Kent · Extract fan cleaning
Extract fan cleaning in Bay View, Kent
Looking for extract fan cleaning in Bay View? We survey first, give you a fixed quote and work around your opening hours, finishing with a written report and pictures.
- Vibration from an unbalanced impeller
- A smell of hot grease from the extract
- Fat spreading onto the roof or wall by the fan
What happens on the day
We start by comparing what we find with the survey or your photos. Anything unexpected is raised with you before we go further. From there, it takes a few hours where there are several fans or heavy deposits. Somewhere as small as Bay View, the date and timings are agreed with you well before the day.
- We locate the fan and plan how to reach and isolate it.
- It’s isolated so it cannot run while we work.
- We scrape the heavy grease from the blades and housing.
- Blades, housing and surrounds are degreased with care around the electrics.
- We reassemble, run and photograph the fan.
Before we arrive
- Tell us where we can park and unload
- Name a contact who can let us in at the agreed time
- Plan for cooking equipment or plant to be off before we arrive
How to get a quote
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work, before any work starts.
Related advice
Extract fan cleaning in Bay View, done properly
Any fan serving a kitchen in Bay View is cleaned the same careful way as anywhere else: we isolate it, open the housing, scrape the impeller and degrease the lot. Your report shows the impeller as we found it and as we left it. The work covers discharge points, in-line fans and centrifugal fans, and common reasons people get in touch are a fan shaking on its mounts and fat spreading onto the roof or wall by the fan.
In a village or hamlet like Bay View, the kitchens that need extract cleaning are typically a pub, a school, a care home or a hall kitchen, wherever there is one. Each still has a canopy and duct that collect grease.
Accreditations are easy to claim and worth checking. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
- Place
- Bay View (ME12)
- Wider area
- Kent
- Records
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- Working hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Extract fan cleaning around Bay View
At about 2 miles from the coast, Bay View is close enough for sea air to matter. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. Food Standards Agency records include about 7 pubs and bars within about 1.5 miles of central Bay View. A pub or hotel kitchen that cooks every day builds up grease in its extract like any other. Kent Fire and Rescue Service covers Bay View. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
Kitchens in Bay View get a clean bill of health at the end: a TR19® certificate and a photo report.
Bay View is about 4 miles east of Minster, in Kent. Whatever kind of site you run in Bay View, we can take on extract fan cleaning. We can work out of hours so the site keeps running. Bay View is one of 922 towns, villages and districts in Kent we cover for commercial clients. You can also see our page for Maidstone, roughly 18 miles from Bay View.
Work in ME12 is surveyed, quoted and booked the same way as anywhere else. You will find streets such as Mustards Road, Warden View Gardens and Danes Drive, all of which we cover for extract fan cleaning. If your site is just outside Bay View, we cover Uplees (4 miles south), Oare (5 miles south), Conyer (5 miles south-west), Teynham Street (5 miles south-west) and The Brents (5 miles south). Larger places within reach include Canterbury (11 miles south-east), Sittingbourne (8 miles south-west), Whitstable (7 miles south-east), Faversham (6 miles south), Herne Bay (10 miles east) and Minster (4 miles west).
What we are called out for in Bay View
Grease condenses as the air cools, and on a roof or outside wall the fan can be in some of the coolest air in the system. So grease often settles heavily there.
Signs it’s time to call us include:
- A fan shaking on its mounts
- A motor area thick with grease
- A fan coated in grease inside its housing
- Weak extraction at the canopy
In and around Bay View, every reachable section of the extract is cleaned, and anything we cannot reach goes on the report.
Questions to ask before booking
- What paperwork you get at the end
- Whether the quote shows VAT
- If the quote is a fixed price or an estimate
- If they look at the system before pricing
Also near Bay View
Other services in Bay View
What staff can safely do
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. Leave those to us.
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, alongside our reports.
Your questions about extract fan cleaning in Bay View
Which council inspects kitchens in Bay View?
Food hygiene inspections in Bay View are carried out by Swale council. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.
Can sea air affect extract fan cleaning in Bay View?
It can. Bay View is within about 2 miles of the coast, and salt air speeds up corrosion. Rooftop fans, discharge cowls and fixings are checked for corrosion as well as grease.
What happens if you can’t reach some of it?
The report shows them clearly. In ductwork, new access panels are often the answer, which we can install.
Which accreditations do you hold?
Our accreditations are CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
Will we have to shut during the visit?
Not typically. We work when the area is out of use, such as evenings, overnight, early mornings or weekends, so the site can carry on as normal.
Do you work in Bay View?
Yes. We work in Bay View and the rest of Kent, within our South East and London area. To book, give us a ring on 0345 646 2711, or email photos.
Why has my extract fan got louder?
A common cause is grease. Grease collects unevenly and unbalances the impeller, causing vibration and noise. If cleaning doesn’t, the bearings or motor may need attention.
Do you survey before quoting?
Yes. We always survey first, from your pictures and details, or with a visit where needed. A fixed quote follows.
How we price extract fan cleaning
Every site gets its own quote. This is what makes a difference:
- How big the system is
- Whether we need access equipment or extra panels
- Travel, parking and unloading
- The condition we find in the survey
No two sites are the same, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all make a difference.
Asking for a quote
To speed up the quote, send us:
- A few general shots of the system
- The site address and the type of premises
- Close-ups of filters, grilles, hatches or access panels
- The times we could work without disrupting the site
If you need extract fan cleaning in Bay View, phone us on 0345 646 2711 or send us an email. Let us know the site type and the opening hours, plus photos or the previous report if they’re to hand. We normally send a fixed quote within one working day.
What a clean won’t put right
It’s worth knowing the limits before booking:
- A cracked or broken impeller (it needs replacing)
- An undersized fan that can’t cope
- A faulty speed controller or isolator
If in doubt, phone us on 0345 646 2711 or drop us a line and we’ll say what we think before you book.
Where we work
- Centrifugal fans
- Fan housings
- In-line fans
- Discharge points
- Axial fans
- Roof-mounted fans
Between visits
So the system stays in good health:
- Tell us if the extract feels weaker
- Listen for new noises or vibration from the fan
- Keep each photo report with the maintenance log
- Watch for grease marks around the outlet
When we have finished, the fan is reassembled and run. Anything we notice, like noise, vibration or a worn part, goes on the report, so you can plan any repair.
Stick to the interval for the full extract. Regular full cleans keep the fan from building up heavy deposits, in line with BESA guidance.
How the job changes from site to site
Wall fans
A wall fan pushes the air straight outside. We isolate it, then clean the blades and housing.
Roof-mounted fans
On a roof, the air is cooler and grease drops out faster. The impeller and housing are scraped and degreased.