Hertfordshire · Extract fan cleaning
Extract Fan Cleaning in Chipping
One call covers extract fan cleaning in Chipping, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- A fan coated in grease inside its housing
- A fan that no longer moves enough air
- An extract fan that vibrates or rattles
Looking after it afterwards
Looking after the system between visits is straightforward, and it makes the next visit easier:
- Note any drop in extraction at the canopy
- Leave a clear route to the fan
- Check filters are seated before cooking
- Don’t turn the fan off mid-service
When we’ve finished, the fan is reassembled and run. If anything seems wrong, from vibration to wear, we note it, so you can plan any repair.
Fewer grease particles reaching the fan means less build-up. Keep the grease filters clean, fitted and in place, and replace any that are damaged.
Extract fan cleaning in Chipping, done properly
Is the extract fan louder than it used to be, or the airflow weaker? Tell us about it when you give us a ring on 0345 646 2711 or use the quote form, and you will get a fixed price, usually within one working day. The work covers centrifugal fans, axial fans and fan housings, and people most often call us about a heavily greased fan housing and rough running from the extract fan.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
For insurers and inspectors, the record counts. So every job comes with a written report and pictures, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Place
- Chipping (SG9)
- Wider area
- Hertfordshire
- Records
- Certificate plus before-and-after photos
- Quotes
- A fixed quote up front
- Working hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Common problems we fix in Chipping
Each blade collects a slightly different amount. The difference throws the impeller off balance, wearing bearings and mounts. What starts as a grease problem can become a mechanical one.
The symptoms we are asked about most include:
- Vibration from an unbalanced impeller
- Grease around the motor and its mounts
- Hot, greasy smells near the fan
- A fan that no longer moves enough air
In and around Chipping, every reachable section of the extract is cleaned, and anything we can’t reach goes on the report.
What your quote should include
- Whether VAT is included
- Proof of accreditation you can verify
- Whether they’re fully insured
- How they set the interval to the next visit
In-house cleaning or a specialist?
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
Common questions in Chipping
Do you work at weekends in Chipping?
Yes, nights and weekends are routine for us. The work in Chipping can fit around your hours. When you give us a ring on 0345 646 2711, or send details by email, mention when the site is quiet.
Do you clean school canteen extracts around Chipping out of term?
Yes. Half-terms and the summer break are the natural time for school work. With about 3 schools and colleges on the FSA’s register within roughly a mile and a half of Chipping, it pays to plan holiday dates ahead. Tell us your holiday dates and we’ll book the visit for when the site is empty.
Should the extract fan be cleaned as part of TR19?
Yes, a full TR19 clean includes the fan. Anything that cannot be reached is recorded, so the record is accurate.
What should I send you?
The site address, the type of premises and your opening hours, along with a few photos and any previous report.
How much does extract fan cleaning cost?
It depends on the site, so we quote each one individually. To get one, give us a ring on 0345 646 2711 or send us an email with the site type, opening hours and a few pictures.
How long does extract fan cleaning take?
A single accessible fan doesn’t take long, while fans on high roofs or in tight voids take longer. We plan it out of hours.
Will I get pictures of the cleaned fan?
Photos, notes on condition and a recommended next date. Keep it with your maintenance log.
What if parts of the system can’t be reached?
We never leave them off the paperwork. The report says which parts couldn’t be reached and why, along with a quote to put access in.
What extract fan cleaning cannot fix
Some problems need a different service or another trade:
- A cracked or broken impeller (it needs replacing)
- A dirty duct upstream of the fan
- Electrical faults in the fan’s supply or controls (an electrician’s job)
If in doubt, call 0345 646 2711 or drop us a line and we’ll say what we think.
What we work on in Chipping
- Axial fans
- Fan housings
- Roof-mounted fans
- Centrifugal fans
- Discharge points
- In-line fans
What we do, step by step
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes a couple of hours per fan, depending on its size and the build-up. For a village or hamlet like Chipping, tell us about narrow lanes, gates and parking when you book.
- The fan is found and its type, access and isolation checked.
- It’s isolated so it can’t run while we work.
- We scrape the heavy grease from the blades and housing.
- The fan is degreased, taking care around the motor.
- It’s closed up, run, checked and photographed for the report.
Preparing for the visit
- Move anything stored near the system
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Have your last certificate or report to hand
Get a fixed quote
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. Then we send a fixed price so you know the cost before we start.
Advice
Extract fan cleaning in Chipping: the local picture
The FSA’s food hygiene register includes about 5 pubs, bars and clubs within about 1.5 miles of central Chipping. Where they serve hot food, their kitchen extracts need cleaning to TR19® like any restaurant’s. Chipping is covered by Hertfordshire Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. Kitchens in Chipping get their food hygiene inspections from East Hertfordshire council. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A dated certificate in the maintenance file answers the question before it’s asked.
School kitchens, at schools like Freman College for example, are typically cleaned in the holidays so no lunches are lost.
Chipping is in Hertfordshire. We carry out extract fan cleaning for businesses, landlords and public buildings in Chipping and the rest of Hertfordshire. Chipping is one of 381 places in Hertfordshire we cover for commercial clients. For sites nearby, see our Chelmsford page, about 27 miles away.
All of SG9 is covered for extract fan cleaning, from busy streets to back roads. Close by, we work in Wyddial (1 mile east), Buckland (1 mile north), Throcking (1 mile south-west), Layston (1 mile south-east) and Buntingford (2 miles south-east). Larger places within reach include Stevenage (8 miles south-west), Bishop's Stortford (11 miles south-east), Welwyn Garden City (13 miles south-west), Hitchin (10 miles west), Hoddesdon (15 miles south) and Hertford (12 miles south).
What’s near Chipping
Locally, jobs take us to businesses close to The Countryman pub. Other landmarks nearby include Anstey Hales Farm (3.8 miles east). The countryside around Chipping includes Hawkins Wood.
How we price extract fan cleaning
You’ll get a fixed price before we start. It’s based on:
- The times the site is available
- Travel, parking and unloading
- Access, including roofs, risers and ceiling voids
- One-off work versus a regular cycle
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
What to send for a quote
Before you ask for a quote, gather:
- A few general shots of the system
- When the site is open and when it’s quiet
- The paperwork from the last visit, if you have it
- The roof, plant room or outside wall the system runs to
Need a price for extract fan cleaning? Please call us on 0345 646 2711 or email us and tell us about the site. We will talk you through the work and give you a fixed quote before anything is booked.
More services for Chipping
Multi-site and managed buildings
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.