Hampshire · Fire damper testing
Fire Damper Testing in Blashford
For fire damper testing in Blashford, one call is all it takes, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Dampers overdue for their annual drop test
- Dust or grease build-up on damper blades
- Damper actions from a fire risk assessment
Fire damper testing in Blashford
For every damper, we record where it is, whether it passed and the state it’s in. Dampers that pass are reset and left open, ready to operate, and any that fail are listed with the reason. That record belongs with the building’s fire safety paperwork. If you are dealing with gaps in the fire damper test log and fire dampers with no recent test record, we can put it right, from offices and schools, riser dampers and hospitals and care homes onwards.
For a building in or near Blashford, the visit is planned ahead, with access agreed in advance, and the test itself is the same as in any city building.
Think of the report as the system’s health record: dated, with pictures, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal and sits alongside the report.
- Place
- Blashford (BH24)
- Region
- Hampshire
- Records
- Report and photos after the visit
- Quote
- Fixed quote, normally within a working day
- When we work
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
What staff can safely do
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, they should report it rather than try to fix it. We can diagnose it and quote.
Honest limits
In fairness, some problems need a different fix:
- Fire alarm or control system faults behind a smoke damper
- Missing dampers that a designer needs to specify
- Holes around ductwork in fire-resisting walls
If you are not sure, just call 0345 646 2711, or email photos and we will give you a straight answer before booking.
Where we work
- Motorised smoke dampers
- Fusible link fire dampers
- Offices and schools
- Hospitals and care homes
- Wall and floor dampers
- Riser dampers
How the job changes from site to site
Ceiling voids and risers
Plant rooms and risers can be damp, which leads to corrosion. We note any rust or water damage on the report so it can be dealt with.
Schools, hospitals and care homes
In hospitals and care homes, people are there day and night. The sequence of testing is agreed with staff to keep disruption to a minimum.
Common problems we fix in Blashford
Over the life of a building, owners, tenants and contractors come and go, and damper records often get lost along the way. Without a register, nobody knows how many dampers there are or when they were last tested.
What we are most often called out for:
- Dampers that stick or will not close fully
- Smoke dampers that need testing through their controls
- Rusted damper blades and springs
- Dampers overdue for their annual drop test
School buildings such as Poulner Junior School are typically tested in the holidays, wherever they have dampers.
What to look for in a quote
- What records you’ll receive afterwards
- Whether they’re fully insured
- How VAT is shown on the quote
- How areas they can’t reach will be recorded
How it works
Your trading hours come first. We book the visit for a time the area is closed, whether that’s an evening, overnight or a weekend. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the work takes a few hours for a single floor, with bigger buildings phased over more than one visit. Somewhere like Blashford, lanes, gates and parking are worth mentioning in advance.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- Each damper is located and reached through its access panel.
- We release each fire damper blade and operate smoke dampers from their controls.
- We reset every damper that passes and check it’s left open.
- We report on every damper, with faults and suggested remedials set out.
Getting ready for the visit
- Make sure someone can let us in and lock up afterwards
- Clear loose items from the work area
- Mention any sign-in, permit or induction we need
Get a fixed quote
Getting a quote doesn’t take long. Send a few details and photos, and we normally reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Related advice
How we price fire damper testing
The survey tells us what the work involves. We look at:
- Site requirements such as sign-in and permits
- Whether we need access equipment or extra panels
- The times the site is available
- The condition of the system
No two sites are the same, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all make a difference.
What we need to know
A few details help us quote accurately. With your enquiry, please include:
- Any symptoms, from odd noises to smells or leaks
- The roof, plant room or outside wall the system runs to
- Photos showing the whole system and its surroundings
- Any previous report or certificate
Every quote begins with a look at the system, from your photos and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work so you know the cost before we start.
Fire dampers in Blashford buildings
The FSA’s food hygiene register lists about 4 schools, colleges and universities and about 8 care, childcare and hospital premises with registered kitchens or food service within roughly a mile and a half of the centre of Blashford. Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. Fire safety in Blashford falls to Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers. The nearest hospital to Blashford is St Leonard's Hospital, about 4.5 miles south-west. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.
Historic houses near Blashford, with Avon Tyrrell House about 4.7 miles south-east, are a reminder that older buildings can hold dampers in unexpected places. St Leonard's Hospital, about 4.5 miles south-west of Blashford, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
Blashford is in Hampshire. For fire damper testing in and around Blashford, it’s easy to get a fixed quote: please ring 0345 646 2711 or use the quote form. Our area covers London and the South East, including Blashford. Our area takes in 683 places across Hampshire, large and small. For sites nearby, see our Southampton page, about 17 miles away.
Fire damper testing in BH24 is surveyed, quoted and booked the same way as anywhere else. Whether your site is on Snails Lane, Ivy Lane and Woolmer Lane or anywhere close by, our technicians can take on the work. We also cover the places around Blashford: Ellingham (1 mile north-west), Rockford (1 mile north-east), Poulner (1 mile south-east), Highwood (1 mile east) and Ringwood (1 mile south). Within a short drive, we also cover Totton (13 miles east), Lymington (13 miles south-east), New Milton (9 miles south-east), Barton on Sea (10 miles south-east), Marchwood (15 miles east) and Ashley (9 miles south-east).
What’s near Blashford
Locally, jobs take us to businesses close to Alice Lisle Inn and Ringwood School Academy, among other places. Nearby you will also find St Leonard's Hospital (4.5 miles south-west). Not far away are Blashford Lakes and Linbrook Lake.
Looking after it afterwards
Good habits slow the build-up between visits. A few tips:
- File every damper report where your assessor can find it
- Book the next test before the year runs out
- Keep cables and fixings away from damper blades
- Do not let hatches get painted shut or boarded over
After testing, you get a report listing each of the fire and smoke dampers we tested, with where it is and whether it passed. File it with your fire safety log so it’s to hand for assessors and insurers.
Clean ductwork means less dust and grease reaching the dampers. Duct cleaning and damper testing can be planned side by side.
Also in Blashford
Questions from Blashford
Can the work in Blashford be done at night or at weekends?
Yes, evening, overnight and weekend work is normal for us. It means the site in Blashford keeps running as normal. Your opening times are the first thing we ask for.
Which fire service covers Blashford?
Fire safety enforcement in Blashford is handled by Hampshire and Isle of Wight Fire and Rescue Service. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
Are you accredited?
We hold CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
Is TR19 cleaning required by law?
No. The law sets the duty, and TR19® is the recognised benchmark for meeting it. Under the Fire Safety Order 2005, the responsible person must reduce fire risk, and without records, many insurers may refuse or reduce a claim.
What does fire damper testing cost?
Size, condition, access and working hours all affect the cost. Ask us for a fixed quote and we’ll usually reply within one working day.
How do you deal with dampers that cannot be reached?
The report lists each inaccessible damper and where it is so nothing is quietly missed. Fitting an access panel is the usual fix, and we can quote for it.
Do you test smoke dampers as well?
Yes, alongside fire damper drop testing. Smoke and fire dampers are reported together, with any faults set out clearly.
What if a fire damper will not close?
Failed dampers are reported and we can quote to repair or replace them. Once fixed, the damper is drop tested again and the record updated.