Surrey · Fire damper testing
Fire damper testing in Bishopsgate, Surrey
One call covers fire damper drop testing and smoke damper testing, with a record for each damper in Bishopsgate, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Smoke dampers with no recent test
- Damper actions from a fire risk assessment
- Missing or out-of-date damper records
What happens on the day
At the end of the visit, someone from your team can look over the work with us. Anything we couldn’t reach or that needs attention is pointed out there and then, and the same goes into the written report. All told, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. Seeing the system in pictures first means the trip to Bishopsgate can be planned properly.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- Dampers are located one by one and reached through their access panels.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- We reset every damper that passes and check it’s left open.
- You get a report listing each damper, its result and any remedials needed.
Getting ready for the visit
- Tell us the best time to work, such as after service or at a weekend
- Make sure someone can let us in and lock up afterwards
- Mention any parking or loading restrictions
How to get a quote
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before any work starts.
Advice
Fire damper testing for kitchens and businesses in Bishopsgate
Fire dampers sit inside ductwork where it passes through a fire-resisting wall or floor. A fusible link holds the blade open until heat melts it, and the blade then drops to shut the duct. A drop test shows that the damper still does that when it matters, and we record the result for every damper we test. The work covers wall and floor dampers, riser dampers and offices and schools, and the jobs we see most are rusted damper blades and springs and dampers flagged on a fire risk assessment.
Testing in a small place like Bishopsgate is planned around the journey and access, and the test itself is the same as in any city building.
We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we’re fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Place
- Bishopsgate (TW20)
- Wider area
- Surrey
- Paperwork
- Photo report after each visit
- Quotes
- Fixed quote, normally within a working day
- When we work
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Multi-site and managed buildings
Running several sites is easier with one contractor. We work across London and the South East, so visits at different addresses can be planned together and kept to a regular schedule.
If you look after several sites, we can plan visits across the whole estate and price them together. Each site gets its own report and photos, so records stay tidy.
Looking after it afterwards
How long the results last depends on use and care. We suggest:
- Act on failed dampers rather than leaving them on file
- Keep to at least yearly testing
- Keep the damper register up to date after any building work
- Do not let hatches get painted shut or boarded over
Failed dampers are set out separately, each with the fault we found, and we can quote for remedials. Once the work is done, the damper is tested again and the record updated.
Keeping to at least annual testing stops small faults turning into failed dampers. A blade that’s just starting to stick is easier to deal with than a seized one.
Leave it or put it right?
Until a damper has been dropped, you cannot say whether it works. Testing turns it into a known pass or a known fault, with remedials offered for anything that fails, which is far easier to plan for. Systems in rural buildings are often out of sight and out of mind.
We don’t list prices on the website, because each job is priced on what it involves. For a fixed quote, call 0345 646 2711 or send us an email, and we’ll explain what it covers.
Why book with us
- Full insurance on every job
- In business since 2009
- Survey first, then a fixed quote
- CHAS and SafeContractor accredited, with ISO 9001
Bishopsgate buildings and fire safety
Food Standards Agency data includes about 17 schools, colleges and universities and about 6 hospitals, care homes and childcare premises within about 1.5 miles of central Bishopsgate. Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. King Edward VII Hospital is the nearest hospital, about 2.7 miles north-west of Bishopsgate. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. Bishopsgate is covered by Surrey Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
Frogmore House, about 2.5 miles north, is one of the historic houses near Bishopsgate, and older buildings converted to new uses often have ventilation added later. If you manage a care home or clinic near Bishopsgate, the testing that a hospital like King Edward VII Hospital (about 2.7 miles north-west) relies on applies to your dampers too.
Bishopsgate is about 2 miles north-west of Egham, in Surrey. For fire damper testing in and around Bishopsgate, it’s easy to get a fixed quote: please give us a ring on 0345 646 2711, or send details by email. Our area covers London and the South East, Bishopsgate included. Bishopsgate is one of 395 towns, villages and districts in Surrey we cover for commercial clients. We also work in Guildford, about 13 miles from Bishopsgate.
Here we cover the TW20 postcode area for fire damper testing. Fire damper testing is available to premises on Bishopsgate Road, Ridgemead Road and Wick Lane and nearby roads. Other places close to Bishopsgate include Englefield Green (1 mile south-east), Egham Wick (1 mile south), Old Windsor (1 mile north), Wraysbury (2 miles north-east) and Egham (2 miles south-east). We also work in nearby towns such as Guildford (13 miles south), Woking (9 miles south), Camberley (10 miles south-west), Epsom (15 miles south-east), Ewell (15 miles south-east) and Walton-on-Thames (9 miles south-east).
What’s near Bishopsgate
Around Bishopsgate, our work takes us to kitchens and buildings near The Barley Mow Public House, Englefield Green Infant School and Nurseries and Windsor Great Park, among other places. The closest station to Bishopsgate is Egham station, roughly 1.8 miles east of the centre. A little further out are Berkshire Yeomanry Museum (2.4 miles north-west) and Windsor Castle (3.2 miles north). The countryside around Bishopsgate includes St Ann's Hill and Virginia Water Lake.
Common questions in Bishopsgate
Which fire and rescue service is responsible for Bishopsgate?
Surrey Fire and Rescue Service is the fire and rescue service for Bishopsgate. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
Do you work at weekends in Bishopsgate?
Yes, nights and weekends are routine for us. It means the site in Bishopsgate keeps running as normal. Tell us your opening hours when you ask for a quote.
Who is responsible for fire damper testing?
The Regulatory Reform (Fire Safety) Order 2005 puts it on the responsible person. Testing at least yearly and keeping the reports is how they can show it’s being done.
Can you price the work without visiting?
Often, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Larger or hidden systems need a survey on site first.
What happens to the waste?
It’s contained and taken away. We collect grease, debris and waste water as we go rather than letting it spread.
Is there a survey before the work?
Yes. For many sites, pictures and a few details are enough, and larger or hidden systems get a visit.
What’s TR19?
TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
Does the law say we must follow TR19?
No, not in itself. TR19® is the benchmark insurers, fire officers and EHOs check against, and many insurers ask for proof of cleaning to it. The law behind it is the Fire Safety Order 2005, which applies in England and Wales.
When to call us in Bishopsgate
In most buildings, Bishopsgate included, dampers are out of sight in ceiling voids, risers and service shafts. Without an access panel nearby, they’re easy to forget, and one that can’t be reached can’t be tested.
The symptoms we are asked about most include:
- Smoke dampers that need testing through their controls
- Fire damper items raised by an assessor
- Dampers hidden with no access panel or hatch
- Blades that jam part-way when released
For schools like St John's Beaumont School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
What to look for in a quote
- Exactly which parts of the system are covered
- If they look at the system before pricing
- Whether the quote shows VAT
- Whether they’re fully insured
When it’s something else
To be straight with you, some problems need a different fix:
- Control wiring problems outside the damper itself
- Gaps in the wall or floor around the damper
- Signing off a building’s overall fire safety
If in doubt, phone us on 0345 646 2711 or email us and we will say what we think.
Where we work
- Offices and schools
- Hospitals and care homes
- Wall and floor dampers
- Motorised smoke dampers
- Riser dampers
- Fusible link fire dampers
Nearby places to Bishopsgate
What else we do in Bishopsgate
Part by part
Access panels
Where there’s no access panel, we record the damper as not tested and say why. We can fit access panels so it’s tested next time.
Fusible link fire dampers
A damaged or painted link can stop a damper doing its job. Each link is looked at as part of the test and any problems go on the report.