Buckinghamshire · Ductwork cleaning
Shalstone ductwork cleaning
Specialist ductwork cleaning for Shalstone: diagnosis first, then a fixed quote, the work and a report with photos. Ask us for a fixed quote.
- Readings above 200 microns from a grease thickness test
- A duct clean needed for an insurer
- A rancid smell from the extract duct
What ductwork cleaning cannot fix
Ductwork cleaning can’t fix everything, and we’d rather say so up front. It will not put right:
- Ductwork that is corroded, split or holed (that needs a ductwork contractor)
- Fire dampers that do not close (they need testing and remedials)
- Ductwork that was poorly designed
If you’re not sure, just phone us on 0345 646 2711 or drop us a line and we’ll give you a straight answer before you book.
Where we work
- Attenuators
- Access panels
- Bends and junctions
- Horizontal duct runs
- Vertical risers
- Multi-storey ducts
Ductwork cleaning in Shalstone
Each extract duct we take on in Shalstone goes through the full routine: readings at set points, heavy grease scraped out by hand, then degreasing to suit the deposit. Readings are taken again afterwards and pictures go into your report. We’re often asked to deal with hardened, baked-on grease in long horizontal runs and grease pooling at the foot of the riser, on multi-storey ducts, vertical risers and bends and junctions.
In a small place like Shalstone, kitchens are often in older or extended buildings, with long single-storey duct runs, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
We’ve been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
- Where
- Shalstone (MK18)
- Region
- Buckinghamshire
- Paperwork
- TR19® certificate and photo report
- Quotes
- A fixed price before work begins
- Hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
What happens on the day
At the end of the visit, someone from your team can look over the work with us. Anything we couldn’t reach or that needs attention is pointed out there and then, and the same goes into the written report. The visit takes anything from a few hours to several visits, depending on the length of duct. Seeing the system in photos first means the trip to Shalstone can be planned properly.
- We start by working out how the duct runs and where it can be opened.
- We measure grease thickness at set points before cleaning.
- Access panels are opened and heavy deposits scraped out by hand.
- Next the ducts and risers are degreased, using whatever suits the deposit.
- Readings and pictures are repeated and any section we couldn’t reach is recorded.
Getting ready for the visit
- Mention any locked doors, roof access or ceiling voids
- Tell us where we can park and unload
- Have your last certificate or report to hand
Ask for a quote
Getting a quote does not take long. Call or email with a few details and you’ll usually have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Advice
What affects the quote in Shalstone
You will get a fixed price before any work starts. It’s based on:
- Travel, parking and unloading
- The number of sites or systems
- Any permits to work or inductions
- The times the site is available
What you pay reflects the actual work. That is why we survey first, from photos or on site, and why the quote is fixed before work begins.
Helping us quote
Photos let us diagnose from a distance. Try to include:
- Your opening hours and when the area is out of use
- The paperwork from the last visit, if you have it
- Any access panels or hatches you can see
- Where the plant sits or the system leaves the building, such as a roof or outside wall
To help us quote: where the site is, what it is and its opening hours, a few pictures and the last certificate or report, if there is one. Then call 0345 646 2711, or send details by email.
Signs you need ductwork cleaning in Shalstone
Wherever the kitchen is, in Shalstone or elsewhere, the duct fills in the same way: daily cooking hours, the menu and the state of the filters. Under BESA guidance, the minimum interval is 3, 6 or 12 months, by daily cooking hours.
Any of these means the system needs a check-up:
- High readings at a recent grease test
- Proof of duct cleaning for the insurer
- Gaps where access panels were never fitted
- Years of grease along the duct floor
A hall kitchen that only cooks for events, whether near Church of St Edward or elsewhere in Shalstone, still needs its extract cleaned, just less often.
What to look for in a quote
- Whether the figure could change on the day
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Whether they’re fully insured
- Whether a written report and pictures are included
Common questions in Shalstone
Can you work in Shalstone outside opening hours?
