Kent · Extract fan cleaning
Badgers Mount extract fan cleaning
For cleaning of kitchen extract fans, impellers, fan housings and discharge points in Badgers Mount, one call is all it takes: survey, fixed quote, work and sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- A fan that hums, whines or rumbles
- Grease escaping from the fan outlet
- Burning smells from the fan area
Extract fan cleaning around Badgers Mount
There are about 4 cafés, restaurants and staff canteens within about 1.5 miles of central Badgers Mount, according to the Food Standards Agency’s register. Where they cook under a canopy, an extract fan is pulling grease-laden air through its blades every service. Badgers Mount is covered by Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. It’s Sevenoaks council that sends environmental health officers to food businesses in Badgers Mount. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
For kitchens close to Knockholt station, where the day often starts early and ends late, the extract can be cleaned overnight. Volunteers running a hall kitchen near St Margaret's Church, or anywhere in Badgers Mount, may not know when the extract was last cleaned, and a grease test settles it.
Badgers Mount is about 4 miles south-east of Orpington, in Kent. Whether your site is in the middle of Badgers Mount or further out, we cover extract fan cleaning for every kind of premises, from small sites to large estates. 922 places in Kent are on our list, large and small. For sites nearby, see our London page (15 miles or so).
Work in TN14 is surveyed, quoted and booked the same way as anywhere else. We cover sites on Old London Road, Woodlands View and Orpington Bypass and nearby roads. With the A224 close by, Badgers Mount is easy for our technicians to reach at any hour. Neighbouring places we cover for extract fan cleaning include Halstead (1 mile south-west), Bopeep (1 mile north), Maypole (1 mile north), Well Hill (1 mile north) and Sepham Heath (1 mile south). Further out, we also cover Dartford (8 miles north-east), Sevenoaks (4 miles south-east), Royal Tunbridge Wells (15 miles south), Gravesend (12 miles north-east), Tonbridge (11 miles south-east) and Northfleet (11 miles north-east).
What’s near Badgers Mount
Typical jobs here are in premises near Green Street Green Primary School, Hewitt's Chalk Bank and The Cock Inn. Badgers Mount’s nearest station is Knockholt station, about 0.8 miles north-west. Well-known places in the area include Otford Heritage Centre (3 miles south-east) and Lullingstone Castle (2.5 miles north-east). The countryside around Badgers Mount includes Downe Bank Nature Reserve.
Extract fan cleaning in Badgers Mount
A fan never collects grease in a neat, even layer. Uneven build-up unbalances the impeller, which brings vibration, noise and extra wear on the bearings and motor. A thorough clean removes the cause. If you have thick grease on the impeller and casing and less air being pulled from the kitchen, we can put it right.
In a small place like Badgers Mount, kitchens are often in older or extended buildings, with long single-storey duct runs, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
Accreditations are easy to claim and worth checking. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Place
- Badgers Mount (TN14)
- Region
- Kent
- Paperwork
- Certificate and photo report
- Price
- A fixed price before we start
- When we work
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
What we do, step by step
Everything the job needs comes with us, from protective sheeting to tools and access equipment. All we need from you is clear access and the right equipment switched off. On site, the work takes a couple of hours per fan, depending on its size and the build-up. For a village or hamlet like Badgers Mount, tell us about narrow lanes, gates and parking when you book.
- The fan is found and its type, access and isolation checked.
- We isolate the power before opening the housing.
- Grease is scraped off the impeller blades and casing.
- Blades, housing and surrounds are degreased with care around the electrics.
- We reassemble, run and photograph the fan.
Getting ready for the visit
- Let us know about permits to work or site inductions
- Move anything stored near the system
- Arrange a key holder or contact on site
How to get a quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
Advice
Questions from Badgers Mount
Can you get to a site in Badgers Mount?
Yes. Badgers Mount is within the area we cover across London and the South East. Just mention lanes, gates or anything else about the site when you book.
Which environmental health team covers Badgers Mount?
Food hygiene inspections in Badgers Mount are carried out by Sevenoaks council. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.
Do you provide a report after cleaning the fan?
Photos, notes on condition and a recommended next date. Keep it with your maintenance log.
Is the fan isolated during cleaning?
The fan is isolated before we open it, so it can’t run during the clean. That means the extract is off, so we clean while the kitchen is closed.
What happens to the waste?
Anything we remove is contained as we work and taken away with us, from grease and debris to used cleaning water. We do not leave it behind.
Is there a survey before the work?
Yes. For many sites, photos and a few details are enough, and larger or hidden systems get a visit.
Is TR19 cleaning required by law?
No. TR19® is BESA’s specification, not legislation. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
How often does the fan need cleaning?
With the whole system, at intervals set by BESA guidance: every 3, 6 or 12 months. A noisy or heavily coated fan may need it sooner.
When it’s something else
To be straight with you, some problems need a different fix:
- A motor that has burnt out
- Grease in the canopy and ductwork
- A fan that’s too small for the system (a design question)
If in doubt, ring 0345 646 2711 or use the quote form and we will say what we think.
What the work covers
- Roof-mounted fans
- Axial fans
- Discharge points
- Fan housings
- In-line fans
- Centrifugal fans
What your team can do, and what needs us
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That’s our job.
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Do you need extract fan cleaning in Badgers Mount?
Grease condenses as the air cools, and a fan out on a roof or wall often sits where the air is coolest. So grease often settles heavily there.
Most sites get in touch after spotting something like this:
- Vibration from an unbalanced impeller
- A fan motor running hot under a coat of grease
- Thick grease on the impeller and casing
- Hot, greasy smells near the fan
Healthcare kitchens, like those at hospitals such as Orpington Hospital (about 2.7 miles north-west), often cook for long hours, which puts them in BESA’s heavier-use bands.
What to look for in a quote
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Whether they’re fully insured
- Whether VAT is included
- When the next visit should be, and why
What happens if it’s left?
Cleaning the fan in Badgers Mount now is a short job: the work takes a couple of hours per fan, depending on its size and the build-up. Leaving it means more wear, more noise and a bigger clean later. Planning a trip to Badgers Mount ahead is easier for everyone than a rushed one.
Every site is different, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all play a part.
Why us?
- CHAS, SafeContractor and ISO 9001
- Photo reports with every job
- Evenings, overnight and weekends, plus 24/7 emergency callout
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Take a look at what affects the cost or our accreditations and certificates.
Multi-site and managed buildings
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements, and we will send a fixed quote.
Places near Badgers Mount
Other services in Badgers Mount
How the job changes from site to site
Kitchens with long cooking hours
Kitchens that cook 12 to 16 hours a day put the most grease through their fans. Under BESA guidance, heavy use means cleaning at least every 3 months, fan included.
Roof-mounted fans
A roof fan sits in cooler air, so grease can settle heavily. The impeller and housing are scraped and degreased.