Kent · Extract fan repair and replacement
Extractor fan repair in Hilden Park
Repair and replacement of kitchen extract fans, fan motors and worn fan parts in Hilden Park, surveyed first and signed off with a written report and pictures. Ask us for a fixed quote.
- An overheating extract motor
- Poor airflow at the canopy
- A fan worn beyond sensible repair
Keeping the system healthy
How long the results last depends on use and care. Here’s what we suggest:
- Note when the fan trips or cuts out
- Keep the grease filters clean and fitted
- Save our number for the 24/7 emergency line
- Keep the fan on a planned cleaning cycle
Your kitchen can get back to normal as soon as the fan is running. We leave the area tidy and talk you through what we found.
A 3, 6 or 12-monthly cleaning plan brings us back at set intervals, which means the fan is seen regularly and wear is caught earlier.
About our extract fan repair in Hilden Park
Wherever your kitchen is in Hilden Park, fan work means the extract has to be isolated, so the job is fitted around the kitchen’s hours. Evenings, overnight and weekends are all possible and there’s a 24/7 emergency line if the fan fails while you are cooking. The work covers kitchen extract fans, bearings and fan housings, and common reasons people get in touch are a fan worn beyond sensible repair and vibration spreading from the fan into the ducts.
Rural kitchens often have fans mounted on outside walls or roofs, exposed to the weather. That, with the grease, is hard on motors and bearings.
Accreditations are easy to claim and worth checking. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Location
- Hilden Park (TN11, TN10)
- Wider area
- Kent
- Records
- Written report with pictures
- Quote
- A fixed price before work begins
- When we work
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
Extract fans in Hilden Park
Food Standards Agency records list about 56 restaurants, cafés and canteens and about 29 sandwich bars and takeaways within roughly a mile and a half of the centre of Hilden Park. Those that cook under a canopy rely on a fan that runs every hour they’re open. Environmental health officers from Tonbridge and Malling council inspect food businesses in Hilden Park. Food premises are expected to have suitable and sufficient ventilation under food hygiene rules. That is one more reason not to keep cooking with a broken fan. Hilden Park, about 25 miles from central London, is within our usual area. The visit is fixed around your opening hours, not ours.
If you run a school kitchen, at a school such as Stocks Green Primary School or nearby, a fan that is getting noisy is best repaired in the holidays before it fails in term. A fan that rarely runs, like one in a hall kitchen near Parish Church of St John or elsewhere in Hilden Park, can seize between uses.
Hilden Park is about 1 mile north-west of Tonbridge, in Kent. We carry out extract fan repair for commercial premises of every kind in Hilden Park and the rest of Kent. 922 places in Kent are on our list, from busy centres to quieter spots. Our Maidstone page covers sites nearby (12 miles or so).
Here we cover the TN11 and TN10 postcode area for extract fan repair. Local streets include London Road, Elm Grove and Bramble Close, and we cover them all for extract fan repair. Close by, we work in Hildenborough (1 mile north-west), Stocks Green (1 mile west), Coldharbour (1 mile north), Watt's Cross (2 miles north-west) and Budds (3 miles north). Larger places within reach include Maidstone (12 miles east), Sevenoaks (6 miles north-west), Royal Tunbridge Wells (5 miles south), Swanley (13 miles north), Kings Hill (8 miles north-east) and Foley Park (13 miles north-east).
Around Hilden Park
We work in commercial kitchens and buildings around Hugh Christie Technology College, Haysden Country Park and The Flying Dutchman Public House. Hilden Park’s nearest station is Hildenborough station, about 1.2 miles west of the centre. Other landmarks nearby include The Milne Museum (1.1 miles south-east) and Tonbridge Cottage Hospital (2.3 miles south). Open spaces near Hilden Park include Barden Lake and Tudeley Woods RSPB reserve.
Common questions in Hilden Park
Do you cover smaller places like Hilden Park?
Yes, we work in villages as well as towns, and Hilden Park is covered. A survey first, from photos or a visit, means we arrive with the right kit.
