West Berkshire · Fire damper testing
Fire Damper Testing in Burnt Hill
One call covers fire damper testing in Burnt Hill, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Motorised smoke dampers due for testing
- Fire dampers with no recent test record
- Dampers clogged with dust or grease
Fire damper testing in Burnt Hill
Plenty of buildings have dampers nobody has looked at since they were fitted. Ceilings have gone up, access panels have been covered or lost, and the records have gone missing. We find what we can, test what we can reach and list anything we can’t get to, so you know where the gaps are. Typical jobs include dampers that can’t be reached without an access panel and dampers flagged on a fire risk assessment, on offices and schools, motorised smoke dampers and wall and floor dampers.
For a building in or near Burnt Hill, the visit is planned ahead, with access agreed in advance, and the test itself is the same as in any city building.
Every visit ends with a written report and pictures, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Location
- Burnt Hill (RG18)
- Wider area
- West Berkshire
- Paperwork
- Report and photos after the visit
- Quotes
- Fixed quote, typically within a working day
- When we work
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Multi-site and managed buildings
We regularly work with managing agents. Send the address, what’s needed and how access works and we will come back with a fixed quote.
For anyone managing more than one site, we can schedule visits across all of them on one quote. Every building has its own written report, so each one has its own record.
Looking after it afterwards
Here’s the after-treatment advice, short and simple:
- Book the next test before the year runs out
- Act on failed dampers rather than leaving them on file
- Tell contractors where dampers are before they start work
- Make sure access panels stay clear and usable
Share the results with your fire risk assessor so their assessment matches what was found. Faults on the report are worth closing off quickly.
Keep a damper register: where each damper is, what kind it is and when it was last tested. It stops dampers getting lost as the building changes.
What we’re called out for in Burnt Hill
Dampers are hidden above ceilings, inside risers and behind boxing. If there’s no hatch to reach them, they slip off everyone’s list, and anything nobody can get to goes untested.
The symptoms we are asked about most are:
- Fire dampers that fail to drop shut
- Dampers that can’t be reached without an access panel
- Smoke dampers that need testing through their controls
- Missing or out-of-date damper records
For schools like Yattendon C.E. Primary School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
What your quote should include
- Exactly which parts of the system are covered
- Whether VAT is included
- What insurance they carry
- Whether the figure could change on the day
What we do, step by step
The visit has three parts: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, and the sign-off is a written report with photos. The middle part takes longest, and that takes anything from a couple of hours for a handful of dampers to a full day for a large building. A quick note on how to find the site and where to park makes a visit to Burnt Hill run smoothly.
- We start with whatever records exist: registers, drawings or old reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- We reset every damper that passes and check it’s left open.
- We report on every damper, with faults and suggested remedials set out.
Preparing for the visit
- Arrange a key holder or contact on site
- Let us know about parking and loading
- Find the previous report, if there is one
Ask for a quote
If you need fire damper testing in Burnt Hill, ring 0345 646 2711, or email photos. Let us know the site type and the opening hours, plus photos or the previous report if they’re to hand. A fixed quote usually follows within one working day.
Read more
In-house cleaning or a specialist?
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that’s where we come in.
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
Nearby places to Burnt Hill
More services for Burnt Hill
Common questions in Burnt Hill
Do you work overnight in Burnt Hill?
Yes, evening, overnight and weekend work is normal for us. That way a site in Burnt Hill doesn’t have to lose a day’s trading. Your opening times are the first thing we ask for.
Is Burnt Hill within the area you cover?
Yes. Villages and rural sites across the South East are part of our work, Burnt Hill included. Just mention lanes, gates or anything else about the site when you book.
How long will damper testing take?
Typically the work takes a few hours for a single floor, with bigger buildings phased over more than one visit. It comes down mainly to how many dampers there are and how easy they are to get to.
Is TR19 cleaning required by law?
No. TR19® itself is not law; it’s a BESA specification. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
Do we need to close while you work?
Not normally. Out-of-hours visits keep the disruption down. Bigger sites can be done in stages so parts stay in use.
What if parts of the system cannot be reached?
We never leave them off the paperwork. The report says which parts couldn’t be reached and why, and we can quote to improve the access.
What paperwork do we get after testing?
What you receive is a written report of each test for every damper on the visit. Failures are set out with the remedials we’d suggest.
How do you keep the site clean during the work?
With sheeting and covers, before anything else happens. The work is kept contained and clean down when we finish.
What happens if it’s left?
Putting testing off does not change whether the dampers will close; it just means you don’t know. BESA guidance is to test at least annually, so a missed year leaves a gap in the record too. In a small place like Burnt Hill, a system that fails can take a site out of use.
We don’t list prices on the website, because each job is priced on what it involves. For a fixed quote, call us on 0345 646 2711 or drop us a line, and we will explain what it covers.
What you get with us
- A written report with photos after each visit
- A single point of contact for sites across the South East and London
- We are fully insured
- Out-of-hours work and a 24/7 emergency line
See how cleaning jobs are priced or how to check a contractor.
How we price fire damper testing
Every site gets its own quote. These are the things that affect it:
- Parking and loading at the site
- When the work can happen, such as evenings, overnight or weekends
- What state the system is in
- One-off work versus a regular cycle
What you pay depends on the size of the system, the condition it’s in and how easy it is to reach. You get a fixed price before work begins, so you know where you stand.
Asking for a quote
When you contact us, these details help:
- Wide photos of the system and the area around it
- Any access panels or hatches you can see
- Where the site is and what kind of site it is
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
Want a quote for fire damper testing? Please call 0345 646 2711, or email photos with a few details about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
Burnt Hill buildings and fire safety
Royal Berkshire Fire and Rescue Service covers Burnt Hill. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers. Burnt Hill, about 47 miles from central London, is within our usual area. A survey and a fixed quote come first, then the visit at a time that suits you.
Historic houses near Burnt Hill, with Basildon Park about 3.5 miles north-east, are a reminder that older buildings can hold dampers in unexpected places.
Burnt Hill is about 5 miles north-east of Thatcham, in West Berkshire. Every kind of commercial site in Burnt Hill, we can take on fire damper testing. We can work out of hours so the site keeps running. Burnt Hill is one of 155 towns, villages and districts in West Berkshire we cover for fire damper testing. For sites nearby, see our Reading page (9 miles or so).
Every address in RG18 is within our area for fire damper testing, from the main roads to the quietest streets. We also cover the places around Burnt Hill: Stubbles (1 mile north), Stanford Dingley (2 miles south), Ashampstead (2 miles north), Ashampstead Green (2 miles north) and Upper Basildon (2 miles north-east). Larger places within reach include Newbury (8 miles south-west), Thatcham (5 miles south-west), Burghfield Common (7 miles south-east), Speenhamland (7 miles south-west), Hungerford (15 miles west) and Spencers Wood (10 miles south-east).
Near you in Burnt Hill
The nearest railway station is Pangbourne station, roughly 4.2 miles east of the centre. Well-known places in the area include Yattendon Castle (1.1 miles west). Open spaces near Burnt Hill include Hartslock.