Southend-on-Sea · Extract fan repair and replacement
Great Wakering extract fan repair
Specialist extract fan repair for Great Wakering: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- Poor airflow at the canopy
- An extract fan that rattles or knocks
- A fan that whines, hums or grinds
How we handle extract fan repair in Great Wakering
A faulty fan doesn’t always mean a new one. Sometimes cleaning the impeller or renewing worn parts is enough, and that is what we’ll recommend. When a fan is worn beyond sensible repair, we fit a replacement matched to the duct and the kitchen. We’re often asked to deal with a fan rattling in its housing and a dead fan motor, across bearings, fan housings and roof and wall fans.
Around a place like Great Wakering, a pub, café or care home kitchen with a failed fan can’t carry on cooking as normal. Our 24/7 emergency line is there for exactly that.
Think of the report as the system’s health record: dated, with photos, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Place
- Great Wakering (SS3)
- Wider area
- Southend-on-Sea
- Records
- Report and pictures after the visit
- Quote
- A fixed quote up front
- Working hours
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Checked
- 30 October 2026

For landlords and multi-site operators
Keeping records across a portfolio is half the battle. Each visit produces a dated report with pictures, so you can show an insurer or inspector what was done at each site.
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.
Staff cleaning versus specialist work
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
What a clean won’t put right
Before booking, it helps to know what’s not included:
- Problems with the gas supply or its interlock valve
- An extract system that was undersized from the start
- A greasy canopy and duct that a fan repair will not touch
If you are not sure, just give us a ring on 0345 646 2711 or send us an email and we will give you a straight answer before booking.
What we work on in Great Wakering
- Fan motors
- Belts and pulleys
- Bearings
- Roof and wall fans
- Fan housings
- Kitchen extract fans
Keeping the system healthy
Think of this as the after-treatment advice, short and simple:
- Do not cook with gaps in the filter bank
- Write down when the fan misbehaves
- Make sure the fan is cleaned with the rest of the system
- Make sure the isolator and controls are easy to reach
Where parts need ordering, we explain what that means for the kitchen until we return. The fan is completed on a return visit at a time that suits your service.
Regular TR19 cleaning includes the extract fan. A clean impeller stays in balance and that means less wear.
The process
Everything the job needs comes with us, from protective sheeting to tools and access equipment. You only need to give us clear access and switch off what needs to be off. On site, the work takes an hour or two to diagnose, then longer if parts or a new fan are needed. Visits to a place like Great Wakering are planned ahead, so we arrive with what the survey says the job needs.
- We ask what the fan is doing, from noise and vibration to a full stop.
- Power to the fan is isolated before we open the housing.
- The impeller, bearings, belts or drive, motor and mounts are all inspected.
- We explain the fault and give you a fixed price for the fix.
- Once the work is done, we run the fan and check it’s steady and quiet.
Preparing for the visit
- Tell us where we can park and unload
- Mention any locked doors, roof access or ceiling voids
- Make sure equipment near the work can be switched off and left to cool
Ask for a quote
Getting a quote doesn’t take long. Send a few details and pictures, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Read more
Great Wakering questions
Can you work in Great Wakering outside opening hours?
Yes, out-of-hours work is a big part of what we do. The work in Great Wakering can fit around your hours. Tell us your opening hours when you ask for a quote.
Does coastal air change anything about extract fan repair in Great Wakering?
It can, as Great Wakering is within about 2 miles of the sea, where salt in the air is hard on metal. Outdoor metalwork near the sea is worth inspecting at every visit.
What’s TR19?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It sets out inspection, cleaning and record keeping and expects a risk-based approach.
Does the law say we must follow TR19?
Not in itself. TR19® is the benchmark insurers, fire officers and EHOs check against, and many insurance policies ask for proof of TR19® cleaning. The legal duty sits in the Regulatory Reform (Fire Safety) Order 2005 in England and Wales.
Why is our extract fan so noisy?
There are several possible causes, from a worn bearing to a loose fixing. The safest step is a proper diagnosis before the fault gets worse.
How far ahead should we book?
It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.
Do we need to close while you work?
Not normally. Out-of-hours visits keep the disruption down. Bigger sites can be done in stages so parts stay in use.
What paperwork should we keep on file?
Visit reports, certificates and your in-house cleaning logs. Insurers, fire officers and EHOs may all ask to see them, so keep them where they can be found quickly.
Part by part
Motors and bearings
Rumbling and grinding normally come from the bearings. We diagnose whether it’s the bearings or the motor itself and then recommend the fix.
Impellers and housings
The fan housing collects grease too. We check both, and cleaning can form part of the repair.
Nearby places to Great Wakering
Also in Great Wakering
Common problems we fix in Great Wakering
Fan bearings do not last for ever, especially in a hot, greasy airstream. As they wear, you hear a whine or a rumble and a seized bearing stops the fan.
Clients typically contact us when they notice one of these:
- A squealing belt on start-up
- A fan rattling in its housing
- A whining or grinding extract motor
- A failed fan that needs a replacement
Occasional-use kitchens, such as a hall kitchen near Church of St Nicholas or elsewhere in Great Wakering, are where a stiff or seized fan can turn up.
Before you book anyone
- When they can work, and whether that is outside your opening hours
- If the quote is a fixed price or an estimate
- How areas they can’t reach will be recorded
- When the next visit should be, and why
What extract fan repair looks like in Great Wakering
Great Wakering lies within about 2 miles of the sea. Motor mounts, bolts and housings on outdoor fans corrode faster close to the coast. The FSA’s food hygiene register shows about 6 cafés, restaurants and staff canteens and about 4 sandwich bars and takeaways in Great Wakering and the streets around it, up to about 1.5 miles out. Every one of them that cooks under a canopy depends on its extract fan to keep cooking. Environmental health officers from Rochford council inspect food businesses in Great Wakering. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. That is one more reason not to keep cooking with a broken fan.
If you manage a school such as Great Wakering Primary Academy and the kitchen fan is getting louder, the next break is the time to deal with it.
Great Wakering is about 1 mile north-east of Shoeburyness, in Southend-on-Sea. Great Wakering gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with pictures. Great Wakering is one of 16 places in Southend-on-Sea we cover for commercial clients. Chelmsford is in our area too, about 19 miles from Great Wakering.
Here we cover the SS3 postcode area for extract fan repair. You will find streets such as High Street, Conway Avenue and North Street, and we cover them all for extract fan repair. Neighbouring places we cover for extract fan repair include Little Wakering (1 mile north-west), North Shoebury (1 mile south-west), Shoeburyness (1 mile south-west), Barling (2 miles north-west) and Stonebridge (2 miles west). Larger places within reach include Southend-on-Sea (5 miles west), Prittlewell (4 miles west), Leigh-on-Sea (7 miles west), Westcliff-on-Sea (5 miles west), Southchurch (3 miles west) and Chalkwell (6 miles west).
Landmarks near Great Wakering
In Great Wakering, that means kitchens and buildings near Shoeburyness High School and The White Hart Public House. Great Wakering’s nearest station is Shoeburyness station, roughly 1.5 miles south. A little further out are Southend University Hospital (5.1 miles west). Open spaces near Great Wakering include Gunners Park and Shoebury Ranges.