Yes. We work evenings, overnight and at weekends. The work in Shalstone can fit around your hours. Tell us your opening hours when you ask for a quote.
Who carries out food hygiene inspections in Shalstone?
In Shalstone, it’s Buckinghamshire council that carries out food hygiene inspections. It helps to keep the extract cleaning records with your food safety paperwork, so they’re ready if asked for.
Will I get a report after the ducts are cleaned?
Every clean comes with a photo report, and a full TR19 clean also comes with a certificate issued through the BESCA Vent Hygiene Elite portal. File them with the fire risk assessment.
What does TR19 mean?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It isn’t legislation, but it’s the standard people check against.
Is a quote from pictures possible?
Yes, where the pictures show enough. If not, a site survey comes first, then a fixed quote.
Can one contract cover all our sites?
Yes. Tell us the addresses and what each needs and you will get one fixed quote.
Do we lose a day’s trading?
Normally not. Booking the work out of hours means the site can carry on as normal. Bigger sites can be done in stages to keep things running.
What about areas you can’t get to?
We never leave them off the paperwork. You’ll know exactly which parts weren’t reached and why, along with a quote to put access in.
Ductwork cleaning around Shalstone
Food hygiene inspections in Shalstone are the job of Buckinghamshire council’s environmental health team. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Before-and-after pictures from each clean are a simple way to show the extract is in hand. Shalstone, about 55 miles from central London, is within our usual area. A survey and a fixed quote come first, then the visit at a time that suits you.
Historic houses near Shalstone, such as Stowe House about 2 miles east, are a reminder that older buildings with event kitchens can have long, awkward duct routes. A hospital like Brackley Community Hospital, about 3.4 miles west, is the kind of site where a kitchen may cook for patients, staff and visitors all day.
Shalstone is in Buckinghamshire. We provide ductwork cleaning for commercial premises of every kind in Shalstone and the rest of Buckinghamshire. Shalstone is one of 263 towns, villages and districts in Buckinghamshire where we work for commercial clients. You can also see our page for Milton Keynes, about 13 miles away.
Work in MK18 is surveyed, quoted and booked the same way as anywhere else. We also cover the places around Shalstone: Water Stratford (2 miles south), Dadford (2 miles north-east), Radclive (3 miles south-east) and Chackmore (3 miles east). Within a short drive, we also cover Buckingham (4 miles south-east), Winslow (10 miles south-east), Steeple Claydon (7 miles south-east), Tingewick (3 miles south), Whitchurch (14 miles south-east) and Quainton (12 miles south-east).
Around Shalstone
Other landmarks nearby include Beaumont Castle (2.6 miles south-west) and The Menagerie (2 miles east). For a walk, there’s Buckingham Sand Pit.
Between visits
No system stays clean for ever, but care slows the build-up. Our tips:
- Ask us about extra access panels where sections cannot be reached
- Keep the fan on while anything is cooking
- Flag drips from the duct straight away
- Never cook with a filter missing
When the duct is cleaned as part of a full TR19® Grease clean, a TR19 certificate is issued through the BESCA Vent Hygiene Elite portal. It records the date, the location and the technician.
Grease that never reaches the duct never needs cleaning out of it. Clean, properly seated filters are the duct’s best protection.
Landlords, agents and facilities managers
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements, and we’ll send a fixed quote.
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Each site gets its own report and pictures, so each one has its own record.
Why it’s worth doing now in Shalstone
BESA guidance says grease shouldn’t exceed a mean of 200 microns between cleans. A reading of 500 microns or more at any point means a spot clean straight away. Putting off the clean only pushes readings higher. It’s simpler to plan the work at Shalstone now than to arrange it in a hurry later.
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, and a neglected system can mean more work. If you’re unsure, ring 0345 646 2711 or drop us a line and we’ll give you an honest view and a fixed quote.
Why us?
- Survey first, then a fixed quote
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- A written report with pictures after each visit
- Work around your opening hours, with 24/7 emergency cover