Kent · Extract fan repair and replacement
Extract fan repair and replacement in Conyer, Kent
For extract fan repair in Conyer, one call is all it takes, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- An old fan that needs replacing
- An extract that vibrates through the ductwork
- A fan that whines, hums or grinds
What your team can do, and what needs us
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We will take a look and send you a fixed quote.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that is where we come in.
Extract fan repair for kitchens and businesses in Conyer
Our engineers handle all sorts of fan faults in Conyer, from rattling and humming to a fan that has stopped dead. We find the cause, give you a fixed price and fix it or fit a replacement when it’s beyond repair. The work covers fan housings, belts and pulleys and roof and wall fans, and the jobs we see most are a fan that won’t start at all and a failed fan that needs a replacement.
Somewhere as small as Conyer, a kitchen extract fan might serve a pub, a school, a care home or a hall kitchen. When one fails, the cooking stops, and emergency callout is available 24/7, villages included.
A written report with pictures follows every visit, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Conyer (ME9)
- Wider area
- Kent
- Paperwork
- Written report with photos
- Quote
- A fixed price before we start
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
When something else is needed
We’d rather tell you now than book work that will not help, so these are the things it won’t cover:
- Gas interlock faults that a Gas Safe registered engineer must deal with
- Problems with the electrical supply to the fan (an electrician’s job)
- A system that needs redesigning rather than repairing
Not sure which it is? You can call 0345 646 2711 or send us an email and we’ll tell you honestly.
Where we work
- Belts and pulleys
- Bearings
- Kitchen extract fans
- Roof and wall fans
- Fan motors
- Fan housings
Aftercare tips
After the visit, a few habits help the work last:
- Book regular TR19 cleaning, which includes the fan
- Note when the fan trips or cuts out
- Do not cook with gaps in the filter bank
- Clean or change filters on schedule
Once we are done, the extract is back in service. We leave the area tidy and explain anything you need to know.
Noise is normally the first sign of a fan problem. Getting it checked now means a planned repair rather than an emergency during service.
Conyer: your questions answered
Does coastal air change anything about extract fan repair in Conyer?
It can. Salt air reaches Conyer, which is within about 1 mile of the coast, and it speeds up rust. Outdoor metalwork near the sea is worth inspecting at each visit.
Will you come out to Conyer?
Yes, smaller places are covered as well as towns. Let us know about access, parking and anything unusual about getting there when you book.
Will you tell us when the next visit is due?
Yes. We put a recommended next date on the report. For kitchen extracts, BESA’s minimum intervals run from every 3 months for heavy use to every 12 months for light use, while fire dampers are tested at least annually.
What about areas you can’t get to?
They’re marked on the report. In ductwork, new access panels are often the answer, and we can fit those.
Will I get paperwork for my records?
Yes, on every job. The report is dated and includes pictures, and TR19® Grease cleans come with a certificate through the BESCA VHE portal. File it with your fire safety records.
Are you accredited?
We hold CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
How long does an extract fan repair take?
That depends on what’s wrong, but as a guide it takes a few hours on site, depending on the fault and the access to the fan. You will know more once we’ve found the fault.
How much does an extract fan repair cost?
It depends on the fault, the parts and the access. We diagnose first and give you a fixed price so there are no surprises.
Do you need extract fan repair in Conyer?
Some faults are in the controls rather than the fan. A failed speed controller or a wiring fault can stop a fan so we check the controls before blaming the motor.
Keep an eye out for these warning signs:
- A motor that trips out or overheats
- An extract fan that rattles or knocks
- Weak extraction and a smoky kitchen
- An old fan that needs replacing
For kitchens in and around Conyer, our emergency line runs 24/7.
Before you book anyone
- Whether VAT is included
- Whether a survey comes first
- Whether a written report and photos are included
- Whether they’re fully insured
How we price extract fan repair
Sites vary more than people expect. The main factors:
- The times the site is available
- How many systems or sites are involved
- Access, including roofs, risers and ceiling voids
- Site rules, permits and inductions
What you pay reflects the actual work. That is why every job is surveyed first, and the price is agreed before we start.
What we need to know
To speed up the quote, send us:
- How we’d reach plant on a roof or in a plant room
- Where the site is and what kind of site it is
- A few general shots of the system
- Any access panels or hatches you can see
For extract fan repair in Conyer, call 0345 646 2711 or use the quote form. Let us know the site type and the opening hours, plus pictures or the previous report if they’re to hand. A fixed quote typically follows within one working day.
More services for Conyer
The process
The visit has three parts: getting the area ready, doing the work and signing it off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and photos. Most of the time goes on the work itself, which takes anything from an hour or two to a full visit, depending on the fault. If the van will struggle with a lane or gateway near Conyer, let us know and we will plan around it.
- We start with the symptoms, such as rattling, humming, slow running or a fan that will not start.
- Power to the fan is isolated before we open the housing.
- Each part is checked in turn: motor, bearings, drive, impeller and fixings.
- You get our diagnosis and a fixed quote to repair or replace.
- Once the work is done, we run the fan and check it’s steady and quiet.
Getting ready for the visit
- Find the previous report, if there is one
- Plan for cooking equipment or plant to be off before we arrive
- Mention any parking or loading restrictions
Getting a quote
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work, before work begins.
Related advice
Extract fans in Conyer
The coast is only about 1 mile from Conyer. A fan exposed to sea air needs its fixings and housing checked more often than one inland. Environmental health officers from Swale council inspect food businesses in Conyer. Food premises are expected to have suitable and sufficient ventilation under food hygiene rules. A kitchen without a working fan has a problem to fix quickly. We cover Conyer, about 41 miles from central London, as part of our work across London and the South East. The visit is fixed around your opening hours, not ours.
Occasional-use kitchens, such as a hall kitchen near Church of St Mary or elsewhere in Conyer, are where a stiff or seized fan can turn up.
Conyer is about 4 miles east of Sittingbourne, in Kent. Conyer gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where needed and a written report with photos. Conyer is one of 922 places in Kent we cover for commercial clients. Our Maidstone page covers sites nearby (14 miles or so).
Postcode districts we cover here for extract fan repair: ME9. Whether your site is on North Quay and Conyer Road or anywhere close by, we can help. Other places close to Conyer include Teynham Street (1 mile south-east), Deerton Street (1 mile south-east), Teynham (1 mile south), Norton Ash (2 miles south) and Lewson Street (2 miles south). Larger places within reach include Maidstone (14 miles south-west), Ashford (15 miles south), Canterbury (12 miles south-east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (4 miles south-east).
Around Conyer
The nearest railway station is Teynham station, about 1.1 miles south of the centre. A little further out are Dolphin Sailing Barge Museum (3.1 miles west) and Castle Rough (2.8 miles west).
Managing agents and facilities teams in Conyer
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We can quote either party and send the paperwork to whoever needs it.
Records are where multi-site compliance often slips. Each visit produces a dated report with photos, so you can show an insurer or inspector what was done at each site.