dampers
- Offices and schools
- Riser dampers
- Hospitals and care homes
- Fusible link fire dampers
What staff can safely do
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, which is where we come in.
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
Multi-site and managed buildings
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we’ll come back with a fixed quote.
Keeping records across a portfolio is half the battle. Every visit ends with a dated report and photos, so you can show an insurer or inspector what was done at each site.
Nearby places to Burntcommon
Also in Burntcommon
How the visit works
Our technicians bring everything the work needs, from protective sheeting to tools and access equipment. You only need to give us clear access and switch off what needs to be off. The visit takes a few hours for a single floor, with bigger buildings phased over more than one visit. Photos of the system and how to reach it help us plan a visit to Burntcommon.
- Before the visit, we agree access, timings and any areas with restrictions.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
Preparing for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Dig out any earlier paperwork for the system
- Let us know when the site is closed or quiet
Ask for a quote
There’s no standard price list, because every site is different. Instead, we look at your site first, from pictures or a survey, and then give you a fixed quote. To start, call us on 0345 646 2711 or send us an email.
Read more
Keeping the system healthy
Results last longer with the right care. We suggest:
- Keep damper test reports with the fire safety log
- Book the next test before the year runs out
- Update the register when ductwork changes
- Keep ceiling hatches and duct panels easy to open
After testing, you get a report listing each of the fire and smoke dampers we tested, with its location and its result. File it with your fire safety log so it’s to hand for assessors and insurers.
Make sure every damper can be reached. Where there’s no hatch, an access panel makes testing possible ahead of the next visit.
Part by part
Smoke dampers
Testing smoke dampers sometimes needs input from whoever looks after the control system. We plan that with you before the visit.
Access panels
If we can’t reach a damper, it goes on the report as inaccessible. Fitting a panel means it can be tested on the next visit.
Fixed quotes for fire damper testing in Burntcommon
The diagnosis comes before the price. The main factors are:
- Site rules, permits and inductions
- The number of sites or systems
- Travel, parking and unloading
- One-off work versus a regular cycle
Every site is different, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
What to send for a quote
To speed up the quote, send us:
- Wide pictures of the system and the area around it
- When the site is open and when it’s quiet
- Detail shots of panels, filters and grilles
- The paperwork from the last visit, if you have it
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before we start.
Fire damper testing in Burntcommon: local notes
About 23 miles out from central London, Burntcommon is part of the South East area we work across. The visit is fixed around your opening hours, not ours. Burntcommon sits within the area of Surrey Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
The nearest hospital, Woking Community Hospital, is about 2.9 miles north-west; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly. If you manage a historic building in the area (Clandon Park is about 2.4 miles south), dampers fitted during conversions can be hard to reach and need recording. School buildings such as Send CofE Primary School are typically tested in the holidays, wherever they have dampers.
Burntcommon is about 3 miles south-east of Woking, in Surrey. Burntcommon gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with pictures. 395 places in Surrey are on our list, large and small.
We work across the GU23 postcode area for fire damper testing and the streets around it. You’ll find streets such as Linden Way, Beech Drive and The Copse, and we cover them all for fire damper testing. Neighbouring places we cover for fire damper testing include Send Marsh (1 mile north), Send (1 mile west), West Clandon (1 mile south), Sutton Green (2 miles west) and Burpham (2 miles south-west). Further out, we also cover Guildford (4 miles south-west), Woking (3 miles north-west), Camberley (10 miles west), Epsom (11 miles east), Redhill (15 miles east) and Farnham (13 miles south-west).
Landmarks near Burntcommon
We work in commercial kitchens and buildings around Ripley Court School, The Jovial Sailor pub and St John the Baptist Catholic Comprehensive School and the streets around them. For rail, the closest station is Clandon station, about 1.5 miles south of the centre. A little further out are Guildford Castle (4.4 miles south-west) and Send and Ripley History Society Museum (1.2 miles north-east). The countryside around Burntcommon includes St Martha's Hill and Boldermere Lake.