Hampshire · Extract fan repair and replacement
Extract fan repair and replacement in Brook, Hampshire
We cover Brook for repair and replacement of kitchen extract fans, fan motors and worn fan parts. Fixed quotes, work around your opening hours and photo reports on every job.
- A motor that trips out or overheats
- Vibration spreading from the fan into the ducts
- A belt-driven fan that squeals
How we handle extract fan repair in Brook
Grease is hard on extract fans. A coated impeller spins unevenly, which shakes the bearings and mountings. That is why we check the grease whenever we work on a fan, and a full TR19® clean can be booked alongside. Typical jobs include a squealing belt on start-up and a dead fan motor, on bearings, belts and pulleys and kitchen extract fans.
A callout to a small place like Brook goes better when we know what we are looking at: photos of the fan, its rating plate and how to reach it all help.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Location
- Brook (SO43)
- Wider area
- Hampshire
- Reporting
- Written report with pictures
- Price
- A fixed quote up front
- When we work
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
How the visit works
The visit has three parts: set-up, the treatment itself and the sign-off. Set-up means sheeting and making equipment safe, while signing off means the written report and photos. The middle part takes longest, which takes part of a day for most faults, with a return visit if parts have to be ordered. A few pictures of the system help us make the most of a visit to a place like Brook.
- A visit is booked, in the evening or overnight if that suits.
- We isolate the extract and open the fan housing.
- We inspect every moving part and the fixings.
- We explain the options and quote a fixed price.
- The fan is repaired or replaced, then checked running.
How to prepare
- Move anything stored near the system
- Let us know when the site is closed or quiet
- Mention any parking or loading restrictions
How to get a quote
For a fixed quote, call 0345 646 2711 or send us an email with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You’ll usually have a quote within one working day.
Advice
How we price extract fan repair
There’s no set price list, because no two systems are the same. The quote depends on:
- The number of sites or systems
- Site requirements such as sign-in and permits
- The condition of the system
- One-off work versus a regular cycle
What you pay depends on how big the system is, the condition it’s in and access to every part of it. We give you a fixed price before any work starts, so there are no surprises.
Asking for a quote
Photos and a few facts are often enough to price the work. Useful things to send:
- Where the site is and what kind of site it is
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- When the site is open and when it’s quiet
- Where the plant sits or the system leaves the building, such as a roof or outside wall
We do not publish a price list, because every site is different. We look at your system first, from photos or on a visit, then send a fixed quote. To start, ring 0345 646 2711, or send details by email.
Looking after it afterwards
Aftercare is simple, and it helps at the next visit:
- Keep a record of any trips or stoppages
- Make sure the isolator and controls are easy to reach
- Make sure every filter is in place and clean
- Book regular TR19 cleaning, which includes the fan
Once we’re done, the extract is back in service. We leave the area tidy and explain anything you need to know.
A slipping belt or a loose mount is a small job. Ignored, they can lead to bigger failures, so it’s worth acting early.
Also in Brook
For landlords and multi-site operators
We regularly work with managing agents. Tell us the site, the work and the access arrangements, and we’ll send a fixed quote.
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party and send the paperwork to whoever needs it.
Your questions about extract fan repair in Brook
Which council inspects kitchens in Brook?
Food hygiene inspections in Brook are carried out by New Forest council. Inspections are risk-based, so a visit can come at any time, including the week a fan stops.
Do you work at weekends in Brook?
Yes, evening, overnight and weekend work is normal for us. That way a site in Brook doesn’t have to lose a day’s trading. When you call 0345 646 2711 or use the quote form, mention when the site is quiet.
Will you fit a new fan if ours can’t be repaired?
Yes. Where a fan is beyond repair, we replace it with one suited to the duct and the kitchen with a fixed price agreed before work begins.
Does a fan repair include cleaning the ductwork?
A repair deals with the fan, not the grease in the rest of the system. Grease on the fan usually means grease in the ducts and we can plan the two together.
Do you work in Brook?
Yes. We cover Brook and across Hampshire, within our South East and London area. For a fixed quote, call us on 0345 646 2711, or email photos.
What do you do with what you remove?
It leaves the site with us at the end of the visit. During the work, it’s contained to keep the area clean.
What does TR19 mean?
TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Do we need to close while you work?
Not normally. We need the work area to ourselves while we’re on site, so we book a time when it would be closed anyway.
Why act early in Brook
Weak extraction leaves heat, smoke and fumes in the kitchen. Staff work in hotter, steamier air, and more grease settles where it shouldn’t. Systems in rural buildings are often out of sight and out of mind.
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all play a part.
What you get with us
- We are fully insured
- Photo reports with every job
- Fixed quotes from a survey or photos
- A single point of contact for sites across the South East and London
Take a look at our cost guide or how to check a contractor.
Extract fans in Brook
Environmental health officers from New Forest council inspect food businesses in Brook. Food hygiene rules expect food premises to have suitable and sufficient ventilation. That is one more reason not to keep cooking with a broken fan.
Kitchens in Brook can call our 24/7 emergency line whenever an extract fan stops. Belts, bearings, motors and impellers are all checked when we look at a fan around Brook.
Brook is about 4 miles west of Totton, in Hampshire. Sites in Brook get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. Brook is one of 683 towns, villages and districts in Hampshire we cover for extract fan repair. We also work in Southampton, around 9 miles away.
Every address in SO43 is within our area for extract fan repair, from busy streets to back roads. If your site is just outside Brook, we cover Wittensford (1 mile east), Cadnam (1 mile east), Minstead (2 miles south), Newbridge (2 miles north-east) and Bramshaw (2 miles north). We also work in nearby towns such as Eastleigh (12 miles east), Totton (4 miles east), Chandler's Ford (11 miles north-east), Hedge End (13 miles east), Lymington (12 miles south) and Romsey (7 miles north-east).
Landmarks near Brook
We work in commercial kitchens and buildings around Green Dragon Inn and the streets around them. The closest station to Brook is Ashurst New Forest station, roughly 4.2 miles south-east. A little further out are Tatchbury Mount Hospital (3.5 miles east). The countryside around Brook includes Copythorne Common.
Different parts, different methods
Belt-driven fans
Squealing at start-up often points to a belt. Belts are checked for wear, tension and alignment and replaced if they’re worn.
Motors and bearings
Rumbling and grinding normally come from the bearings. We find out whether the bearings or the motor is at fault and then recommend the fix.
What extract fan repair can’t fix
It’s worth knowing the limits before booking:
- Grease build-up in the rest of the extract system
- Cooking smells reaching neighbours, which may need odour control
- Wiring and supply faults beyond the fan itself
If you are not sure, just give us a ring on 0345 646 2711, or send details by email and we will give you a straight answer before you book.
What the work covers
- Kitchen extract fans
- Roof and wall fans
- Bearings
- Belts and pulleys
- Fan housings
- Fan motors