Essex · Ductwork cleaning
Ductwork cleaning in Patching, Essex
Specialist ductwork cleaning for Patching: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- Thick crusts of old grease along the duct
- Thick deposits at the bottom of a vertical duct
- A duct nobody has opened in years
Ductwork cleaning for kitchens and businesses in Patching
Between the canopy and the fan runs the ductwork, hidden above ceilings and inside walls. Every horizontal run and vertical riser collects grease along the way, and that’s where a kitchen fire can travel. Our ductwork cleaning reaches inside the runs and risers through access panels, to BESA TR19® Grease. Typical jobs include gaps where access panels were never fitted and stale grease odours from the duct, across bends and junctions, access panels and multi-storey ducts.
In a smaller place like Patching, the kitchens with extract systems are more likely to be a pub, a café, a takeaway or a school or care home kitchen than a big restaurant. A kitchen that cooks fewer hours still builds up grease, so cleaning is planned around how much it cooks and what the readings show.
A written report with pictures follows every visit, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Patching (CM1)
- Region
- Essex
- Reporting
- Certificate and photo report
- Price
- Fixed quote, usually within a working day
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
What a clean will not put right
We won’t sell you work that does not address the problem, so here are the limits:
- Ductwork that was poorly designed
- Sections that can’t be reached safely without new access (those are recorded, and panels can be fitted)
- Faulty fire dampers
If you’re not sure, just call 0345 646 2711 or drop us a line and we’ll give you a straight answer before booking.
Where we work
- Attenuators
- Multi-storey ducts
- Bends and junctions
- Horizontal duct runs
- Access panels
- Vertical risers
Patching kitchens: local notes
Food Standards Agency data counts about 85 cafés, restaurants and staff canteens and about 62 takeaways within about 1.5 miles of central Patching. Where they cook under a canopy, grease doesn’t stop at the filters: it settles along the duct and up the riser. Environmental health officers from Chelmsford council inspect food businesses in Patching. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Our report lists what was cleaned and when, which is useful to have ready. Fire safety in Patching falls to Essex County Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
Term dates shape school work: for a school like St John Payne Catholic School, an extract clean fits neatly into a half-term or summer break. Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Hylands is about 3 miles south-west), access may need planning.
Patching is about 1 mile north-west of Chelmsford, in Essex. Every kind of commercial site in Patching, ductwork cleaning is something we can help with. We can work out of hours so trading is not interrupted. Across Essex, we cover 644 places, and Patching is one of them.
We work across CM1 for ductwork cleaning and the roads nearby. We cover sites on First Avenue, Sixth Avenue and Fifth Avenue and nearby roads. Patching sits on or near the A1016, so getting to you is simple for evening and night visits. We also cover Chelmsford (1 mile south-east), Broomfield (2 miles north), Moulsham (2 miles south), Chignall St James (2 miles west) and Writtle (2 miles south-west). We also work in nearby towns such as Basildon (12 miles south), Braintree (10 miles north-east), Harlow (15 miles west), Brentwood (11 miles south-west), Maldon (9 miles east) and Billericay (9 miles south).
Around Patching
Around Patching, our work takes us to kitchens and buildings near The Red Beret pub, Chelmer Valley Riverside and St Pius X Catholic Primary School and the streets around them. The closest station to Patching is Chelmsford station, about 1 mile south of the centre. Nearby you will also find Bond Street Chelmsford (1.2 miles south) and Priory Hospital (1 mile south-east). Not far away are Newland Grove.
What we’re called out for in Patching
The further the air travels from the cooking, the cooler it gets. Cooling air drops its grease onto the inside of the duct, so duct runs keep collecting grease long after the canopy.
These are the problems we see most often:
- A duct clean needed for an insurer
- Thick deposits at the bottom of a vertical duct
- Thick crusts of old grease along the duct
- A grease test showing the duct is overdue
A hospital like Priory Hospital, about 1 mile south-east, is the kind of site where a kitchen may cook for patients, staff and visitors all day.
What your quote should include
- Whether a written report and photos are included
- What’s included in the scope, part by part
- How they set the interval to the next visit
- Whether the price is fixed
Nearby places to Patching
More services for Patching
What happens on the day
When we arrive, we check the system against the survey or the photos you sent. If anything is different, we talk it through with the person on site before carrying on. From there, it takes anything from a few hours to several visits, depending on the length of duct. Tell us when your site near Patching is quiet and the visit will be booked for then.
- First we diagnose: the route, the access and the grease levels.
- A fixed quote follows, based on what we found.
- We clean section by section, working from panel to panel.
- Bends, risers and the base of each riser get extra attention.
- Readings, photos and a recommended next clean date complete the job.
Getting ready for the visit
- Have your last certificate or report to hand
- Tell us the best time to work, such as after service or at a weekend
- Let us know how we reach the system, including roofs, risers and plant rooms
Getting a quote
Need a price for ductwork cleaning? Please give us a ring on 0345 646 2711, or send details by email and tell us about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
Advice
What your team can do, and what needs us
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, next to our reports.
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
What the work involves, part by part
Vertical risers
In taller buildings, a riser may pass through several floors and fire compartments, so fire dampers may be fitted where it crosses them. We test those as a separate job.
Bends and transitions
Bends, elbows and changes of size are where grease collects most. The air slows and drops its load, so we clean these points carefully.
Looking after it afterwards
So the system stays in good health:
- Run the extract fan throughout service
- Flag drips from the duct straight away
- Keep to the interval on the report
- Do not block access panels with shelving or stock
Keep the certificate and report with the fire risk assessment. An insurer, fire officer or EHO may ask to see it, and the pictures make the duct’s condition easy to see.
Keep the fan on throughout service. When the air stops, grease settles in the duct, so switching off early adds to the build-up.
Patching questions
Which fire authority looks after Patching?
Patching is in the area of Essex County Fire and Rescue Service. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
Do you cover smaller places like Patching?
Yes, smaller places are covered as well as towns. Just mention lanes, gates or anything else about the site when you book.
How long does it take to clean extract ducts?
Allow anything from a few hours to several visits, depending on the length of duct. We will confirm the time when we quote.
How often does extract ductwork need cleaning?
At least as often as BESA guidance sets for your cooking hours. Heavy use of 12 to 16 hours a day means at least every 3 months, while lighter use can go longer.
Are you insured?
Yes. We carry full insurance, and we’ve been trading since 2009.
What shows that the ducts need a clean?
The date on the last certificate is the first thing to check. If it’s overdue, or there is not one, a clean is due, and grease readings will confirm how urgent it is.
Can you fit access panels in our ductwork?
Yes, we install duct access panels. Panels go where they give the best access to sections that couldn’t be reached, and we’ll recommend where.
Can you quote from photos?
In many cases, yes. With good pictures, the site type and your last report, we can price many jobs. Where we can’t see enough, we arrange a survey.
For landlords and multi-site operators
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.
For anyone managing more than one site, we can schedule visits across all of them on one quote. Every building has its own written report, so each one has its own record.