Kent · Ductwork cleaning
Duct cleaning in Platt's Heath
Our technicians work in Platt's Heath on ductwork cleaning. Fixed quotes, work around your opening hours and photo reports on every job.
- Thick crusts of old grease along the duct
- Heavy grease at the base of a riser
- Grease seeping out of the duct seams
Ductwork cleaning in Platt's Heath, done properly
Between the canopy and the fan runs the ductwork, hidden above ceilings and inside walls. Every horizontal run and vertical riser collects grease along the way, and that’s where a kitchen fire can travel. We clean it from the inside, through access panels, to BESA TR19® Grease. The work covers attenuators, bends and junctions and access panels, and people most often call us about gaps where access panels were never fitted and a rancid smell from the extract duct.
Somewhere as small as Platt's Heath, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Location
- Platt's Heath (ME17)
- Wider area
- Kent
- Paperwork
- Certificate and photo report
- Quotes
- A fixed quote up front
- Working hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Checked
- 30 October 2026
The process
The visit has three parts: getting the area ready, doing the work and signing it off. Getting ready means protecting surfaces and switching off what needs to be off, and the sign-off is a written report with photos. Most of the time goes on the work itself, which takes from a few hours to more than one visit, depending on duct length and access. Visits to a village like Platt's Heath are booked in advance, at a time that suits whoever runs the site.
- Diagnosis: a survey of the duct’s route, size and access.
- A fixed quote follows, based on what we found.
- We clean section by section, working from panel to panel.
- We take extra care at bends and at the foot of risers.
- Readings, photos and a recommended next clean date complete the job.
Preparing for the visit
- Move anything stored near the system
- Mention any parking or loading restrictions
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
Ask for a quote
Some systems can be priced from photos; others need a survey. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.
Related advice
How we price ductwork cleaning
You will get a fixed price before we start. It takes into account:
- Whether we need access equipment or extra panels
- Whether several sites go on one quote
- Site requirements such as sign-in and permits
- The scale of the work
A single site or a whole portfolio, the quote is built the same way: the work involved, the access and the timing. You will have a fixed price before work begins.
What to send for a quote
When you call or email, these details help:
- The roof, plant room or outside wall the system runs to
- The site address and the type of premises
- Your opening hours and when the area is out of use
- Close-ups of filters, grilles, hatches or access panels
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and we can price many jobs without a visit.
How the job changes from site to site
Attenuators and discharge
Attenuators, where fitted, quieten the extract, but they can hold grease in their linings. They’re cleaned where possible and recorded if not.
Multi-storey and shared buildings
In a building with several floors, the duct may pass other tenants’ spaces. We plan access with you and the building manager, so the clean is done safely and quietly.
What a clean will not put right
A few issues sit outside what this work can do:
- A worn-out fan that needs replacing
- A damper stuck open in the duct
- Parts of the duct with no way in
If you’re not sure, just ring 0345 646 2711, or send details by email and we will give you a straight answer before you book.
What we work on in Platt's Heath
- Vertical risers
- Access panels
- Bends and junctions
- Multi-storey ducts
- Attenuators
- Horizontal duct runs
Why deal with it now?
Grease left in a duct in Platt's Heath hardens over time. It bakes into a hard layer that takes far longer to remove, so the later the clean, the bigger the job. It’s worth booking a check, because nobody sees inside a duct day to day.
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, which can make the next visit longer. If you are unsure, give us a ring on 0345 646 2711 or use the quote form and we’ll give you an honest view and a fixed quote.
Why Platt's Heath businesses choose us
- Trading since 2009
- Every job surveyed first
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- A fixed price before any work starts
Take a look at what affects the cost or how to check a contractor.
Grease, kitchens and Platt's Heath
Food Standards Agency records include about 5 pubs and bars in and around Platt's Heath, up to about a mile and a half out. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. Kitchens in Platt's Heath get their food hygiene inspections from Maidstone council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A TR19® certificate and photo report after each clean gives you a record to show an inspector. Fire safety in Platt's Heath falls to Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
School kitchens, at schools like Platts Heath Primary School for example, are normally cleaned in the holidays so no lunches are lost. Leeds Castle, about 3 miles north-west, is one of the historic houses near Platt's Heath; if you run event catering at a venue like that, cleans can be booked between functions. A hall kitchen that only cooks for events, whether near Church of St Nicholas or elsewhere in Platt's Heath, still needs its extract cleaned, just less often.
Platt's Heath is about 7 miles south-east of Maidstone, in Kent. If you need ductwork cleaning in Platt's Heath, it’s easy to get a fixed quote: please phone us on 0345 646 2711 or email us. Our area covers London and the South East, Platt's Heath included. Platt's Heath is one of 922 towns, villages and districts in Kent where we work for ductwork cleaning. Maidstone is in our area too, around 7 miles away.
Ductwork cleaning in ME17 is surveyed, quoted and booked the same way as anywhere else. Local streets include School Lane, Headcorn Road and Green Lane, all of which we cover for ductwork cleaning. Close by, we work in Liverton Street (1 mile south-west), Sandway (1 mile north-east), Boughton Malherbe (1 mile south-east), Fairbourne Heath (1 mile west) and Grafty Green (1 mile south). Larger places within reach include Maidstone (7 miles north-west), Ashford (10 miles south-east), Sittingbourne (9 miles north), Faversham (11 miles north-east), Minster (14 miles north) and Kings Hill (13 miles west).
Around Platt's Heath
We work in commercial kitchens and buildings around Kiln Wood, Wishful Thinker pub and The Lenham School, among other places. For rail, the closest station is Lenham station, about 1.2 miles north-east. Other landmarks nearby include The Dog Collar Museum (2.9 miles north-west) and Coldbridge Castle (1.8 miles south).
Common questions in Platt's Heath
Do you work in villages like Platt's Heath?
Yes. Platt's Heath is within the area we cover across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you work overnight in Platt's Heath?
Yes, evening, overnight and weekend work is normal for us. That way a site in Platt's Heath doesn’t have to lose a day’s trading. When you call us on 0345 646 2711 or send us an email, mention when the site is quiet.
Will I get a report after the ducts are cleaned?
A photo report, with readings and before and after pictures, plus a TR19 certificate for a full system clean. It also gives a recommended next clean date.
How can I tell if my extract ducts are dirty?
Drips, smells and weak extraction are clues, but the only sure way is to measure. Grease thickness testing shows exactly where the duct stands.
Do you work with multi-site operators?
Yes. Tell us the addresses and what each needs and we’ll quote them together.
How is kitchen extract ductwork cleaned?
After a survey and grease readings, the duct is opened up through its access panels. We clean the runs and risers section by section, then the readings are repeated.
Which accreditations do you hold?
We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
Do you have insurance?
Yes. Duct Doctor is fully insured, and the details are available on request.
Places near Platt's Heath
More services for Platt's Heath
What staff can safely do
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, which is where we come in.
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
Multi-site and managed buildings
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.
Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we’ll send a fixed quote.