Do you work at weekends in Hilden Park?
Yes, out-of-hours work is a big part of what we do. Your customers, staff or residents in Hilden Park needn’t be disturbed. Let us know the hours you are closed and we will book within them.
What should go in our maintenance log?
Visit reports, certificates and your in-house cleaning logs. They’re what an insurer, fire officer or EHO may ask for, so keep them together and easy to find.
Which sectors do you work in?
Commercial premises of every kind: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. We fit the work around how the site operates.
Will you fit a new fan if ours cannot be repaired?
Yes, when repair does not make sense. The replacement has to suit the ductwork and the cooking so we confirm that first.
Does the report say when we need you again?
Yes. We put a recommended next date on the report. For kitchen extracts, BESA’s minimum intervals run from every 3 months for heavy use to every 12 months for light use, while fire dampers are tested at least annually.
What if parts of the system can’t be reached?
Anything we can’t reach goes on the report, with a note of where it is, and we tell you what would make it reachable, such as extra access panels in ductwork.
Who is responsible for fire safety on the premises?
In the words of the Fire Safety Order 2005, it’s the responsible person. It’s normally the employer, or whoever controls the building, and where several people have control, each can have duties. Your lease and fire risk assessment should make it clear.
What affects the quote in Hilden Park
Your quote is based on your site. We take into account:
- Access, including roofs, risers and ceiling voids
- How many systems or sites are involved
- Working hours and out-of-hours timing
- What state the system is in
Combining work into one visit or one programme often makes better use of the time. Mention every system or site you need covered and we will price it together.
Helping us quote
Photos let us diagnose from a distance. Try to include:
- How we’d reach plant on a roof or in a plant room
- The site address and the type of premises
- Detail shots of panels, filters and grilles
- Photos showing the whole system and its surroundings
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, the quote is fixed before any work is booked.
What extract fan repair cannot fix
Some problems need a different service or another trade:
- Ductwork designed too small for the kitchen’s cooking
- Gas interlock faults that a Gas Safe registered engineer must deal with
- Grease throughout the ductwork, which needs a full TR19 clean
Not sure which it is? You can give us a ring on 0345 646 2711 or email us and we’ll tell you honestly.
Where we work
- Bearings
- Kitchen extract fans
- Roof and wall fans
- Fan housings
- Fan motors
- Belts and pulleys
What happens on the day
Our technicians bring everything the work needs, from protective sheeting to tools and access equipment. You only need to give us clear access and switch off what needs to be off. On site, the work takes an hour or two to diagnose, then longer if parts or a new fan are needed. A few pictures of the system help us make the most of a visit to a place like Hilden Park.
- You describe the fault and we arrange a visit.
- On site, the fan is safely isolated.
- We diagnose the fault, checking the controls as well as the fan.
- You get a fixed price for putting it right.
- The work is done and the fan is tested running.
Getting ready for the visit
- Mention any sign-in, permit or induction we need
- Let us know how we reach the system, including roofs, risers and plant rooms
- Let us know when the site is closed or quiet
How to get a quote
To get a fixed quote, call 0345 646 2711 or drop us a line with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. We normally come back within one working day.
Advice
Towns and villages near Hilden Park
Also in Hilden Park
Why deal with it now?
Fan noise tends to get worse, not better. Worn bearings can seize without much warning and the fan may stop when you’re busiest. A repair booked now is simpler than an emergency later. With notice, the visit to Hilden Park can be fitted around your bookings and events.
When the work has to happen, how we reach it and how big the site is can all change the price. Each of those is built into the quote and give you a fixed price before we start.
Why Hilden Park businesses choose us
- We’re fully insured
- One number for every site across the South East and London
- CHAS, SafeContractor and ISO 9001
- Out-of-hours work and a 24/7 emergency line
Multi-site and managed buildings
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we are happy to quote for all of it.
We also work for facilities teams across offices, schools and healthcare across Kent. Work can be phased by floor, building or site around the people who use them.
What your team can do, and what needs us
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That is our job.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.