Hampshire · Extract fan repair and replacement
Extract fan repair and replacement in Mullenspond, Hampshire
Extract fan repair for Mullenspond, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- A humming noise from the fan motor
- Poor airflow at the canopy
- A fan that keeps cutting out
Extract fan repair for kitchens and businesses in Mullenspond
Our engineers handle all sorts of fan faults in Mullenspond, from rattling and humming to a fan that has stopped dead. We find the cause, give you a fixed price and fix it or fit a replacement when it’s beyond repair. If you have a fan worn beyond sensible repair and vibration spreading from the fan into the ducts, we can put it right.
For a fan repair in or near Mullenspond, the more you tell us about the fan, the better the first visit: pictures of the fan, its rating plate and how to reach it all help.
The report is your system’s health record: a dated account with pictures of everything we did. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.
- Location
- Mullenspond (SP11)
- Region
- Hampshire
- Reporting
- Written report with photos
- Quotes
- A fixed price before work begins
- When we work
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Mullenspond questions
Can you come to Mullenspond after we close?
Yes, out-of-hours work is a big part of what we do. That way a site in Mullenspond doesn’t have to lose a day’s trading. When you call us on 0345 646 2711, or email photos, mention when the site is quiet.
Can you get to a site in Mullenspond?
Yes, smaller places are covered as well as towns. A survey first, from pictures or a visit, means we arrive with the right kit.
What do you do with what you remove?
It leaves the site with us at the end of the visit. During the work, it’s contained to keep the area clean.
Does a faulty extract fan always need replacing?
In many cases, yes. A clean, a new belt or new bearings can bring a fan back and we only recommend replacement when repair doesn’t make sense.
What causes a noisy extract fan?
Noise usually comes from grease build-up, bearings, belts or loose fixings. Rattles, whines and grinding point to different faults and we find the exact cause on site.
Do you have insurance?
Yes. We carry full insurance and have been trading since 2009.
Do you provide a certificate or report?
Yes. It’s your proof that the work was done: a dated report with photos, listing the work and any areas we couldn’t reach.
What do you do to protect the area?
Protection goes down first: floor sheeting and covers over nearby surfaces and equipment. We tidy up and take our waste away before we leave.
When it’s something else
A few issues sit outside what this work can do:
- A system that needs redesigning rather than repairing
- Faults in the building’s electrical supply, which need an electrician
- Problems with the gas supply or its interlock valve
Not sure which it is? You can call 0345 646 2711 or send us an email and we will tell you honestly before booking.
What the work covers
- Belts and pulleys
- Fan housings
- Kitchen extract fans
- Bearings
- Roof and wall fans
- Fan motors
What the work involves, part by part
Roof and wall-mounted fans
Noise from an outside fan can carry beyond the kitchen. Loose fixings and worn mounts are often the cause.
Belt-driven fans
Squealing at start-up often points to a belt. Belts are checked for wear, tension and alignment and renew them where necessary.
Staff cleaning versus specialist work
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, they should report it rather than try to fix it. We’ll take a look and send you a fixed quote.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. That is our job.
When to call us in Mullenspond
Some grease always slips past the filters and reaches the fan. Deposits gather on the blades, never quite evenly, and an unbalanced impeller shakes and starts to vibrate and rattle.
Look out for any of the following:
- A fan worn beyond sensible repair
- Vibration spreading from the fan into the ducts
- A fan running too slowly to clear the kitchen
- An extract fan that rattles or knocks
If you run a school kitchen, at a school such as Amport Church of England Primary School or nearby, a fan that’s getting noisy is best repaired in the holidays before it fails in term.
What to look for in a quote
- When the next visit should be, and why
- If they look at the system before pricing
- Whether they’re fully insured
- What paperwork you get at the end
Looking after it afterwards
Aftercare is simple, and it helps at the next visit:
- Make sure the isolator and controls are easy to reach
- Keep a record of any trips or stoppages
- Do not cook with gaps in the filter bank
- Keep the fan on a planned cleaning cycle
Before we leave, the fan is run and checked. We explain the fault and the fix, and anything else we noticed is pointed out.
When filters block, the fan works harder. Keeping filters clean eases the strain and helps prevent overheating.
What extract fan repair looks like in Mullenspond
The FSA’s food hygiene register shows about 5 cafés, restaurants and staff canteens within 1.5 miles or so of the middle of Mullenspond. Every one of them that cooks under a canopy depends on its extract fan to keep cooking. In Mullenspond, food businesses are inspected by environmental health officers from Test Valley council. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. So a failed fan is worth fixing before the next service, not the next month.
If you look after a church or hall kitchen near Church of St Nicholas, or anywhere in Mullenspond, test the extract fan before a big event rather than on the day.
Mullenspond is about 4 miles west of Andover, in Hampshire. We provide extract fan repair for commercial premises of every kind in Mullenspond and the rest of Hampshire. 683 places in Hampshire are on our list, from busy centres to quieter spots. We also work in Southampton, around 22 miles away.
Every address in SP11 is covered for extract fan repair, from the main roads to the quietest streets. We cover sites on Amesbury Road and Wiremead Lane and the roads around them. Nearby, we also carry out extract fan repair in East Cholderton (1 mile south), Thruxton (1 mile west), Fyfield (1 mile north-west), Weyhill (1 mile north-east) and Red Post Bridge (2 miles east). We also work in nearby towns such as Winchester (15 miles south-east), Andover (4 miles east), Hyde (15 miles south-east), Tidworth (4 miles north-west), Weeke (14 miles south-east) and Stanmore (15 miles south-east).
What’s near Mullenspond
In Mullenspond, that means kitchens and buildings near White Horse Inn. The nearest railway station is Grateley station, about 3.4 miles south-west of the centre. A little further out are Ludgershall Castle (3.9 miles north-west) and Andover War Memorial Hospital (3.5 miles east). Not far away are Mill Lake and Quarley Hill.
Landlords, agents and facilities managers
Whether it’s one building or many, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with pictures.
Running several sites is easier with one contractor. We cover South East England and London, so visits at different addresses can be planned together and kept on a regular cycle.
Nearby places to Mullenspond
More services for Mullenspond
What happens on the day
Every visit runs to the same pattern: sheeting and protection first, make the system safe, carry out the extract fan repair, tidy up and leave you the report. The visit itself takes anything from an hour or two to a full visit, depending on the fault. For a village or hamlet like Mullenspond, tell us about narrow lanes, gates and parking when you book.
- We start with the symptoms, such as rattling, humming, slow running or a fan that won’t start.
- Power to the fan is isolated before we open the housing.
- The impeller, bearings, belts or drive, motor and mounts are all inspected.
- We explain the fault and give you a fixed price for the fix.
- The repair or replacement is carried out and the fan is run and checked.
How to prepare
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Dig out any earlier paperwork for the system
- Mention any sign-in, permit or induction we need
Getting a quote
Quoting starts with a diagnosis, from your photos and details or, where that isn’t enough, a survey on site. Then we send a fixed price, before any work starts.