Hampshire · Extract fan cleaning

Extract fan cleaning in Hyde, Hampshire

Extract fan cleaning for commercial sites in Hyde and across Hampshire. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.

  • Grease escaping from the fan outlet
  • A fan coated in grease inside its housing
  • A noisy fan that has got louder over time

Need extract fan cleaning in Hyde?

About our extract fan cleaning in Hyde

A fan never collects grease in a neat, even layer. Heavier deposits on some blades throw the impeller off balance, which brings vibration, noise and extra wear on the bearings and motor. A thorough clean removes the cause. If you are dealing with grease stains around the discharge and burning smells from the fan area, we can help.

Work in a small place like Hyde starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.

A written report with pictures follows each visit, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.

Before and after view down the inside of a rectangular extract duct
Place
Hyde (SP6)
Wider area
Hampshire
Records
TR19® certificate and photo report
Price
Fixed quote, usually within a working day
Working hours
Overnight and weekend work, 24/7 emergency callout
Call
0345 646 2711
Checked
30 October 2026

Why deal with it now?

An unbalanced fan gets worse, not better. It wears bearings and mounts and can lead to a breakdown, which may leave the kitchen without extraction. A planned clean beats an emergency. Our emergency line runs 24/7, but a planned visit to Hyde is calmer for everyone.

One small site or a whole estate, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before any work starts.

Why Hyde businesses choose us

  • CHAS and SafeContractor accredited, with ISO 9001
  • Trading since 2009
  • A single point of contact for sites across the South East and London
  • Work around your opening hours, with 24/7 emergency cover

Take a look at our cost guide and our accreditations and certificates.

Looking after it afterwards

So the system stays in good health:

  • Keep the fan on whenever the range is lit
  • Look for grease stains near the discharge
  • Listen for new noises or vibration from the fan
  • Keep the grease filters clean and in place

When we have finished, the fan is reassembled and run. Anything we notice, like noise, vibration or a worn part, goes on the report, so you can plan any repair.

Listen to the fan. Rattles, hums or shaking can be early signs of build-up or wear, and catching it early keeps it a cleaning job.

What happens on the day

There’s very little for your team to do on the day. A contact on site lets us in at the agreed time and points us to the system, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. We agree a date with you, plan the drive to Hyde and turn up when the site is quiet.

  1. The fan is found and its type, access and isolation checked.
  2. We isolate the power before opening the housing.
  3. Grease is scraped off the impeller blades and casing.
  4. The fan is degreased, taking care around the motor.
  5. It’s closed up, run, checked and photographed for the report.

How to prepare

  • Arrange a key holder or contact on site
  • Tell us where we can park and unload
  • Let us know how we reach the system, including roofs, risers and plant rooms

Getting a quote

Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, the quote is fixed before any work is booked.

Ask for a quote

Advice

How the job changes from site to site

Fan housings and motors

The housing around the impeller catches grease flung off the blades. It’s scraped and degreased with the impeller.

Impellers and blades

The impeller is the spinning part that moves the air, and grease builds up on them unevenly. An uneven coating throws it off balance, so it’s cleaned carefully blade by blade.

What your team can do, and what needs us

A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.

For ventilation and air handling systems, in-house care is mostly about checks: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.

Extract fan cleaning around Hyde

The FSA’s data shows about 4 pubs and bars registered within 1.5 miles or so of the middle of Hyde. A pub or hotel kitchen that cooks every day builds up grease in its extract like any other. Food hygiene inspections in Hyde are the job of New Forest council’s environmental health team. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Keeping each certificate and photo report on file helps show the extract is looked after. Hampshire and Isle of Wight Fire and Rescue Service covers Hyde. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.

Breamore House, about 4.4 miles north, is one of the historic houses near Hyde; if you run event catering at a venue like that, cleans can be booked between functions. Bursars and site managers at schools such as Hyde Church of England Primary School tend to book extract cleaning for when the kitchen is empty. Volunteers running a hall kitchen near Church of the Holy Ascension, or anywhere in Hyde, may not know when the extract was last cleaned, and a grease test settles it.

Hyde is in Hampshire. Whether your site is in the middle of Hyde or further out, extract fan cleaning is available to all kinds of commercial premises, from a single unit to a large public building. Our Hampshire coverage runs to 683 places, and Hyde is one of them. We also work in Southampton, about 16 miles from Hyde.

We cover every part of the SP6 postcode area for extract fan cleaning and the streets around it. If you need extract fan cleaning at premises on Gorley Lynch and Hyde Lane or anywhere close by, our technicians can take on the work. Neighbouring places we cover for extract fan cleaning include Hungerford (1 mile west), Frogham (1 mile north-east), North Gorley (1 mile west), Blissford (1 mile north-east) and Stuckton (1 mile north-west). We also work in nearby towns such as Totton (11 miles east), Lymington (14 miles south-east), Romsey (13 miles north-east), New Milton (12 miles south-east), Ringwood (4 miles south) and Barton on Sea (12 miles south).

Landmarks near Hyde

We work in commercial kitchens and buildings around The Burgate School and Sixth Form and the streets around them. Nearby you will also find Godshill Castle Hill (2.5 miles north) and Fordingbridge Doll Museum (1.7 miles north-west). The countryside around Hyde includes Blashford Lakes and Linbrook Lake.

Map of Hyde © OpenStreetMap contributors

Honest limits

We won’t sell you work that doesn’t address the problem, so here are the limits:

  • A motor that has burnt out
  • A fan that’s too small for the system (a design question)
  • Damaged fan blades

If you are not sure, just ring 0345 646 2711 or email us and we’ll give you a straight answer before booking.

Where we work

  • Discharge points
  • Centrifugal fans
  • Fan housings
  • Axial fans
  • In-line fans
  • Roof-mounted fans

Your questions about extract fan cleaning in Hyde

Who would carry out a food hygiene inspection at a kitchen in Hyde?

In Hyde, it’s New Forest council that carries out food hygiene inspections. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.

Do you cover smaller places like Hyde?

Yes, Hyde is part of our area, however small the site. Let us know about access, parking and anything unusual about getting there when you book.

Who is responsible for fire safety on the premises?

That depends on who controls the premises. Under the Fire Safety Order 2005, it’s the responsible person, which can be the employer, the owner, a landlord, an FM or a managing agent.

How long does extract fan cleaning take?

A single accessible fan does not take long, but hard-to-reach fans take more time. We plan it out of hours.

How do you protect the area?

We start with protection: floor sheeting and covers over nearby surfaces and equipment. We tidy up and take our waste away before we leave.

Why is my extract fan noisy?

Grease on the blades and housing is one of the usual causes, since uneven grease makes it run out of balance. Worn bearings and motor problems are others, which our report will flag.

Are you insured?

Yes. Full insurance covers our work and have been trading since 2009.

Do you survey before quoting?

Yes. We always survey first, either from pictures and details you send or on a site visit. A fixed quote follows.

For landlords and multi-site operators

Facilities teams in offices, schools and healthcare sites book us too across Hampshire. Work can be phased by floor, building or site around the people who use them.

Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London