Hampshire · Fire damper testing
Fire damper inspection in Burley Street
Specialist fire damper testing for Burley Street: diagnosis first, then a fixed quote, the work and a report with pictures. Ask us for a fixed quote.
- Corroded dampers in damp risers and plant rooms
- Fire dampers that haven’t been tested for over a year
- Dampers clogged with dust or grease
Questions from Burley Street
Will you come out to Burley Street?
Yes. Burley Street is within the area we cover across London and the South East. Just mention lanes, gates or anything else about the site when you book.
Can the work in Burley Street be done at night or at weekends?
Yes, out-of-hours work is a big part of what we do. That way a site in Burley Street doesn’t have to lose a day’s trading. Let us know the hours you’re closed and we’ll book within them.
Where does the waste go?
Waste is contained during the work and removed when we leave, from grease and debris to used cleaning water. We do not leave it behind.
What does fire damper testing cost?
It depends on the site, so we quote each one individually. To get one, phone us on 0345 646 2711 or drop us a line and tell us about the site and its opening hours.
Who is responsible for fire damper testing?
The duty falls on the responsible person for the premises. That is often the employer, owner, landlord, facilities manager or managing agent. We carry out the testing and give them the records.
Can you look after several sites?
Yes. One number covers all your sites in our area, with visits on a regular schedule.
How much notice should we give?
Earlier is better, particularly for night and weekend visits. We normally quote within one working day, and there’s a 24/7 line for emergencies.
Do you have insurance?
Yes, we are fully insured. We also hold CHAS and SafeContractor for clients who vet their contractors.
About our fire damper testing in Burley Street
Each damper we test gets a location, a result and a note of its condition. Passes are reset and left ready to work, and any that fail are listed with the reason. You end up with a clear record to keep with your fire safety documents. We’re often asked to deal with blades that jam part-way when released and dust or grease build-up on damper blades, across hospitals and care homes, wall and floor dampers and offices and schools.
In a village or hamlet like Burley Street, there may be only a few buildings with fire dampers. Each damper still needs testing at least once a year.
Every visit ends with a written report and photos, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Place
- Burley Street (BH24)
- Wider area
- Hampshire
- Paperwork
- Photo report after every visit
- Quote
- A fixed price before any work starts
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Keeping the system healthy
To keep the system working properly between visits:
- Keep damper test reports with the fire safety log
- Brief other trades about dampers in ceilings and risers
- Get remedials done soon after a failed test
- Report leaks or condensation near ductwork quickly
Failed dampers are set out separately, each with the fault we found, and we can quote for remedials. Once the work is done, the damper is tested again and the record updated.
Keep a damper register: where each damper is, what kind it is and when it was last tested. It means nothing gets forgotten when staff or contractors change.
For landlords and multi-site operators
Keeping records across a portfolio is half the battle. Each visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party and send the paperwork to whoever needs it.
What fire damper testing can’t fix
In fairness, some problems need a different fix:
- Fire risk assessments, which need a fire risk assessor
- Sign-off of the whole building’s fire safety
- Fire-stopping gaps around the duct where it passes through the wall
If you are not sure, just call us on 0345 646 2711, or send details by email and we’ll give you a straight answer before you book.
What the work covers
- Riser dampers
- Fusible link fire dampers
- Offices and schools
- Hospitals and care homes
- Wall and floor dampers
- Motorised smoke dampers
Do you need fire damper testing in Burley Street?
Links and springs age like any other part. Damaged or painted links and weak springs mean the blade may stop short, which only shows up when the damper is dropped.
It’s time to book a visit if you see:
- Dirty dampers that may not close
- Damper actions from a fire risk assessment
- Missing or out-of-date damper records
- Dampers overdue for their annual drop test
Avon Tyrrell House, about 2.7 miles south-west, is one of the historic houses near Burley Street, and older buildings converted to new uses often have ventilation added later.
What your quote should include
- Whether the work can be done while the site is closed
- Whether a survey comes first
- Whether the quote shows VAT
- Proof of insurance
Fire damper testing around Burley Street
Food Standards Agency records list about 3 hotels and guest houses registered as food businesses in and around Burley Street, up to about a mile and a half out. If any of them has ducted ventilation, its dampers need an annual drop test at least. Burley Street sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
If you manage a school site such as Burley Primary School, any fire dampers can be tested in the holidays.
Burley Street is in Hampshire. Whether your site is in the middle of Burley Street or further out, fire damper testing is available to all kinds of commercial premises, from a single unit to a large public building. Our Hampshire coverage runs to 683 places, and Burley Street is one of them. You can also see our page for Southampton, roughly 15 miles from Burley Street.
Postcode districts we cover here for fire damper testing: BH24. That includes premises on Tyrells Lane, Ringwood Road and Forest Road and nearby roads. We also cover the places around Burley Street: Burley (1 mile south-east), Foulford (2 miles north-west), Forest Corner (2 miles north-west), Shobley (2 miles north-west) and Bagnum (2 miles south-west). Larger places within reach include Totton (11 miles north-east), Lymington (9 miles south-east), Romsey (15 miles north-east), Hythe (14 miles east), New Milton (6 miles south) and Ringwood (3 miles west).
Near you in Burley Street
Locally, jobs take us to businesses close to The Queen's Head pub and the streets around them. The countryside around Burley Street includes Linbrook Lake and Blashford Lakes.
What happens on the day
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Anything that needs to be off for the work is switched off and left to cool before we start, and the area around the work is covered and protected. On site, it takes from an hour or two in a small building to several visits on a large estate. For a village or hamlet like Burley Street, tell us about narrow lanes, gates and parking when you book.
- We start with whatever records exist: registers, drawings or old reports.
- We find every damper and open it up through the access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- Dampers that close fully are reset and left open.
- We report on every damper, with faults and suggested remedials set out.
Before we arrive
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Let us know when the site is closed or quiet
- Clear loose items from the work area
Get a fixed quote
To get a fixed quote, call us on 0345 646 2711 or send us an email and tell us the type of site, your opening hours and roughly what the system looks like. A few pictures and your last certificate or report help a lot. We usually come back within one working day.
Related advice
Staff cleaning versus specialist work
Staff cleaning and specialist work are not the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Keep a record of what your team does. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, alongside our reports.
What affects the cost of fire damper testing
Before we fix a price, we need to know a few things. We check:
- Access, including roofs, risers and ceiling voids
- The size of the system
- A single visit or a regular plan
- Site requirements such as sign-in and permits
You won’t find a price list here, because the cost depends on the site in front of us. Call for a fixed quote, and we will talk you through it.
Asking for a quote
The more you tell us, the more accurate the quote. With your enquiry, please include:
- Your opening hours and when the area is out of use
- Any symptoms, from odd noises to smells or leaks
- Your last certificate, test record or report
- The roof, plant room or outside wall the system runs to
We don’t publish a price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To start, phone us on 0345 646 2711 or use the quote form.