Oxfordshire · Ductwork cleaning
Ductwork Cleaning in Shillingford
Need ductwork cleaning in Shillingford? We diagnose first, fix the price and book the work around your hours, finishing with a written report and photos.
- Fat dripping from the ductwork
- An insurer asking for TR19 evidence
- High readings at a recent grease test
When something else is needed
To be straight with you, some problems need a different fix:
- A failed fan motor at the end of the duct (a fan repair job)
- Leaking duct joints that need repair
- Faulty fire dampers
If you are not sure, just call us on 0345 646 2711 or email us and we’ll give you a straight answer.
Where we work
- Horizontal duct runs
- Multi-storey ducts
- Bends and junctions
- Vertical risers
- Attenuators
- Access panels
Ductwork cleaning for kitchens and businesses in Shillingford
If the ducts in Shillingford haven’t been cleaned for a while, or nobody is sure when they were? A few details about the system are a good start when you ring 0345 646 2711 or send us an email, and we will send you a fixed quote for ductwork cleaning, normally within one working day. The work covers vertical risers, access panels and bends and junctions, and common reasons people get in touch are years of grease along the duct floor and heavy grease at the base of a riser.
Somewhere as small as Shillingford, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Every one of them still needs its extract kept clear of grease.
The paperwork matters as much as the work. You get a written report with pictures after every visit, listing what was done, anything we couldn’t reach and when the next visit is due. File it in your maintenance log so it’s to hand when an insurer or inspector asks.
- Place
- Shillingford (OX10)
- Region
- Oxfordshire
- Reporting
- TR19® certificate and photo report
- Quotes
- A fixed price before any work starts
- Hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
The process
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that’s an evening, overnight or a weekend. Once we’re in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes from a few hours to more than one visit, depending on duct length and access. We agree a date with you, plan the drive to Shillingford and turn up when the site is quiet.
- The duct route is surveyed and every access point found.
- Grease thickness is measured at set points.
- Out of hours, the area is protected and the access panels opened.
- Thick grease is scraped out, then the runs and risers are degreased.
- Panels are closed, readings and pictures repeated, and unreachable sections recorded.
How to prepare
- Make sure equipment near the work can be switched off and left to cool
- Let us know how we reach the system, including roofs, risers and plant rooms
- Let us know when the site is closed or quiet
Getting a quote
For a fixed quote, give us a ring on 0345 646 2711, or send details by email and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. We normally come back within one working day.
Read more
What ductwork cleaning looks like in Shillingford
The FSA’s food hygiene register includes about 3 hotels, B&Bs and guest houses in Shillingford and the streets around it, up to about 1.5 miles out. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. In Shillingford, food businesses are inspected by environmental health officers from South Oxfordshire council. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. A dated certificate in the maintenance file answers the question before it’s asked. Shillingford is covered by Oxfordshire Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Historic houses near Shillingford, such as Brightwell Manor about 1.8 miles south-west, are a reminder that older buildings with event kitchens can have long, awkward duct routes. Where a hall near Church of St Lawrence, or anywhere in Shillingford, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Shillingford is about 5 miles east of Didcot, in Oxfordshire. Whether your site is in the middle of Shillingford or further out, we cover ductwork cleaning for every kind of premises, from a single unit to a large public building. Shillingford is one of 443 towns, villages and districts in Oxfordshire where we work for commercial clients. Our Oxford page covers sites nearby, about 9 miles away.
Our technicians cover all of OX10 for ductwork cleaning and the streets around it. That includes premises on Warborough Road, New Road and Hartley Close and nearby roads. Other places close to Shillingford include Warborough (1 mile north), Dorchester (1 mile north-west), Brightwell-cum-Sotwell (1 mile south-west), Benson (2 miles south-east) and Berrick Salome (2 miles north-east). Within a short drive, we also cover Oxford (9 miles north-west), Didcot (5 miles west), Abingdon-on-Thames (7 miles north-west), Thame (11 miles north-east), Wantage (13 miles west) and Henley-on-Thames (12 miles south-east).
Landmarks near Shillingford
Locally, jobs take us to businesses close to The Six Bells Inn and Wallingford School and the streets around them. The nearest railway station is Cholsey station, roughly 4.3 miles south. Well-known places in the area include Aston Martin Heritage Trust Museum (1.9 miles north) and Brightwell Castle (1.7 miles south-west). Not far away are Ewelme Watercress Beds and Wittenham Clumps.
What staff can safely do
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, alongside our reports.
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
What we are called out for in Shillingford
A greasy duct is a fire path, in Shillingford as anywhere. Once it lights, fire can spread along the duct and into other areas, which is why the responsible person needs it under control.
These are the problems we see most often:
- A grease test showing the duct is overdue
- Sections of duct with no access panels
- Proof of duct cleaning for the insurer
- Ductwork that has never been cleaned
For schools such as St Laurence Church of England (A) School, kitchen extract cleaning is typically booked for the holidays, when the canteen is closed.
What your quote should include
- Whether the quote is based on a survey or photos
- What paperwork you get at the end
- Whether they’re fully insured
- Which accreditations they hold, and whether you can check them
Aftercare tips
A little care between visits keeps the system in better shape. Our advice:
- Have the grease measured if cooking hours go up
- Diarise the next duct clean
- Never cook with a filter missing
- Flag drips from the duct right away
Any section of duct we couldn’t reach is listed on the report and why. We can fit access panels so those sections are cleaned next time.
Watch for warning signs between cleans: drips from the ductwork, stale smells or a noisy fan. A grease thickness test can confirm whether a spot clean is needed.
What the work involves, part by part
Attenuators and discharge
Attenuators, where fitted, quieten the extract, but they can hold grease in their linings. They’re cleaned where possible and recorded if not.
Bends and transitions
A bend can hold far more grease than a straight run of the same length. We clean it back by hand and with degreaser, and test it before and after.
Towns and villages near Shillingford
Also in Shillingford
Shillingford questions
Can you work in Shillingford outside opening hours?
Yes, evening, overnight and weekend work is normal for us. It means the site in Shillingford keeps running as normal. When you call us on 0345 646 2711 or email us, mention when the site is quiet.
Which environmental health team covers Shillingford?
That is South Oxfordshire council, whose environmental health officers carry out food hygiene inspections in Shillingford. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.
Do you work with multi-site operators?
Yes. Tell us the addresses and what each needs and you will get one fixed quote.
Is a quote from pictures possible?
Yes, if we can see what we need. Otherwise, we book a survey at a time that suits the site, and the quote follows that.
Do you look at the system first?
Yes. For many sites, pictures and a few details are enough, and larger or hidden systems get a visit.
Do you have insurance?
Yes. Duct Doctor is fully insured, and the details are available on request.
How long does it take to clean extract ducts?
It depends on the length of the duct, the number of access panels and how much grease there is. As a guide, it takes anything from a few hours to several visits, depending on the length of duct.
What if part of the duct cannot be reached?
Ductwork needs access to be cleaned. We record those sections on the report and can fit access panels.
Managing agents and facilities teams in Shillingford
Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept on a regular cycle.
Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we will send a fixed quote.