Kent · Ductwork cleaning
Ductwork cleaning in Minster, Kent
Looking for ductwork cleaning in Minster? We survey first, give you a fixed quote and work around your opening hours, then sign off with a report and pictures.
- Gaps where access panels were never fitted
- An insurer asking for TR19 evidence
- Readings above 200 microns from a grease thickness test
Ductwork cleaning in Minster, done properly
We’ve been trading since 2009, working across London and the South East. As a BESCA Vent Hygiene Elite member, our duct cleaning is done to BESA TR19® Grease, with each certificate issued through the BESCA portal. We’re often asked to deal with duct runs that can’t be reached and grease pooling at the foot of the riser, across multi-storey ducts, bends and junctions and vertical risers.
Somewhere as small as Minster, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
Each visit ends with a written report and pictures, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Where
- Minster (CT12)
- Region
- Kent
- Records
- Certificate and photo report
- Price
- A fixed price before any work starts
- When we work
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
How we price ductwork cleaning
There’s no set price list, because no two systems are the same. What we look at:
- Working hours and out-of-hours timing
- Travel, parking and unloading
- The number of sites or systems
- Site requirements such as sign-in and permits
Every site is different, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all make a difference.
Asking for a quote
To help us quote quickly, please include:
- Any previous report or certificate
- Detail shots of panels, filters and grilles
- A few general shots of the system
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Here’s what helps us quote: where the site is, what it is and its opening hours, a few pictures and any previous report or certificate. Once you have those, call 0345 646 2711, or send details by email.
Landlords, agents and facilities managers
Keeping records across a portfolio is half the battle. Each visit produces a dated report with pictures, so you can show an insurer or inspector what was done at each site.
Running several sites is easier with one contractor. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.
Towns and villages near Minster
Other services in Minster
The process
Your staff don’t need to do much on the day. A contact on site lets us in at the agreed time and points us to the system, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. Pictures of the system and its access let us plan the work in Minster before we set off.
- We trace the duct and find every way in.
- Grease thickness is measured at set points.
- Out of hours, the area is protected and the access panels opened.
- Thick grease is scraped out, then the runs and risers are degreased.
- We close up, re-test, photograph and record anything out of reach.
How to prepare
- Mention any sign-in, permit or induction we need
- Let us know about parking and loading
- Name a contact who can let us in at the agreed time
Getting a quote
We do not publish a price list, because no two systems are the same. We look at your system first, from pictures or on a visit, and then send you a fixed quote. To start, phone us on 0345 646 2711 or email us.
Advice
Honest limits
Some problems need a different service or another trade:
- A worn-out fan that needs replacing
- Fire dampers that don’t close (they need testing and remedials)
- Sections that cannot be reached safely without new access (those are recorded, and panels can be fitted)
If you are not sure, just phone us on 0345 646 2711, or send details by email and we will give you a straight answer.
What the work covers
- Vertical risers
- Access panels
- Multi-storey ducts
- Horizontal duct runs
- Attenuators
- Bends and junctions
What the work involves, part by part
Horizontal duct runs
A long flat run can’t be cleaned from one end. Any stretch out of reach is noted and can fit extra panels.
Bends and transitions
The join where the canopy meets the duct is a common hotspot. We clean it from the canopy side or through a nearby panel.
FAQs for Minster
Can sea air affect ductwork cleaning in Minster?
It can. Being within about 3 miles of the sea means more corrosion on metalwork in Minster than inland. We look at fans, cowls and fixings for rust as well as grease.
Do you work overnight in Minster?
Yes. We work evenings, overnight and at weekends. It means the site in Minster keeps running as normal. Tell us your opening hours when you ask for a quote.
Can you quote from photos?
Often, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Larger or hidden systems need a survey on site first.
Do you look at the system first?
Yes. Every job is surveyed first, from your pictures and details, or with a visit where needed. A fixed quote follows.
What happens if there aren’t enough access panels?
Ductwork needs access to be cleaned. We record those sections on the report and can fit access panels.
What happens if you can’t reach some of it?
Anything we can’t reach goes on the report, with photos where possible, and we tell you what would make it reachable, such as extra access panels in ductwork.
How is kitchen extract ductwork cleaned?
We open each access panel and clean the section it reaches. Grease is scraped out first, then degreased, with readings taken before and after.
Do we lose a day’s trading?
Not typically. We work when the area is out of use, such as evenings, overnight, early mornings or weekends, so the site can carry on as normal.
Leave it or put it right?
Old grease in a duct for a kitchen in Minster does not stay soft. It bakes into a hard layer that takes far longer to remove, so the later the clean, the bigger the job. Somewhere as small as Minster, losing a kitchen or building to a fault is felt by everyone who uses it.
A single site or a whole portfolio, we price it on the same basis: the work involved, the access and the timing. You’ll have a fixed price before work begins.
Why book with us
- We’re fully insured
- A single point of contact for sites across the South East and London
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Fixed quotes from a survey or photos
What ductwork cleaning looks like in Minster
At about 3 miles from the coast, Minster is close enough for sea air to matter. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. The FSA’s data shows about 3 bars, pubs and nightclubs registered within 1.5 miles or so of the middle of Minster. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. Kitchens in Minster get their food hygiene inspections from Thanet council. Extraction counts as kitchen equipment, so its condition can come up on the day. Before-and-after pictures from each clean are a simple way to show the extract is in hand.
School kitchens, at schools like Minster Church of England Primary School for example, are normally cleaned in the holidays so no lunches are lost. A hall kitchen that only cooks for events, whether near Church of Saint Mary the Virgin or elsewhere in Minster, still needs its extract cleaned, just less often. If you cook for passing trade around Minster station, the extract can be cleaned between your last and first customer.
Minster is about 4 miles west of St Lawrence, in Kent. For ductwork cleaning in and around Minster, please ring 0345 646 2711, or send details by email for a fixed quote. Our area covers London and the South East, including Minster. Minster is one of 922 places in Kent we cover for commercial clients. Maidstone is in our area too, about 34 miles from Minster.
Here we cover the CT12 postcode area for ductwork cleaning. If you need ductwork cleaning at premises on Cheney Road, Thorne Road and High Street or a nearby road, our technicians can take on the work. Close by, we work in Mount Pleasant (1 mile north-east), Way (1 mile east), Acol (2 miles north), Sevenscore (2 miles east) and Ebbsfleet (2 miles south-east). Larger places within reach include Canterbury (10 miles west), Margate (5 miles north-east), Dover (13 miles south), Ramsgate (4 miles east), Broadstairs (6 miles east) and Whitstable (12 miles west).
Around Minster
Around Minster, our work takes us to kitchens and buildings near The Bell Inn and the streets around them. Minster’s nearest station is Minster station, about 0.5 miles south-east of the centre. Nearby you will also find RAF Manston History Museum (2.1 miles north-east) and Ramsgate General Hospital (4.4 miles east). For a walk, there’s Sandwich and Pegwell Bay.
In-house cleaning or a specialist?
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That’s our job.