Slough · Extract fan repair and replacement
Extract fan repair and replacement in Brands Hill, Slough
Looking for extract fan repair in Brands Hill? We diagnose first, fix the price and book the work around your hours, finishing with a written report and pictures.
- An overheating extract motor
- A fan worn beyond sensible repair
- A worn or slipping fan belt
Why act early in Brands Hill
An overloaded motor is under constant strain. That shortens its life and a burnt-out motor is a bigger job than a worn belt. Catching it early keeps the repair small. A planned visit to Brands Hill is easier to arrange than an emergency callout.
You will not find a price list here, because each job is priced on what it involves. Call for a fixed quote, and we will talk you through it.
Why us?
- Fully insured
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- CHAS and SafeContractor accredited, with ISO 9001
- Each visit written up, with photos
Read how cleaning jobs are priced and our accreditations and certificates.
Extract fan repair in Brands Hill
Our engineers handle all sorts of fan faults in Brands Hill, from a squeal at start-up to a fan that won’t run at all. We find the cause, give you a fixed price and fix it or fit a replacement when it’s beyond repair. We are often asked to deal with an extract fan that has stopped working and a squealing belt on start-up, on bearings, roof and wall fans and belts and pulleys.
In a small place like Brands Hill, fans are often on an outside wall or roof, open to wind and rain. Weather and grease together wear out motors and bearings.
Insurers, fire officers and environmental health officers all look at records. That is why every job is written up in a report with photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Where
- Brands Hill (SL3)
- Wider area
- Slough
- Paperwork
- Report and pictures after the visit
- Quote
- A fixed price before work begins
- Working hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Staff cleaning versus specialist work
For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. The inside of ducts and units needs a specialist.
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Different parts, different methods
Roof and wall-mounted fans
Fans are often mounted on roofs or external walls. Access affects how long a repair takes and we plan around it.
Direct-drive fans
Direct-drive fans have the impeller mounted straight on the motor. There are no belts, so faults tend to be in the motor, bearings or impeller.
Aftercare tips
Results last longer with the right care. We suggest:
- Note when the fan trips or cuts out
- Save our number for the 24/7 emergency line
- Keep the area around the fan controls clear
- Make sure every filter is in place and clean
Once the fan is running smoothly, keep the filters clean. Less grease on the impeller means less wear and fewer faults.
Small faults, like a worn belt, are quick to fix. Ignored, they can lead to bigger failures, so it’s worth acting early.
What happens on the day
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Equipment that has to be off is switched off and allowed to cool first, and floors and nearby surfaces are sheeted. On site, it takes part of a day for most faults, with a return visit if parts have to be ordered. Pictures of the system and its access let us plan the work in Brands Hill before we set off.
- First, you tell us the symptoms: noise, shaking, weak extraction or no power.
- Power to the fan is isolated before we open the housing.
- Each part is checked in turn: motor, bearings, drive, impeller and fixings.
- We explain the fault and give you a fixed price for the fix.
- We fix or replace the fan, then test it running before we leave.
Before we arrive
- Clear the space around the work
- Name a contact who can let us in at the agreed time
- Tell us where we can park and unload
Getting a quote
We do not publish a price list, because every site is different. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To start, give us a ring on 0345 646 2711, or send details by email.
Related advice
When a fan fails in Brands Hill
Food Standards Agency data counts about 25 cafés, restaurants and staff canteens and about 16 takeaways across Brands Hill and its immediate surroundings (about a mile and a half). Those that cook under a canopy rely on a fan that runs every hour they’re open. Food hygiene inspections in Brands Hill are the job of Windsor and Maidenhead council’s environmental health team. Food premises are expected to have suitable and sufficient ventilation under food hygiene rules. That is one more reason not to keep cooking with a broken fan. Brands Hill, about 19 miles from central London, is within our usual area. Visits are booked around your hours, evenings and weekends included.
If you look after a church or hall kitchen near Church of St Michael, or anywhere in Brands Hill, test the extract fan before a big event rather than on the day.
Brands Hill is about 3 miles south-west of West Drayton, in Slough. From the centre of Brands Hill to the outskirts, we cover extract fan repair for every kind of premises, from a single unit to a large public building. Brands Hill is one of 31 places in Slough where we work for commercial clients. Guildford is in our area too, around 16 miles away.
All of SL3 is covered for extract fan repair, from busy streets to back roads. Nearby, we also carry out extract fan repair in Horton (1 mile south), Colnbrook (1 mile east), Poyle (1 mile east), Sunnymeads (1 mile south-west) and Ditton (1 mile north-west). Within a short drive, we also cover Slough (4 miles north-west), Cippenham (5 miles north-west), Chalvey (4 miles north-west), Britwell (5 miles north-west), Upton (3 miles north-west) and Burnham (6 miles north-west).
Local landmarks in Brands Hill
Typical jobs here are in premises near Langley Grammar School, The Crown Public House And Attached Barn and Arthur Jacob Nature Reserve. The nearest railway station is Sunnymeads station, about 1.1 miles south-west. Nearby you’ll also find Windsor Castle (2.8 miles west) and Museum of Eton Life (3.1 miles west). Not far away are Uxbridge Moor and Staines Reservoirs.
Towns and villages near Brands Hill
Other services in Brands Hill
Fixed quotes for extract fan repair in Brands Hill
There’s no set price list, because sites vary so much. What we look at:
- Access, including roofs, risers and ceiling voids
- Site requirements such as sign-in and permits
- Working hours and out-of-hours timing
- The number of sites or systems
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
Helping us quote
When you contact us, these details help:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- The postcode and the type of business
- Your opening hours and when the area is out of use
- Wide photos of the system and the area around it
Want a quote for extract fan repair? Please call us on 0345 646 2711 or use the quote form and tell us about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
What we’re called out for in Brands Hill
Grease that gets past the filters ends up on the fan. Deposits gather on the blades, never quite evenly, and an unbalanced impeller shakes and starts to vibrate and rattle.
Keep an eye out for these warning signs:
- An overheating extract motor
- An extract fan that rattles or knocks
- An extract that vibrates through the ductwork
- A failed fan that needs a replacement
For school kitchens, at schools like Colnbrook Church of England Primary School for example, a planned fan repair in the holidays avoids losing lunches in term time.
Before you book anyone
- What happens if part of the system can’t be accessed
- When the next visit should be, and why
- If the quote is a fixed price or an estimate
- How VAT is shown on the quote
Questions from Brands Hill
Do you work overnight in Brands Hill?
Yes, nights and weekends are routine for us. Your customers, staff or residents in Brands Hill needn’t be disturbed. When you call 0345 646 2711, or email photos, mention when the site is quiet.
Will you come out to Brands Hill?
Yes, Brands Hill is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.
What if parts of the system cannot be reached?
They’re listed in the report, never skipped quietly. The report says which parts couldn’t be reached and why, along with a quote to put access in.
How much notice do you need?
That depends on the slot you want and the size of the job. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.
Do you survey before quoting?
Yes. We always survey first, either from pictures and details you send or on a site visit. A fixed quote follows.
Which records should we keep?
The reports and certificates from each visit, plus your own logs. They’re what an insurer, fire officer or EHO may ask for, so keep them where they can be found quickly.
What is TR19?
It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It covers how systems are inspected, cleaned and checked and expects a risk-based approach.
What accreditations do you have?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We have been trading since 2009 and we’re fully insured.