Kent · Fire damper testing
Fire and smoke damper testing in Broom Street
Need fire damper testing in Broom Street? We survey first, send you a fixed quote and work around your opening hours, finishing with a written report and pictures.
- Motorised smoke dampers due for testing
- Fire dampers that fail to drop shut
- Fire damper items raised by an assessor
Fire damper testing in Broom Street
Some dampers haven’t been tested since the day they went in. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We locate and test the dampers we can reach and record the ones we cannot, so you know where the gaps are. If you are dealing with smoke dampers that need testing through their controls and blades that jam part-way when released, we can help.
Somewhere as small as Broom Street, fire dampers are usually found in a school, a care home, a hotel or a converted building, wherever there is one. Each damper still needs testing at least once a year.
For insurers and inspectors, the record counts. So every job comes with a written report and photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Location
- Broom Street (ME13)
- Region
- Kent
- Paperwork
- Written report with pictures
- Price
- Fixed quote, typically within a working day
- Hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
For landlords and multi-site operators
Records are where multi-site compliance often slips. Every visit ends with a dated report and pictures, so you can show an insurer or inspector what was done at each site.
When the building owner and the occupier are different, the lease normally sets out who maintains what. We can quote either party, and the report can go to both.
Also near Broom Street
Other services in Broom Street
Why it’s worth doing now in Broom Street
Faults found early are often simpler to put right. Left for years, corrosion and build-up can turn it into a full damper replacement. Planning a trip to Broom Street ahead is easier for everyone than a rushed one.
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we’ll go through it with you.
Why us?
- Photo reports with every job
- Fully insured
- One contact for all your sites in London and the South East
- CHAS and SafeContractor accredited, with ISO 9001
Take a look at our cost guide and our accreditations.
Between visits
After the visit, a few habits help the work last:
- Never wedge or tie a damper open
- Diary the annual test well ahead
- Fix water leaks in plant rooms and risers promptly
- Keep the damper register up to date after any building work
If we couldn’t get to a damper, the report says so and why, for example a missing panel or a covered hatch. We can fit access panels so they can be tested next time.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
What fire damper testing looks like in Broom Street
Sea air reaches Broom Street, which sits within about 2 miles of the coast. A damper that has corroded can stay open when it should close, which is why coastal sites are worth testing carefully. Kent Fire and Rescue Service covers Broom Street. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers. Whitstable and Tankerton Hospital is the nearest hospital, about 5.6 miles north-east of Broom Street. Healthcare buildings rely on fire compartments to protect people who cannot easily move, and dampers keep those compartments sealed.
Healthcare buildings such as Whitstable and Tankerton Hospital (about 5.6 miles north-east) rely on fire compartments, and the dampers in them need testing at least annually.
Broom Street is about 2 miles east of Faversham, in Kent. We carry out fire damper testing for commercial premises of every kind in Broom Street and the rest of Kent. Broom Street is one of 922 towns, villages and districts in Kent where we work for commercial clients. There’s also a page for Maidstone, roughly 18 miles from Broom Street.
All of ME13 is within our area for fire damper testing, from the main roads to the quietest streets. If your site is just outside Broom Street, we cover Graveney (1 mile south-east), Culmers (1 mile south-east), Goodnestone (1 mile south), Slutshole (2 miles south-east) and Hernhill (2 miles south-east). Larger places within reach include Ashford (13 miles south), Canterbury (7 miles south-east), Sittingbourne (9 miles west), Whitstable (5 miles north-east), Herne Bay (9 miles east) and Minster (9 miles north-west).
Near you in Broom Street
Typical jobs here are in premises near South Swale and Queen Elizabeth's Grammar School and the streets around them. The closest station to Broom Street is Faversham station, roughly 2.1 miles south-west of the centre. Well-known places in the area include Whitstable and Tankerton Hospital (5.6 miles north-east).
What your team can do, and what needs us
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, and that’s where we come in.
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
What we are called out for in Broom Street
In most buildings, Broom Street included, dampers are out of sight in ceiling voids, risers and service shafts. If there’s no hatch to reach them, they slip off everyone’s list, and one that cannot be reached can’t be tested.
Most sites get in touch when they notice one of these:
- Dampers hidden with no access panel or hatch
- Dampers that stick or will not close fully
- Smoke dampers that need testing through their controls
- Dampers overdue for their annual drop test
School buildings such as Graveney Primary School are normally tested in the holidays, wherever they have dampers.
What to look for in a quote
- When the next visit should be, and why
- Whether a survey comes first
- If the quote is a fixed price or an estimate
- How areas they cannot reach will be recorded
What affects the quote in Broom Street
Before we fix a price, we need to know a few things. We look at:
- How many systems or sites are involved
- Site rules, permits and inductions
- The scale of the work
- A single visit or a regular plan
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all play a part.
Helping us quote
Photos and a few facts are often enough to price the work. Useful things to send:
- When the site is open and when it’s quiet
- The roof, plant room or outside wall the system runs to
- Wide pictures of the system and the area around it
- Your last certificate, test record or report
Want a quote for fire damper testing? Please call 0345 646 2711 or use the quote form and tell us about the site. We will explain what we’d do and send a fixed quote before anything is booked.
How it works
There are three stages on the day: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, and the sign-off is a written report with photos. Most of the time goes on the work itself, and that takes anything from a couple of hours for a handful of dampers to a full day for a large building. Pictures of the system and its access let us plan the work in Broom Street before we set off.
- We go through the damper schedule and any previous faults.
- Each damper is found and checked for access.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Passes are reset and any failures recorded with the reason.
- We report the results and offer remedials on failed dampers.
Preparing for the visit
- Move anything stored near the system
- Let us know about parking and loading
- Mention any locked doors, roof access or ceiling voids
Ask for a quote
To get a fixed quote, ring 0345 646 2711 or send us an email with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. We usually come back within one working day.
Advice
Common questions in Broom Street
Do you cover smaller places like Broom Street?
Yes, Broom Street is part of our area, however small the site. Just mention lanes, gates or anything else about the site when you book.
Can a school’s dampers in Broom Street be tested out of term time?
Yes, and it’s the easiest time to do it. The FSA’s register shows about 2 schools and colleges with food registrations within roughly a mile and a half of Broom Street. Booking early in the term gives the best choice of holiday dates.
Can one contract cover all our sites?
Yes. Tell us the addresses and what each needs and we will quote them together.
What do you do to protect the area?
With sheeting and covers, before anything else happens. The work is kept contained and clean down when we finish.
How long will damper testing take?
Expect it to take a few hours for a single floor, with bigger buildings phased over more than one visit. Access is the biggest factor, so we’ll confirm the time when we quote.
Can testing be done without disrupting the building?
Yes, the visit is arranged to suit the site. We can work evenings, overnight or at weekends if daytime testing would get in the way.
What is TR19?
TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
Is a quote from pictures possible?
Yes, if we can see what we need. If not, a site survey comes first, then a fixed quote.