Isle of Wight · Ductwork cleaning
Duct cleaning in Merstone
Ductwork cleaning for Merstone, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- High readings at a recent grease test
- Grease leaking from duct joints
- Ductwork that has never been cleaned
How we handle ductwork cleaning in Merstone
Between the canopy and the fan runs the ductwork, hidden above ceilings and inside walls. Every horizontal run and vertical riser collects grease along the way, and that’s where a kitchen fire can travel. Our ductwork cleaning reaches inside the runs and risers through access panels, to BESA TR19® Grease. The work covers vertical risers, access panels and attenuators, and people most often call us about smells of old cooking grease from the ductwork and duct runs with no cleaning record.
In a village or hamlet like Merstone, the kitchens that need extract cleaning are normally a pub, a school, a care home or a hall kitchen, wherever there is one. Each still has a canopy and duct that collect grease, whatever the size of the place.
Good records are part of the job. Each visit is written up with pictures, listing what was done, anything we couldn’t reach and when the next visit is due. Keep it with your fire safety records so it’s to hand when an insurer or inspector asks.
- Place
- Merstone (PO30)
- Region
- Isle of Wight
- Paperwork
- Certificate and photo report
- Quotes
- A fixed price before work begins
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
In-house cleaning or a specialist?
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, and that is where we come in.
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We will take a look and send you a fixed quote.
How the visit works
At the end of the visit, someone from your team can look over the work with us. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. The visit takes a shift or more, depending on the length of the runs and the number of access points. If you can send photos, we can arrive in Merstone knowing what to expect.
- First the duct route is traced and every access point noted.
- Set points along the runs are tested for grease.
- We open the panels and scrape out the heaviest grease.
- Horizontal runs and risers are then degreased by the method that suits the deposit.
- Post-clean readings and pictures go into the report, with any unreachable section listed.
Getting ready for the visit
- Mention any parking or loading restrictions
- Mention any locked doors, roof access or ceiling voids
- Agree a time when the area can be out of use
Getting a quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.
Advice
Merstone kitchens: local notes
The FSA’s data shows about 5 pubs and bars registered within roughly a mile and a half of the centre of Merstone. Wherever they cook, the canopy, duct and fan collect grease just as a restaurant’s do. Merstone is covered by Hampshire and Isle of Wight Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. It’s Isle of Wight council that sends environmental health officers to food businesses in Merstone. Extraction counts as kitchen equipment, so its condition can come up on the day. Keeping each certificate and photo report on file helps show the extract is looked after.
If you run catering at a historic house or estate in the area (Arreton Manor is about 1.1 miles north), event kitchens in older buildings often have awkward duct runs that need planning.
Merstone is about 3 miles south-east of Newport, in the Isle of Wight. From the centre of Merstone to the outskirts, we cover ductwork cleaning for every kind of premises, from a single unit to a large public building. 125 places in the Isle of Wight are on our list, from busy centres to quieter spots. For sites nearby, see our Portsmouth page, about 13 miles away.
Postcode districts we cover here for ductwork cleaning: PO30. Ductwork cleaning is available to premises on Merstone Lane, Chapel Lane and Newlands and the roads around them. Neighbouring places we cover for ductwork cleaning include Arreton (1 mile north-east), Rookley (1 mile south-west), Hale Common (1 mile south-east), Rookley Green (1 mile south-west) and Blackwater (2 miles north-west). Within a short drive, we also cover Newport (3 miles north-west), Ryde (6 miles north-east), Cowes (7 miles north), Sandown (4 miles east), Shanklin (4 miles south-east) and Ventnor (5 miles south-east). If your site is somewhere remote, a little more planning is needed, so let us know when you get in touch.
What’s near Merstone
The nearest railway station is Shanklin station, about 3.8 miles south-east of the centre. Other landmarks nearby include Whitecroft Hospital (2.2 miles west) and Carisbrooke Castle (3.1 miles north-west). Green spaces nearby include Stenbury Down and Alverstone Mead.
Do you need ductwork cleaning in Merstone?
A duct with too few access doors can’t be fully cleaned. Sections between panels go uncleaned, sometimes since the system was installed, and the grease there keeps building out of sight.
If you notice any of these, it’s worth a diagnosis:
- Readings above 200 microns from a grease thickness test
- Heavy grease at the base of a riser
- Duct runs with no cleaning record
- A rancid smell from the extract duct
Healthcare kitchens can’t easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Merstone is Whitecroft Hospital, about 2.2 miles west.
Before booking anyone
- What insurance they carry
- If the quote is a fixed price or an estimate
- Whether they recommend a next date
- Proof of accreditation you can verify
Your questions about ductwork cleaning in Merstone
Do you work at weekends in Merstone?
Yes, nights and weekends are routine for us. It means the site in Merstone keeps running as normal. Your opening times are the first thing we ask for.
Will you come out to Merstone?
Yes, Merstone is part of our area, however small the site. Just mention lanes, gates or anything else about the site when you book.
Who is responsible for fire safety on the premises?
That depends on who controls the premises. Under the Fire Safety Order 2005, it’s the responsible person, which may be the employer, owner, landlord, facilities manager or managing agent.
How do you keep the site clean during the work?
By covering it before any work starts. We keep the work contained and clean down when we finish.
Can extra access doors be added to the duct?
Yes, we fit access panels where the duct needs them. It means more of the duct can be cleaned next time, and the report will show where they’re needed.
Do you work with multi-site operators?
Yes. Send the list of sites and the work at each and we will quote them together.
Where does the waste go?
We contain it and take it with us. We collect grease, debris and waste water as we go, so it does not spread.
What happens if you cannot reach some of it?
They’re marked on the report. In ductwork, new access panels are often the answer, and we can fit those.
Also near Merstone
Also in Merstone
Fixed quotes for ductwork cleaning in Merstone
The price is fixed before any work begins. It’s based on:
- Travel, parking and unloading
- How big the system is
- Any permits to work or inductions
- Whether it’s a one-off visit or part of a schedule
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will explain each part.
Helping us quote
When you call or email, it’s useful to have:
- Photos showing the whole system and its surroundings
- How we’d reach plant on a roof or in a plant room
- Your opening hours and when the area is out of use
- Problems your staff have spotted
Here’s what helps us quote: where the site is, what it is and its opening hours, a few photos and any previous report or certificate. Once you have those, call us on 0345 646 2711 or email us.
What the work involves, part by part
Attenuators and discharge
The discharge is where the duct ends and air leaves the building. It can gather grease and mark the wall or roof around it, so it’s cleaned as far as safe access allows.
Bends and transitions
A bend can hold far more grease than a straight run of the same length. It’s scraped out and degreased, and readings are taken there before and after.
Looking after it afterwards
Once we have finished, these simple steps help:
- Consider fitting panels where the report shows gaps
- Have the grease measured if cooking hours go up
- File each certificate and photo report in the maintenance log
- Keep access panels clear of stored items
File the paperwork in the maintenance log. It’s the evidence an insurer or inspector may ask for, and the pictures make the duct’s condition easy to see.
Extra access panels mean more of the duct gets cleaned each time. It does not stop grease forming, but it stops it building unseen.
Honest limits
Not every problem is solved by ductwork cleaning, and we’ll tell you before work begins. It doesn’t solve:
- Faulty fire dampers
- Duct sections that need replacing
- A failed fan motor at the end of the duct (a fan repair job)
If you are not sure, just call 0345 646 2711 or use the quote form and we will give you a straight answer before booking.
What we work on in Merstone
- Multi-storey ducts
- Attenuators
- Access panels
- Vertical risers
- Horizontal duct runs
- Bends and junctions