Surrey · Fire damper testing
Aaron's Hill fire damper testing
Fire damper testing for Aaron's Hill and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- Smoke dampers that need testing through their controls
- Dampers that can’t be reached without an access panel
- Dampers that stick or will not close fully
Fire damper testing for kitchens and businesses in Aaron's Hill
In a fire, ductwork can act as a shortcut for flame and smoke from one part of a building to the next. That depends entirely on the blade closing all the way. Annual drop testing is how you know in each part of the building. The work covers wall and floor dampers, hospitals and care homes and offices and schools, and people most often call us about dust or grease build-up on damper blades and fire dampers that haven’t been tested for over a year.
Around a place like Aaron's Hill, dampers tend to be in schools, care homes, surgeries and hotels rather than big offices. The duty to keep them working is the same as in a city.
Nothing is signed off by word of mouth: a dated report with photos of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Location
- Aaron's Hill (GU7)
- Wider area
- Surrey
- Records
- Written report with photos
- Quote
- Fixed quote, usually within a working day
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
How it works
The first job on site is protection: floors, worktops and anything near the work are covered. Then we make the system safe and start. It takes from an hour or two in a small building to several visits on a large estate, and the area is cleaned down before we leave. A site near Aaron's Hill normally has room to park, so the questions are about access to the system and your hours.
- We plan access and timing with you first, including any out-of-hours work.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- The blade is released and watched to make sure it closes fully.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
How to prepare
- Tell us about site rules, permits or sign-in
- Tell us the best time to work, such as after service or at a weekend
- Let us know about parking and loading
How to get a quote
For a fixed quote, call us on 0345 646 2711 or drop us a line with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. We usually come back within one working day.
Read more
What a clean won’t put right
To be straight with you, there are a few things this work will not fix:
- Fire alarm or control system faults behind a smoke damper
- Ductwork crossing a fire wall with no damper fitted
- Approving the building’s fire strategy
Not sure which it is? You can call 0345 646 2711 or use the quote form and we’ll tell you honestly.
Where we work
- Riser dampers
- Wall and floor dampers
- Fusible link fire dampers
- Motorised smoke dampers
- Hospitals and care homes
- Offices and schools
Managing agents and facilities teams in Aaron's Hill
When the building owner and the occupier are different, the lease normally sets out who maintains what. We can quote either party, and the report can go to both.
Facilities teams in offices, schools and healthcare sites book us too across Surrey. Work can be phased by floor, building or site to keep disruption down.
Aaron's Hill: your questions answered
Can you work in Aaron's Hill outside opening hours?
Yes, nights and weekends are routine for us. That way a site in Aaron's Hill doesn’t have to lose a day’s trading. Just call us on 0345 646 2711 or send us an email with your opening times and we’ll plan around them.
Can a school’s dampers in Aaron's Hill be tested out of term time?
Yes. The holidays are the usual time for school work. The FSA’s register shows about 7 schools and colleges with food registrations within roughly a mile and a half of Aaron's Hill. You can call us on 0345 646 2711, or send details by email with the dates the site is empty.
How much notice do you need?
For planned work, earlier is better, especially if the next clean or test is due soon. For emergencies, we take calls 24/7.
What do you do to protect the area?
We cover floors and nearby surfaces with sheeting before work begins, and waste is contained as we go. At the end, the area is cleaned down.
Is a quote from photos possible?
Typically, yes. Send a few wide photos plus close-ups of panels, filters or grilles, and a fixed quote normally follows within one working day. If pictures aren’t enough, we will survey first.
How much time does a damper test visit need?
Typically the work takes a couple of hours for a few dampers, and a day or more across a big site. The number of dampers and how they’re reached decide the rest.
Is TR19 cleaning required by law?
No. TR19® is BESA’s specification, not legislation. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
What does fire damper testing cost?
Every site is different, so each gets its own fixed quote. To get one, call 0345 646 2711, or send details by email with the site type, opening hours and a few photos.
Fire dampers in Aaron's Hill buildings
Food Standards Agency records list about 7 schools, colleges and universities and about 14 caring premises (care homes, nurseries and hospitals) registered as food businesses in Aaron's Hill and the streets around it, up to about 1.5 miles out. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. The nearest hospital to Aaron's Hill is Milford Hospital, about 1.1 miles south. Hospitals are a good example of a building with fire dampers across many floors and departments. Aaron's Hill sits within the area of Surrey Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
A school like St Mark and All Saints Church of England Primary can have any dampers tested over half-term without disturbing lessons. For buildings around Godalming station with ducted ventilation, any fire dampers need an annual test at least. Healthcare buildings such as Milford Hospital (about 1.1 miles south) rely on fire compartments, and the dampers in them need testing at least annually.
Aaron's Hill is about 1 mile west of Godalming, in Surrey. Across the GU7 area, we can carry out fire damper testing at your premises. Across Surrey, we cover 395 places, and Aaron's Hill is one of them.
Here we cover the GU7 postcode area for fire damper testing. We cover sites on Mayen Road, Grove Road and Holly Lane and nearby roads. Aaron's Hill sits on or near the A3100, which makes travel easy for fire damper testing. Nearby, we also carry out fire damper testing in Upper Eashing (1 mile west), Godalming (1 mile east), Lower Eashing (1 mile west), Milford (1 mile south-west) and Tuesley (1 mile south). We also work in nearby towns such as Guildford (5 miles north-east), Woking (10 miles north), Camberley (11 miles north), Farnham (7 miles west), Dorking (13 miles east) and Frimley (10 miles north-west).
Around Aaron's Hill
Locally, jobs take us to businesses close to St Hilary's School, Phillips Memorial Park and The Inn on the Lake, among other places. For rail, the closest station is Godalming station, roughly 0.6 miles east of the centre. Well-known places in the area include Godalming Museum (0.7 miles east) and Guildford Castle (4.3 miles north-east). Green spaces nearby include Frith Hill and Lower Lake.
Also near Aaron's Hill
Other services in Aaron's Hill
Aftercare tips
Looking after the system between visits is straightforward, and it helps at the next visit:
- Keep damper test reports with the fire safety log
- Act on failed dampers rather than leaving them on file
- Keep cables and fixings away from damper blades
- Diary the annual test well ahead
Failed dampers are set out separately, each with the fault we found, along with an offer to repair or replace them. After a repair, we retest the damper and update the record.
Clean ductwork means less dust and grease reaching the dampers. Duct cleaning and damper testing can be planned side by side.
What affects the quote in Aaron's Hill
We quote each job individually. These are the things that affect it:
- Working hours and out-of-hours timing
- How many systems or sites are involved
- Travel, parking and unloading
- Access, including roofs, risers and ceiling voids
Putting the work off seldom saves money. Problems in a system tend to grow, and a neglected system can mean more work. If you’re not sure what’s needed, give us a ring on 0345 646 2711 or use the quote form and we’ll give you an honest view and a fixed quote.
What to send for a quote
The more you tell us, the more accurate the quote. With your enquiry, please include:
- The site address and the type of premises
- A few general shots of the system
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The paperwork from the last visit, if you have it
Need a price for fire damper testing? Please phone us on 0345 646 2711 or use the quote form with a few details about the site. We’ll talk you through the work and send you a fixed quote before anything is booked.
What staff can safely do
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
How the job changes from site to site
Fusible link fire dampers
The link has to be in good order for the damper to work. Each link is looked at as part of the test and any problems go on the report.
Ceiling voids and risers
Risers and service shafts often hold dampers at each floor. Testing goes floor by floor so each one is accounted for.