Hampshire · Extract fan repair and replacement

Extract Fan Repair in Blissford

Our technicians work in Blissford on extract fan repair and replacement. Fixed quotes, work around your opening hours and photo reports on every job.

  • A fan worn beyond sensible repair
  • A fan shaking on its mountings
  • Poor airflow at the canopy

Extract fan repair in Blissford

Extract fan repair for kitchens and businesses in Blissford

Everything a kitchen extract does depends on the fan. When it starts to rattle, hum or slow down, the kitchen gets hot and smoky very quickly. Our engineers track down the fault and fix it, by repairing the fan or replacing it. The work covers belts and pulleys, fan housings and fan motors, and common reasons people get in touch are a motor that trips out or overheats and a whining or grinding extract motor.

A callout to a small place like Blissford goes better when we know what we are looking at: a photo of the fan, the details on its label and the access arrangements help us plan.

For insurers and inspectors, the record counts. That is why every job is written up in a report with pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.

Five Duct Doctor technicians in navy uniforms with the company vans
Location
Blissford (SP6)
Wider area
Hampshire
Reporting
Report and pictures after the visit
Price
Fixed quote, normally within a working day
Working hours
Overnight and weekend work, 24/7 emergency callout
Telephone
0345 646 2711
Last updated
30 October 2026

What extract fan repair looks like in Blissford

Food Standards Agency data counts about 3 cafés, restaurants and staff canteens within roughly a mile and a half of the centre of Blissford. Wherever they cook under a canopy, a failed extract fan stops the kitchen. Environmental health officers from New Forest council inspect food businesses in Blissford. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. Getting the fan running again is the priority.

School kitchens can’t easily serve lunch without extraction, so if you look after one at a school like Hyde Church of England Primary School, fix a failing fan before term starts. A fan that rarely runs, like one in a hall kitchen near Church of the Holy Ascension or elsewhere in Blissford, can seize between uses.

Blissford is in Hampshire. We provide extract fan repair for commercial premises of every kind in Blissford and the rest of Hampshire. Blissford is one of 683 places in Hampshire we cover for commercial clients. You can also see our page for Southampton, roughly 16 miles from Blissford.

Extract fan repair in SP6 follows the same survey, fixed quote and written report as everywhere else we cover. Streets in the area include Blissford Hill, Blissford Cross and Abbots Well Road, all of which we cover for extract fan repair. We also cover Frogham (1 mile south), Hyde (1 mile south-west), Hungerford (1 mile south-west), Stuckton (1 mile west) and Criddlestyle (1 mile north-west). Further out, we also cover Totton (11 miles east), Lymington (14 miles south-east), Romsey (13 miles north-east), New Milton (12 miles south), Ringwood (5 miles south) and Barton on Sea (13 miles south).

Around Blissford

Locally, jobs take us to businesses close to The Fighting Cocks pub and The Burgate School and Sixth Form. Other landmarks nearby include Fordingbridge Doll Museum (1.6 miles west) and Godshill Castle Hill (1.8 miles north). Green spaces nearby include Blashford Lakes and Linbrook Lake.

Map of Blissford © OpenStreetMap contributors

The process

Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. The visit takes an hour or two to diagnose, then longer if parts or a new fan are needed. If the van will struggle with a lane or gateway near Blissford, let us know and we will plan around it.

  1. A visit is booked, in the evening or overnight if that suits.
  2. We isolate the extract and open the fan housing.
  3. Bearings, drive, impeller, motor and mounts are inspected.
  4. You hear whether repair or replacement makes sense, with a fixed quote.
  5. The fan is repaired or replaced, then checked running.

How to prepare

  • Allow time for equipment near the work to be turned off and cool down
  • Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
  • Make sure someone can let us in and lock up afterwards

Ask for a quote

Here’s what helps us quote: the address, the type of site and when it’s open, a few photos and any previous report or certificate. Then give us a ring on 0345 646 2711, or email photos.

Ask for a quote

Advice

Part by part

Belt-driven fans

Belt-driven fans have a motor that turns the impeller through belts and pulleys. Belts wear, stretch and slip, so we check the pulleys and bearings as well.

Impellers and housings

Where an impeller is bent or corroded, cleaning will not help. It may need replacing, or the fan may need replacing as a whole.

What happens if it’s left?

Some kitchens run a noisy fan on a lower speed to cut the noise. It hides the symptom and weakens the extract while the underlying wear continues. Diagnosing the fault properly is the lasting answer. In a small place like Blissford, a system that fails can take a site out of use.

What you pay depends on the size of the system, what state it’s in and how easy it is to reach. We give you a fixed price before we start, so you know where you stand.

Why us?

  • BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
  • Trading since 2009
  • We are fully insured
  • CHAS and SafeContractor accredited, with ISO 9001

Take a look at our cost guide or how to check a contractor.

Blissford: your questions answered

Will you come out to Blissford?

Yes, smaller places are covered as well as towns. The journey is planned ahead, so a few details about the route help.

Do you work overnight in Blissford?

Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. Your opening times are the first thing we ask for.

How much notice do you need?

That depends on the slot you want and the size of the job. Tell us your preferred dates when you ask for a quote, and if it’s an emergency, call us any time.

Can you supply and fit a replacement fan?

Yes. If repair isn’t sensible, we replace the fan. The replacement has to suit the ductwork and the cooking so we confirm that first.

Do you recommend a next date?

Yes. Every report includes a recommended date for the next visit, based on what we found and how the system is used.

Do we lose a day’s trading?

Not typically. We need the work area to ourselves while we are on site, so we book a time when it would be closed anyway.

Which accreditations do you hold?

BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We have been trading since 2009 and we are fully insured.

Can one contract cover all our sites?

Yes. Tell us the addresses and what each needs and we’ll quote them together.

In-house cleaning or a specialist?

Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.

If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.

When something else is needed

We won’t sell you work that doesn’t address the problem, so here are the limits:

  • Grease build-up in the rest of the extract system
  • Faults in the building’s electrical supply, which need an electrician
  • Problems with the gas supply or its interlock valve

Not sure which it is? You can give us a ring on 0345 646 2711 or use the quote form and we’ll tell you honestly.

What the work covers

  • Kitchen extract fans
  • Belts and pulleys
  • Bearings
  • Fan housings
  • Roof and wall fans
  • Fan motors

Looking after it afterwards

No system stays clean for ever, but care slows the build-up. A few tips:

  • Make sure staff know who to call if the fan fails
  • Book regular TR19 cleaning, which includes the fan
  • Keep the grease filters clean and fitted
  • Keep a record of any trips or stoppages

Your kitchen can get back to normal as soon as the fan is running. We clear up after ourselves and talk you through what we found.

A slipping belt or a loose mount is a small job. Left for months, they can damage the motor or bearings, so it’s worth acting early.

What affects the quote in Blissford

Some jobs are bigger than they look, and some smaller. What affects the quote:

  • When the work can happen, such as evenings, overnight or weekends
  • Where the site is and how we reach it
  • How big the system is
  • Any permits to work or inductions

Several systems or sites on one quote can make for a more efficient booking. Mention every system or site you need covered and we will price it together.

Asking for a quote

When you contact us, it’s useful to have:

  • Wide pictures of the system and the area around it
  • Detail shots of panels, filters and grilles
  • Where the site is and what kind of site it is
  • Your opening hours and when the area is out of use

Some systems can be priced from photos; others need a survey. Big or complicated sites, and systems that are hard to see in pictures, get a survey first. Either way, the quote is fixed before any work is booked.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London