Surrey · Fire damper testing
Fire Damper Testing in Milford
One call covers fire damper testing in Milford: survey, fixed quote, work and sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Fire damper items raised by an assessor
- Blades that jam part-way when released
- Rusted damper blades and springs
Milford questions
Do you work at weekends in Milford?
Yes, we can come after you close and finish before you open. The site is handed back ready to open. Tell us your opening hours when you ask for a quote.
Which fire authority looks after Milford?
Surrey Fire and Rescue Service is the fire and rescue service for Milford. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Do you offer emergency callouts?
Yes, day and night, every day of the year. Office hours are Monday to Friday, 8am to 6pm, and the emergency line covers the rest.
What do you need from me for a quote?
Some photos and a quick description of the system, with the address and opening hours. If we need more, we’ll ask.
Who is the responsible person?
In the words of the Fire Safety Order 2005, it’s the responsible person. That is generally the employer or the person in control of the premises, and in shared buildings more than one person can have duties. If you are not sure, check your lease and fire risk assessment.
How do you protect the area?
We start with protection: floor sheeting and covers over nearby surfaces and equipment. We tidy up and take our waste away before we leave.
What paperwork do we get after testing?
You get a test report recording every damper we tested, with its location, its result and any faults. Keep it with your fire safety records.
What do you do with what you remove?
It leaves the site with us at the end of the visit. While we work, it’s kept contained so the area stays clean.
About our fire damper testing in Milford
Fire dampers sit inside ductwork where it passes through a fire-resisting wall or floor. Most are held open by a fusible link that melts at a set temperature, letting the blade drop and close the duct. Drop testing proves that this still happens, and every result is written down, damper by damper. Common call-outs are for blades that jam part-way when released and buildings with no damper register, across wall and floor dampers, fusible link fire dampers and riser dampers.
In a smaller place like Milford, buildings with fire dampers are more likely to be a school, a surgery, a care home or a hotel than an office block. The law on keeping them working doesn’t change with the size of the place.
A written report with pictures follows every visit, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Place
- Milford (GU8)
- Wider area
- Surrey
- Paperwork
- Report and pictures after the visit
- Quote
- A fixed quote up front
- Hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Between visits
Good habits slow the build-up between visits. Our tips:
- Tell contractors where dampers are before they start work
- Don’t let hatches get painted shut or boarded over
- Keep damper test reports with the fire safety log
- Don’t let anything obstruct a damper’s blade
After testing, you get a report listing each of the fire and smoke dampers we tested, with its location and its result. File it with your fire safety log so it’s ready when your assessor or insurer asks.
Clean ductwork means less dust and grease reaching the dampers. It makes sense to plan duct cleaning and damper testing together.
Why it’s worth doing now in Milford
A damper that’s stuck open gives fire and smoke a route straight through a fire-resisting wall. Everything else about the compartment can be right and the duct still lets it down. Testing now is how you find out before it matters. Light use slows the build-up but does not stop it.
Several systems or sites on one quote often makes better use of the time. Tell us about everything you’d like looked at, and you’ll get one fixed quote.
Why book with us
- We diagnose before we treat
- Fully insured
- A fixed price before any work starts
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Take a look at how cleaning jobs are priced and our accreditations.
What fire damper testing looks like in Milford
Food Standards Agency data includes about 3 care, childcare and hospital premises in and around Milford, up to about a mile and a half out. If any of them has ducted ventilation, its dampers need an annual drop test at least. Milford Hospital is the nearest hospital, about 1 mile east of Milford. Healthcare buildings rely on fire compartments to protect people who cannot easily move, and dampers keep those compartments sealed. Milford is covered by Surrey Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
A school like Milford School can have any dampers tested over half-term without disturbing lessons. The nearest hospital, Milford Hospital, is about 1 mile east; healthcare buildings like it are a reminder that dampers protect people who cannot move quickly.
Milford is about 6 miles south-west of Guildford, in Surrey. Whatever kind of site you run in Milford, we can take on fire damper testing. We can work out of hours so the site keeps running. We cover 395 places across Surrey, from busy centres to quieter spots. We also work in Guildford, around 6 miles away.
Our technicians cover all of the GU8 postcode area for fire damper testing and the roads nearby. Fire damper testing is available to premises on Church Road, Upper Manor Road and Elmside and the roads around them. If your site is just outside Milford, we cover Mousehill (1 mile south-west), Cramhurst (1 mile south), Upper Eashing (1 mile north), Ockford Ridge (1 mile south-east) and Lower Eashing (1 mile north). We also work in nearby towns such as Guildford (6 miles north-east), Woking (10 miles north), Camberley (12 miles north), Farnham (7 miles north-west), Dorking (14 miles east) and Frimley (10 miles north).
Around Milford
Around Milford, our work takes us to kitchens and buildings near Rodborough, St Hilary's School and Rodborough Common, among other places. The closest station to Milford is Milford (Surrey) station, roughly 0.8 miles south-east. Nearby you’ll also find Godalming Museum (1.7 miles north-east) and Milford Hospital (1 mile east). Green spaces nearby include Lower Lake and Frith Hill.
Landlords, agents and facilities managers
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.
How the job changes from site to site
Ceiling voids and risers
Where ductwork runs up through a building, there are often dampers at every floor. We work through them floor by floor so nothing is missed.
Smoke dampers
A smoke damper is opened and closed by a motor, not a link. Testing means operating them from the controls and check each blade travels fully.
Do you need fire damper testing in Milford?
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has a duty to keep fire safety measures working, and dampers are part of those measures. Employers, owners, landlords and managing agents all need evidence that the dampers have been checked.
It’s time to book a visit if you see:
- Motorised smoke dampers due for testing
- Dampers flagged on a fire risk assessment
- Corroded dampers in damp risers and plant rooms
- Missing or out-of-date damper records
Loseley Park, about 3.5 miles north-east, is one of the historic houses near Milford, and older buildings converted to new uses often have ventilation added later.
What your quote should include
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Whether the quote shows VAT
- Whether inaccessible sections are listed on the report
- Whether the price is fixed
Places near Milford
What else we do in Milford
What fire damper testing can’t fix
We will always give you a straight diagnosis, so here’s what this work cannot put right:
- Fire risk assessments, which need a fire risk assessor
- Fire alarm or control system faults behind a smoke damper
- Signing off a building’s overall fire safety
Not sure which it is? You can call 0345 646 2711 or use the quote form and we’ll tell you honestly.
Parts of the system we cover
- Fusible link fire dampers
- Wall and floor dampers
- Motorised smoke dampers
- Riser dampers
- Offices and schools
- Hospitals and care homes
How the visit works
Everything the job needs comes with us, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. The visit takes anything from a couple of hours for a handful of dampers to a full day for a large building. Tell us about any gates, ladders or locked plant areas at your site near Milford when you book.
- First we look at any damper register, drawings or earlier test reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- We reset every damper that passes and check it’s left open.
- You get a report listing each damper, its result and any remedials needed.
Getting ready for the visit
- Make sure equipment near the work can be switched off and left to cool
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Agree a time when the area can be out of use
How to get a quote
There’s no standard price list, because no two systems are the same. We look at your system first, from photos or on a visit, and then send you a fixed quote. To get going, phone us on 0345 646 2711, or send details by email.