Kent · Extract fan repair and replacement
Bethersden extract fan repair
Extract fan repair for Bethersden and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- A fan rattling in its housing
- A fan shaking on its mountings
- Weak extraction and a smoky kitchen
Extract fan repair in Bethersden
Before anything is ordered, we diagnose. We look at the motor, the belts or direct drive, the impeller and the mountings, along with the fan’s controls. Then you’re given a fixed quote for the repair or the replacement. The work covers fan housings, bearings and kitchen extract fans, and the jobs we see most are an extract fan that has stopped working and a humming noise from the fan motor.
A callout to a small place like Bethersden goes better when we know what we’re looking at: pictures of the fan, its rating plate and how to reach it all help.
The sign-off is always in writing: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Location
- Bethersden (TN26)
- Wider area
- Kent
- Reporting
- Written report with photos
- Quotes
- A fixed price before we start
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Questions from Bethersden
Can you come to Bethersden after we close?
Yes, nights and weekends are routine for us. The site is handed back ready to open. Just call us on 0345 646 2711 or email us with your opening times and we will plan around them.
Is there an emergency callout for extract fans in Bethersden?
Bethersden is covered, and our emergency callout runs 24/7. Phone 0345 646 2711 and we will talk through the fault and access. Let us know whether the fan is silent, noisy or tripping the power.
What happens to the waste?
We take it away at the end of the visit. During the work, it’s contained to keep the area clean.
What accreditations do you have?
We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
Is there a survey before the work?
Yes. We always survey first, from your pictures and details, or with a visit where necessary. A fixed quote follows.
What does TR19 mean?
TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
What if parts of the system cannot be reached?
We never leave them off the paperwork. You will know exactly which parts weren’t reached and why, and we can quote to improve the access.
Why is our extract fan so noisy?
Noise normally comes from grease build-up, bearings, belts or loose fixings. Rattles, whines and grinding point to different faults and we find the exact cause on site.
Looking after it afterwards
To keep the system working properly between visits:
- Don’t wait for a noisy fan to stop
- Make sure the isolator and controls are easy to reach
- Keep a record of any trips or stoppages
- Keep all filters fitted while cooking
Your kitchen can get back to normal as soon as the fan is running. We leave the area tidy and talk you through what we found.
When filters block, the fan works harder. Keeping filters clean eases the strain and helps prevent overheating.
Multi-site and managed buildings
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements, and we will send a fixed quote.
Facilities teams in offices, schools and healthcare sites book us too in Bethersden and across Kent. Larger estates can be phased building by building around the people who use them.
How the job changes from site to site
Roof and wall-mounted fans
An external fan faces the weather as well as the grease. Rust on fixings and housings is a frequent find.
Fan controls
Speed controllers and isolators sit between the supply and the fan. A control fault can leave the fan dead or stuck at one speed.
Staff cleaning versus specialist work
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they don’t reach the grease that builds up further in. That part needs specialist access and equipment.
Do you need extract fan repair in Bethersden?
Grease that gets past the filters ends up on the fan. Deposits gather on the blades, never quite evenly, and an unbalanced impeller shakes and the noise follows.
These are the problems we see most often:
- A fan that whines, hums or grinds
- An extract fan that has stopped working
- A worn or slipping fan belt
- A knocking noise from the extract fan
If you look after a church or hall kitchen near Church of St Margaret, or anywhere in Bethersden, test the extract fan before a big event rather than on the day.
Comparing quotes
- What hours they’ll be on site
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- If the quote is a fixed price or an estimate
- Whether the whole system is included, or only the parts that are easy to reach
What extract fan repair looks like in Bethersden
Bethersden, about 45 miles from central London, is within our usual area. Evening, overnight and weekend visits are all possible. It’s Ashford council that sends environmental health officers to food businesses in Bethersden. Food premises are expected to have suitable and sufficient ventilation under food hygiene rules. So a failed fan is worth fixing before the next service, not the next month.
For school kitchens, at schools like Bethersden Primary School for example, a planned fan repair in the holidays avoids losing lunches in term time.
Bethersden is about 5 miles west of Ashford, in Kent. Bethersden gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with photos. We cover 922 places across Kent, from busy centres to quieter spots. There’s also a page for Maidstone, about 14 miles away.
Extract fan repair in TN26 is surveyed, quoted and booked the same way as anywhere else. That includes premises on The Dene, Forge Hill and Forgefield and the roads around them. We also cover the places around Bethersden: Wissenden (1 mile north-west), Further Quarter (2 miles west), Chambers' Green (2 miles north), Maltman's Hill (2 miles north-west) and High Halden (3 miles south-west). Larger places within reach include Maidstone (14 miles north-west), Ashford (5 miles east), Sittingbourne (15 miles north), Faversham (14 miles north-east), Hythe (15 miles east) and Davington (14 miles north-east).
What’s near Bethersden
We work in commercial kitchens and buildings around The George Public House and the streets around them. For rail, the closest station is Pluckley station, roughly 2 miles north. A little further out are Woodchurch Village Life Museum (3.1 miles south) and Romden Castle (2.4 miles north-west). Green spaces nearby include Orlestone Forest.
Also near Bethersden
What else we do in Bethersden
Why act early in Bethersden
Wherever the kitchen is, Bethersden included, the fan often sits on an outside wall or roof, so its noise does not stay in the kitchen. Dealing with the fault brings the noise back down before it becomes a nuisance. Equipment tucked in a roof space or outbuilding near Bethersden rarely gets looked at unless someone books it.
The price reflects the work, not guesswork. That’s why every job is surveyed first, and the price is agreed before work begins.
Why Bethersden businesses choose us
- Fixed quotes from a survey or pictures
- Ventilation hygiene specialists since 2009
- CHAS and SafeContractor accredited, with ISO 9001
- We’re fully insured
Read our cost guide and our accreditations and certificates.
What we do, step by step
Your trading hours come first. We book the visit for a time the area is closed, whether that is an evening, overnight or a weekend. Once we’re in, the area is sheeted and anything that has to be off is turned off and cooled, and the job takes an hour or two to diagnose, then longer if parts or a new fan are needed. If the van will struggle with a lane or gateway near Bethersden, let us know and we’ll plan around it.
- We start with the symptoms, such as rattling, humming, slow running or a fan that will not start.
- Power to the fan is isolated before we open the housing.
- Each part is checked in turn: motor, bearings, drive, impeller and fixings.
- You get our diagnosis and a fixed quote to repair or replace.
- Once the work is done, we run the fan and check it’s steady and quiet.
How to prepare
- Move anything stored near the system
- Tell us about site rules, permits or sign-in
- Name a contact who can let us in at the agreed time
Get a fixed quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.