Kent · Extract fan repair and replacement
Extract fan repair and replacement in Yalding, Kent
Need extract fan repair in Yalding? We survey first, send you a fixed quote and work around your opening hours, finishing with a written report and pictures.
- A fan that won’t start at all
- A fan running too slowly to clear the kitchen
- An extract that vibrates through the ductwork
How we handle extract fan repair in Yalding
The extract fan is what pulls smoke, heat and steam out of the kitchen. Once it turns noisy, sluggish or stops altogether, the cooking area soon fills with heat and fumes. We find out why and put it right, by repairing the fan or replacing it. We’re often asked to deal with a fan running too slowly to clear the kitchen and a belt-driven fan that squeals, on fan housings, belts and pulleys and roof and wall fans.
In a small place like Yalding, fans are often on an outside wall or roof, open to wind and rain. That, with the grease, is hard on motors and bearings.
The sign-off is always in writing: a dated report with pictures of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Place
- Yalding (ME18)
- Region
- Kent
- Paperwork
- Written report with pictures
- Quotes
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
When a fan fails in Yalding
There are about 6 restaurants, cafés and works canteens in Yalding and the streets around it, up to about 1.5 miles out, according to the Food Standards Agency’s register. Every one of them that cooks under a canopy depends on its extract fan to keep cooking. Kitchens in Yalding get their food hygiene inspections from Maidstone council. Food premises are expected to have suitable and sufficient ventilation under food hygiene rules. That makes a fan repair urgent rather than something to put off. About 30 miles out from central London, Yalding is part of the South East area we work across. The visit is fixed around your opening hours, not ours.
Occasional-use kitchens, such as a hall kitchen near St Peter's and St Paul's Church or elsewhere in Yalding, are where a stiff or seized fan can turn up.
Yalding is about 5 miles south-west of Maidstone, in Kent. Anywhere in ME18, we can carry out extract fan repair at your premises. Yalding is one of 922 towns, villages and districts in Kent we cover for extract fan repair.
Every address in ME18 is covered for extract fan repair, from the main roads to the quietest streets. That includes premises on High Street, Windmill Path and Blunden Lane and the roads around them. Neighbouring places we cover for extract fan repair include Congelow (1 mile south), Benover (1 mile south), Hunton (1 mile south-east), Nettlestead Green (1 mile north-west) and Laddingford (1 mile south-west). Larger places within reach include Maidstone (5 miles north-east), Sittingbourne (15 miles north-east), Sevenoaks (11 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (14 miles north) and Tonbridge (7 miles west).
Around Yalding
Locally, jobs take us to businesses close to Quarry Wood and The Walnut Tree Public House, among other places. The closest station to Yalding is Yalding station, about 1 mile west. A little further out are Oakwood Hospital (3.7 miles north-east) and Teapot Island (0.8 miles south-west).
What happens if it’s left?
Some kitchens run a noisy fan on a lower speed to cut the noise. That reduces extraction without fixing anything while the underlying wear continues. Diagnosing the fault properly is the lasting answer. Rural sites cannot always move to another kitchen or room when something fails.
You won’t find a price list here, because the cost depends on the site in front of us. Call for a fixed quote, and we’ll talk you through it.
Why choose Duct Doctor in Yalding
- Fixed quotes from a survey or photos
- Every job surveyed first
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Ventilation hygiene specialists since 2009
Take a look at how cleaning jobs are priced and how to check a contractor.
When something else is needed
We’ll always give you a straight diagnosis, so here’s what extract fan repair will not do:
- Grease build-up in the rest of the extract system
- A system that needs redesigning rather than repairing
- Wiring and supply faults beyond the fan itself
Not sure which it is? You can give us a ring on 0345 646 2711 or send us an email and we’ll tell you honestly before you book.
Parts of the system we cover
- Kitchen extract fans
- Belts and pulleys
- Fan housings
- Fan motors
- Bearings
- Roof and wall fans
Landlords, agents and facilities managers
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we’ll come back with a fixed quote.
Whether it’s one building or many, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with pictures.
Different parts, different methods
Belt-driven fans
Belt-driven fans have a motor that turns the impeller through belts and pulleys. Worn belts squeal and slow the fan down, so we check the pulleys and bearings as well.
Fan controls
Where the fault is in the building’s electrical supply, an electrician is needed. We’ll tell you if that is what we find and explain what we found.
Do you need extract fan repair in Yalding?
Over the years, mountings loosen and rubber mounts break down. Then every vibration is passed into the duct and the building and that is a common source of rattles.
It’s time to book a visit if you see:
- A whining or grinding extract motor
- An extract fan that rattles or knocks
- An overheating extract motor
- A dead fan motor
Fan failures around Yalding don’t keep office hours, and neither does our emergency line.
What your quote should include
- If they look at the system before pricing
- If the quote is a fixed price or an estimate
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Whether a written report and pictures are included
Fixed quotes for extract fan repair in Yalding
The diagnosis comes before the price. We look at:
- Where the site is and how we reach it
- How big the system is
- Site rules, permits and inductions
- A single visit or a regular plan
The price reflects the work, not guesswork. That’s why every job is surveyed first, and why the quote is fixed before work begins.
What to send for a quote
Before you ask for a quote, gather:
- How we’d reach plant on a roof or in a plant room
- Where the site is and what kind of site it is
- Detail shots of panels, filters and grilles
- Problems your staff have spotted
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.
Yalding: your questions answered
Will you come out to Yalding?
Yes, Yalding is part of our area, however small the site. Photos of the system and directions to the site help us plan the visit.
Can you work in Yalding outside opening hours?
Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. Just call us on 0345 646 2711 or use the quote form with your opening times and we’ll plan around them.
Is TR19 a legal requirement?
No, not in itself. TR19® is the benchmark insurers, fire officers and EHOs check against, and many insurance policies ask for proof of TR19® cleaning. The law behind it is the Fire Safety Order 2005 in England and Wales.
Will you fit a new fan if ours can’t be repaired?
We can. We fit replacement fans as well as repairing old ones and we’ll talk you through what’s involved.
Do you provide a certificate or report?
Yes. It’s the record insurers and inspectors ask to see: a dated report with pictures, listing the work and any areas we couldn’t reach.
Do you have insurance?
Yes. We are fully insured, and the details are available on request.
Which sectors do you work in?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, plus food production and leisure sites.
What does TR19 mean?
TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
How the visit works
The first job on site is protection: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. The work on site takes a few hours for most repairs, longer for a full fan replacement, and the area is cleaned down before we leave. A quick note on how to find the site and where to park makes a visit to Yalding run smoothly.
- We agree a time to attend, out of hours if needed.
- We isolate the extract and open the fan housing.
- We inspect every moving part and the fixings.
- You hear whether repair or replacement makes sense, with a fixed quote.
- We complete the work and check the fan runs smoothly.
How to prepare
- Tell us where we can park and unload
- Move anything stored near the system
- Have your last certificate or report to hand
Get a fixed quote
For a fixed quote, call 0345 646 2711 or email us and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. We typically come back within one working day.