Oxfordshire · Extract fan repair and replacement
Extract fan repair and replacement in Albury, Oxfordshire
One call covers extract fan repair and replacement in Albury: survey, fixed quote, work and sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Vibration spreading from the fan into the ducts
- A dead fan motor
- An old fan that needs replacing
Extract fan repair in Albury
The extract fan is what pulls smoke, heat and steam out of the kitchen. Once it turns noisy, sluggish or stops altogether, the cooking area soon fills with heat and fumes. We find out why and put it right with a repair or a replacement. The work covers fan housings, belts and pulleys and roof and wall fans, and common reasons people get in touch are a knocking noise from the extract fan and an old fan that needs replacing.
In a small place like Albury, fans are often on an outside wall or roof, open to wind and rain. Weather and grease together wear out motors and bearings.
The sign-off is always in writing: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Where
- Albury (OX9)
- Region
- Oxfordshire
- Reporting
- Written report with pictures
- Quote
- A fixed price before work begins
- Working hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
Albury: your questions answered
Can you come to Albury after we close?
Yes. We work evenings, overnight and at weekends. The work in Albury can fit around your hours. Your opening times are the first thing we ask for.
Do you cover smaller places like Albury?
Yes, we work in villages as well as towns, and Albury is covered. Just mention lanes, gates or anything else about the site when you book.
How far ahead should we book?
For planned work, earlier is better, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.
Will I get paperwork for my records?
Yes, on every job. It’s a dated, written report with pictures, plus a certificate via the BESCA Vent Hygiene Elite portal for TR19® Grease cleans. Keep it in your maintenance log.
Does the report say when we need you again?
Yes. We put a recommended next date on the report. For kitchen extracts, BESA’s minimum intervals run from every 3 months for heavy use to every 12 months for light use, and fire dampers need testing at least once a year.
Will we have to shut during the visit?
Not normally. We work when the area is out of use, such as evenings, overnight, early mornings or weekends, so the site can carry on as normal.
Which records should we keep?
Everything that shows the system is looked after: our reports and photos, any certificates and your in-house logs. One maintenance log per site keeps it simple.
Do you have insurance?
Yes. We carry full insurance, and we have been trading since 2009.
Nearby places to Albury
More services for Albury
Keeping the system healthy
Looking after the system between visits is straightforward, and it helps at the next visit:
- Make sure the fan is cleaned with the rest of the system
- Keep the area around the fan controls clear
- Report new noises from the fan early
- Keep a record of any trips or stoppages
Grease on the fan usually means grease in the duct as well. We can book a TR19® clean of the whole extract, with a certificate and photo report.
When filters block, the fan works harder. Changing or cleaning them on time takes load off the motor and helps prevent overheating.
What the work involves, part by part
Motors and bearings
An overheating motor is a warning sign. It may be straining against blocked filters or ducts, or the motor itself may be failing.
Fan controls
Speed controllers and isolators sit between the supply and the fan. When they fail, the fan may not start or may run at the wrong speed.
When it’s something else
Before booking, it helps to know what’s not included:
- Faults on the gas side of an interlock system, which need a Gas Safe registered engineer
- Problems with the electrical supply to the fan (an electrician’s job)
- An extract system that was undersized from the start
If you are not sure, just call us on 0345 646 2711 or drop us a line and we will give you a straight answer.
Parts of the system we cover
- Bearings
- Fan housings
- Kitchen extract fans
- Fan motors
- Roof and wall fans
- Belts and pulleys
Extract fans in Albury
Environmental health officers from Buckinghamshire council inspect food businesses in Albury. Ventilation is part of food hygiene law, which expects it to be suitable and sufficient. Getting the fan running again is the priority. At about 44 miles from central London, Albury sits well inside the area we cover. Visits are booked around your hours, evenings and weekends included.
A fan that rarely runs, like one in a hall kitchen near Church of St Helen or elsewhere in Albury, can seize between uses. Around Albury, a failed fan can be reported day or night on our 24/7 line.
Albury is about 4 miles west of Thame, in Oxfordshire. Sites in Albury get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. Our Oxfordshire coverage runs to 443 places, Albury among them. Our Oxford page covers sites nearby (8 miles or so).
Work in OX9 is surveyed, quoted and booked the same way as anywhere else. Whether your site is on Oxford Road, Ickford Road and Albury View or anywhere close by, we can help. Nearby, we also carry out extract fan repair in Tiddington (1 mile west), Draycott (1 mile north-west), Milton Common (1 mile south), Little Ickford (1 mile north) and Shabbington (1 mile north-east). Further out, we also cover Oxford (8 miles west), Didcot (12 miles south-west), Bicester (12 miles north), Abingdon-on-Thames (11 miles south-west), Thame (4 miles east) and Kidlington (11 miles north-west).
Near you in Albury
Around Albury, our work takes us to kitchens and buildings near The Fox Inn, among other places. Well-known places in the area include Waterperry Gardens Rural Museum (1.7 miles north-west) and Thame Community Hospital (3.6 miles east). For a walk, there’s Wells Farm.
How we price extract fan repair
The price is fixed before any work begins. It’s based on:
- One-off work versus a regular cycle
- Where the site is and how we reach it
- How many systems or sites are involved
- The size of the system
We do not list prices on the website, because the cost depends on the site in front of us. Call for a fixed quote, and we’ll talk you through it.
What we need to know
To help us quote quickly, send us:
- The roof, plant room or outside wall the system runs to
- Detail shots of panels, filters and grilles
- Any previous report or certificate
- Your opening hours and when the area is out of use
Getting a quote does not take long. Send a few details and photos, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Why it’s worth doing now in Albury
A struggling motor runs hotter and works harder. Every hour of strain takes its toll and a burnt-out motor is a bigger job than a worn belt. Catching it early keeps the repair small. In a small place like Albury, a system that fails can take a site out of use.
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will go through it with you.
Why book with us
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Fixed quotes, typically within one working day
- CHAS, SafeContractor and ISO 9001
- One contact for all your sites in London and the South East
Take a look at what affects the cost or how to check a contractor.
Staff cleaning versus specialist work
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you cannot see still need a specialist at the right interval.
How it works
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the work takes part of a day for most faults, with a return visit if parts have to be ordered. We agree a date with you, plan the drive to Albury and turn up when the site is quiet.
- You describe the fault and we arrange a visit.
- On site, the fan is safely isolated.
- The fan and its controls are checked to pin down the fault.
- A fixed quote for the repair or replacement follows.
- We fix the fault and run the fan to check it.
How to prepare
- Let us know about parking and loading
- Make sure someone can let us in and lock up afterwards
- Let us know how we reach the system, including roofs, risers and plant rooms
How to get a quote
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before any work starts.