Kent · Extract fan cleaning
Bluetown extract fan cleaning
For cleaning of kitchen extract fans, impellers, fan housings and discharge points in Bluetown, one call is all it takes, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Grease around the motor and its mounts
- A noisy fan that has got louder over time
- An extract fan with no cleaning record
Keeping the system healthy
Aftercare is simple, and it helps at the next visit:
- Keep access to the fan clear
- Look for grease stains near the discharge
- Check filters are seated before cooking
- Book the fan into every full TR19 clean
When the fan is cleaned as part of a full TR19® Grease clean, a TR19 certificate is issued through the BESCA Vent Hygiene Elite portal. If only the fan is cleaned, the photo report says so.
A change in how the fan sounds is worth noting. New noise or vibration often means grease is building on the impeller and early action can save a repair.
Extract fan cleaning in Bluetown, done properly
The fan is cleaned as part of every full TR19® Grease clean, but a fan can also need attention on its own, for example when it’s noisy or vibrating. A fan-only clean is recorded as exactly that. If you’re dealing with grease stains around the discharge and burning smells from the fan area, we can put it right.
Work in a small place like Bluetown starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
Nothing is signed off by word of mouth: a written report, dated and illustrated with pictures, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.
- Where
- Bluetown (ME9)
- Region
- Kent
- Records
- Certificate and photo report
- Quotes
- A fixed price before we start
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Questions from Bluetown
Can you get to a site in Bluetown?
Yes. Villages and rural sites across the South East are part of our work, Bluetown included. Just mention lanes, gates or anything else about the site when you book.
Which environmental health team covers Bluetown?
In Bluetown, it’s Swale council that carries out food hygiene inspections. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
What types of premises do you cover?
Any commercial site with kitchens or ventilation, from a small pub to a hospital. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.
Is there a survey before the work?
Yes. Photos often do the job, while bigger or harder-to-see systems are surveyed on site.
Who is responsible for fire safety on the premises?
That depends on who controls the premises. The Fire Safety Order 2005 puts the duty on the responsible person, which can be the employer, the owner, a landlord, an FM or a managing agent.
What happens to the waste?
Anything we remove is contained as we work and taken away with us, including grease, debris and dirty water. We don’t leave it behind.
Do you work out of hours?
Yes. Tell us your opening hours when you ask for a quote and we’ll plan the visit around them.
Can the fan be cleaned between full cleans?
Yes, we can clean just the fan. That helps when the fan needs attention before the next full clean, but it does not replace a full TR19 clean.
Why it’s worth doing now in Bluetown
Grease on the impeller makes the fan less efficient. Less air is pulled from the kitchen, so heat and smoke linger and the motor works harder. Rural sites cannot always move to another kitchen or room when something fails.
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all make a difference.
Why choose Duct Doctor in Bluetown
- A fixed price before any work starts
- Survey first, then a fixed quote
- Full insurance on every job
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Take a look at our cost guide or how to check a contractor.
How we price extract fan cleaning
You’ll get a fixed price before we start. It takes into account:
- Whether several sites go on one quote
- How easy every part is to reach
- Any permits to work or inductions
- The condition we find in the survey
Combining work into one visit or one programme can make for a more efficient booking. Tell us about everything you’d like looked at, and you will get one fixed quote.
Helping us quote
Photos and a few facts are often enough to price the work. Send what you can of the following:
- Close-ups of filters, grilles, hatches or access panels
- Problems your staff have spotted
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Wide photos of the system and the area around it
Quotes are quick. Call or email with a few details and you will typically have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
How the job changes from site to site
Impellers and blades
Coated blades move less air. We clean each blade back to its surface, so the fan can run as intended.
Fan housings and motors
Motors and their electrics are kept dry and treated with care, and the fan is isolated throughout. Grease on and around the motor can trap heat, so the surrounding area is cleaned carefully.
Towns and villages near Bluetown
Other services in Bluetown
Extract fan cleaning in Bluetown: the local picture
Bluetown, about 39 miles from central London, is within our usual area. Evening, overnight and weekend visits are all possible. Environmental health officers from Swale council inspect food businesses in Bluetown. Extraction counts as kitchen equipment, so its condition can come up on the day. Keeping each certificate and photo report on file helps show the extract is looked after.
A hall kitchen that only cooks for events, whether near Church of St Catherine or elsewhere in Bluetown, still needs its extract cleaned, just less often. Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Belmont House and Gardens is about 4.4 miles east), access may need planning. Bursars and site managers at schools such as Milstead and Frinsted Church of England Primary School tend to book extract cleaning for when the kitchen is empty.
Bluetown is about 4 miles south of Sittingbourne, in Kent. Wherever you are in the ME9 postcode area, we can take on extract fan cleaning. Bluetown is one of 922 towns, villages and districts in Kent where we work for extract fan cleaning. Our Maidstone page covers sites nearby, about 10 miles away.
We work across the ME9 postcode area for extract fan cleaning and the streets around it. Close by, we work in Hollybushes (1 mile west), Milstead (1 mile north-west), Doddington (1 mile south-east), Wichling (1 mile south) and Frinsted (2 miles west). Larger places within reach include Maidstone (10 miles west), Ashford (12 miles south-east), Canterbury (14 miles east), Sittingbourne (4 miles north), Whitstable (13 miles east) and Faversham (6 miles east).
Near you in Bluetown
In Bluetown, that means kitchens and buildings near Cromers Wood, among other places. The nearest railway station is Sittingbourne station, roughly 3.6 miles north of the centre. Nearby you’ll also find Newnham Castle (2.4 miles east) and Sittingbourne Heritage Museum (3.4 miles north).
What happens on the day
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Equipment that has to be off is switched off and allowed to cool before work begins, and floors and nearby surfaces are sheeted. The work itself takes an hour or two for one fan, longer when it’s hard to reach. Pictures of the system and its access let us plan the work in Bluetown before we set off.
- We locate the fan and plan how to reach and isolate it.
- It’s isolated so it cannot run while we work.
- Grease is scraped off the impeller blades and casing.
- Blades, housing and surrounds are degreased with care around the electrics.
- It’s closed up, run, checked and photographed for the report.
Before we arrive
- Mention any locked doors, roof access or ceiling voids
- Clear loose items from the work area
- Let us know about permits to work or site inductions
Ask for a quote
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Related advice
Landlords, agents and facilities managers
Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We can quote either party, and the report can go to both.
Whether it’s one building or many, the standard is the same: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
What your team can do, and what needs us
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.